- 31 10月, 2008 1 次提交
-
-
由 Chuck Lever 提交于
The nlm_host_rebooted() function uses nlm_cmp_addr() to find an nsm_handle that matches the rebooted peer. In order for this to work, the passed-in address must have a proper address family. This fixes a post-2.6.28 regression introduced by commit 781b61a6, which added AF_INET6 support to nlm_cmp_addr(). Before that commit, nlm_cmp_addr() didn't care about the address family; it compared only the sin_addr.s_addr field for equality. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 04 10月, 2008 4 次提交
-
-
由 Chuck Lever 提交于
lockd accepts SM_NOTIFY calls only from a privileged process on the local system. If lockd uses an AF_INET6 listener, the sender's address (ie the local rpc.statd) will be the IPv6 loopback address, not the IPv4 loopback address. Make sure the privilege test in nlmsvc_proc_sm_notify() and nlm4svc_proc_sm_notify() works for both AF_INET and AF_INET6 family addresses by refactoring the test into a helper and adding support for IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Chuck Lever 提交于
Adjust the signature and callers of nlmclnt_grant() to pass a "struct sockaddr *" instead of a "struct sockaddr_in *" in order to support IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Do all the grace period checks in svclock.c. This simplifies the code a bit, and will ease some later changes. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Rewrite grace period code to unify management of grace period across lockd and nfsd. The current code has lockd and nfsd cooperate to compute a grace period which is satisfactory to them both, and then individually enforce it. This creates a slight race condition, since the enforcement is not coordinated. It's also more complicated than necessary. Here instead we have lockd and nfsd each inform common code when they enter the grace period, and when they're ready to leave the grace period, and allow normal locking only after both of them are ready to leave. We also expect the locks_start_grace()/locks_end_grace() interface here to be simpler to build on for future cluster/high-availability work, which may require (for example) putting individual filesystems into grace, or enforcing grace periods across multiple cluster nodes. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 23 7月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
fs/lockd/svcproc.c:115:11: warning: incorrect type in initializer (different base types) fs/lockd/svcproc.c:115:11: expected int [signed] rc fs/lockd/svcproc.c:115:11: got restricted __be32 [usertype] <noident> ... and so on... Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 16 7月, 2008 4 次提交
-
-
由 Trond Myklebust 提交于
Push it into those callback functions that actually need it. Note that all the NFS operations use their own locking, so don't need the BKL. Ditto for the rpcbind client. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this function, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_lock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. Since nlmsvc_testlock() now just uses the caller's reference, we no longer need to get or release it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this functions, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_testlock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. We take a reference to host in the place where nlmsvc_testlock() previous did a new lookup, so the reference counting is unchanged from before. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
No need to check for a NULL argument twice. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 02 2月, 2008 1 次提交
-
-
由 Oleg Drokin 提交于
In a number of places where we wish only to translate nlm_drop_reply to rpc_drop_reply errors we instead return early with rpc_drop_reply, skipping some important end-of-function cleanup. This results in reference count leaks when lockd is doing posix locking on GFS2. Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 07 5月, 2007 3 次提交
-
-
由 Marc Eshel 提交于
Rewrite nlmsvc_lock() to use the asynchronous interface. As with testlock, we answer nlm requests in nlmsvc_lock by first looking up the block and then using the results we find in the block if B_QUEUED is set, and calling vfs_lock_file() otherwise. If this a new lock request and we get -EINPROGRESS return on a non-blocking request then we defer the request. Also modify nlmsvc_unlock() to call the filesystem method if appropriate. Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Marc Eshel 提交于
Rewrite nlmsvc_testlock() to use the new asynchronous interface: instead of immediately doing a posix_test_lock(), we first look for a matching block. If the subsequent test_lock returns anything other than -EINPROGRESS, we then remove the block we've found and return the results. If it returns -EINPROGRESS, then we defer the lock request. In the case where the block we find in the first step has B_QUEUED set, we bypass the vfs_test_lock entirely, instead using the block to decide how to respond: with nlm_lck_denied if B_TIMED_OUT is set. with nlm_granted if B_GOT_CALLBACK is set. by dropping if neither B_TIMED_OUT nor B_GOT_CALLBACK is set Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Marc Eshel 提交于
