- 10 1月, 2018 2 次提交
-
-
由 Nishanth Menon 提交于
message->len is of type size_t and %d is incorrect format usage. Instead use %zu for handling size_t correctly. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Nishanth Menon 提交于
Switch to SPDX licensing and drop the GPL text which comes redundant. Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
- 09 1月, 2018 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and Alexander Duyck. 2) Undo unintentional UAPI change in netfilter conntrack, from Florian Westphal. 3) Revert a change to how error codes are returned from dev_get_valid_name(), it broke some apps. 4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6 dual-stack. From Eli Cooper. 5) Fix missed PMTU updates in geneve, from Xin Long. 6) Cure double free in macvlan, from Gao Feng. 7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from Mohamed Ghannam. 8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed deferral of probe when the regulator is not ready yet). 9) Missing DMA mapping error checks in 3c59x, from Neil Horman. 10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli. 11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB() isn't initialized. From Andrei Vagin. 12) Fix crashes in fib6_add(), from Wei Wang. 13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) sh_eth: fix TXALCR1 offsets mdio-sun4i: Fix a memory leak phylink: mark expected switch fall-throughs in phylink_mii_ioctl sctp: fix the handling of ICMP Frag Needed for too small MTUs sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled xen-netfront: enable device after manual module load bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc() sh_eth: fix SH7757 GEther initialization net: fec: free/restore resource in related probe error pathes uapi/if_ether.h: prevent redefinition of struct ethhdr ipv6: fix general protection fault in fib6_add() RDS: null pointer dereference in rds_atomic_free_op sh_eth: fix TSU resource handling net: stmmac: enable EEE in MII, GMII or RGMII only rtnetlink: give a user socket to get_target_net() MAINTAINERS: Update my email address. can: ems_usb: improve error reporting for error warning and error passive can: flex_can: Correct the checking for frame length in flexcan_start_xmit() can: gs_usb: fix return value of the "set_bittiming" callback ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: - One line fix to mlx4 error flow (same as mlx5 fix in last pull request, just in the mlx4 driver) - Fix a race condition in the IPoIB driver. This patch is larger than just a one line fix, but resolves a race condition in a fairly straight forward manner - Fix a locking issue in the RDMA netlink code. This patch is also larger than I would like for a late -rc. It has, however, had a week to bake in the rdma tree prior to this pull request - One line fix to fix granting remote machine access to memory that they don't need and shouldn't have - One line fix to correct the fact that our sgid/dgid pair is swapped from what you would expect when receiving an incoming connection request * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/srpt: Fix ACL lookup during login IB/srpt: Disable RDMA access by the initiator RDMA/netlink: Fix locking around __ib_get_device_by_index IB/ipoib: Fix race condition in neigh creation IB/mlx4: Fix mlx4_ib_alloc_mr error flow
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver fix from Darren Hart: "Address a wmi initcall ordering race resulting in a difficult to reproduce boot failure" * tag 'platform-drivers-x86-v4.15-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: wmi: Call acpi_wmi_init() later
-
由 Sergei Shtylyov 提交于
The TXALCR1 offsets are incorrect in the register offset tables, most probably due to copy&paste error. Luckily, the driver never uses this register. :-) Fixes: 4a55530f ("net: sh_eth: modify the definitions of register") Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe JAILLET 提交于
If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1463447 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Marcelo Ricardo Leitner says: ==================== SCTP PMTU discovery fixes This patchset fixes 2 issues with PMTU discovery that can lead to flood of retransmissions. The first patch fixes the issue for when PMTUD is disabled by the application, while the second fixes it for when its enabled. Please consider these to stable. ==================== Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
syzbot reported a hang involving SCTP, on which it kept flooding dmesg with the message: [ 246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too low, using default minimum of 512 That happened because whenever SCTP hits an ICMP Frag Needed, it tries to adjust to the new MTU and triggers an immediate retransmission. But it didn't consider the fact that MTUs smaller than the SCTP minimum MTU allowed (512) would not cause the PMTU to change, and issued the retransmission anyway (thus leading to another ICMP Frag Needed, and so on). As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU are higher than that, sctp_transport_update_pmtu() is changed to re-fetch the PMTU that got set after our request, and with that, detect if there was an actual change or not. The fix, thus, skips the immediate retransmission if the received ICMP resulted in no change, in the hope that SCTP will select another path. Note: The value being used for the minimum MTU (512, SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576, SCTP_MIN_PMTU), but such change belongs to another patch. Changes from v1: - do not disable PMTU discovery, in the light of commit 06ad3919 ("[SCTP] Don't