Change NLM internal interface to pass more information for test lock; we need this to make sure the cookie information is pushed down to the place where we do request deferral, which is handled for testlock by the following patch. Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 13 2月, 2007 2 次提交
-
-
由 Chuck Lever 提交于
Expand the rq_addr field to allow it to contain larger addresses. Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then everywhere the 'sockaddr_in' was referenced, we use instead an accessor function (svc_addr_in) which safely casts the _storage to _in. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chuck Lever 提交于
There are loads of places where the RPC server assumes that the rq_addr fields contains an IPv4 address. Top among these are error and debugging messages that display the server's IP address. Let's refactor the address printing into a separate function that's smart enough to figure out the difference between IPv4 and IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 12月, 2006 1 次提交
-
-
由 Chuck Lever 提交于
The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 10月, 2006 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
svc_procfunc instances return __be32, not int Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2006 1 次提交
-
-
由 NeilBrown 提交于
It is possible for the ->fopen callback from lockd into nfsd to find that an answer cannot be given straight away (an upcall is needed) and so the request has to be 'dropped', to be retried later. That error status is not currently propagated back. So: Change nlm_fopen to return nlm error codes (rather than a private protocol) and define a new nlm_drop_reply code. Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply when this error comes back. Cause svc_process to drop a request which returns a status of rpc_drop_reply. [akpm@osdl.org: fix warning storm] Cc: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 5 次提交
-
-
由 Olaf Kirch 提交于
When we send a GRANTED_MSG call, we current copy the NLM cookie provided in the original LOCK call - because in 1996, some broken clients seemed to rely on this bug. However, this means the cookies are not unique, so that when the client's GRANTED_RES message comes back, we cannot simply match it based on the cookie, but have to use the client's IP address in addition. Which breaks when you have a multi-homed NFS client. The X/Open spec explicitly mentions that clients should not expect the same cookie; so one may hope that any clients that were broken in 1996 have either been fixed or rendered obsolete. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Kirch 提交于
This patch makes the SM_NOTIFY handling understand and use the nsm_handle. To make it a bit clear what is happening: nlmclent_prepare_reclaim and nlmclnt_finish_reclaim get open-coded into 'reclaimer' The result is tidied up. Then some of that functionality is moved out into nlm_host_rebooted (which calls nlmclnt_recovery which starts a thread which runs reclaimer). Also host_rebooted now finds an nsm_handle rather than a host, then then iterates over all hosts and deals with each host that shares that nsm_handle. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Kirch 提交于
This patch adds the peer's hostname (and name length) to all calls to nlm*_lookup_host functions. A subsequent patch will make use of these (is requested by a sysctl). Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Kirch 提交于
Common code from nlm4svc_proc_sm_notify and nlmsvc_proc_sm_notify is moved into a new nlm_host_rebooted. This is in preparation of a patch that will change the reboot notification handling entirely. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Kirch 提交于
This patch moves all checks of the h_monitored flag into the nsm_monitor/unmonitor functions. A subsequent patch will replace the mechanism by which we mark a host as being monitored. There is still one occurence of h_monitored outside of mon.c and that is in clntlock.c where we respond to a reboot. The subsequent patch will modify this too. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 21 3月, 2006 3 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add a helper function to simplify the freeing of NLM client requests. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently it uses nlmclnt_lookup_host(), which puts the resulting host structure on a different list. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 2月, 2006 1 次提交
-
-
由 Trond Myklebust 提交于
If 2 threads attached to the same process are blocking on different locks on different files (maybe even on different servers) but have the same lock arguments (i.e. same offset+length - actually quite common, since most processes try to lock the entire file) then the first GRANTED call that wakes one up will also wake the other. Currently when the NLM_GRANTED callback comes in, lockd walks the list of blocked locks in search of a match to the lock that the NLM server has granted. Although it checks the lock pid, start and end, it fails to check the filehandle and the server address. By checking the filehandle and server IP address, we ensure that this only happens if the locks truly are referencing the same file. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 1 次提交
-
-
由 Trond Myklebust 提交于
Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-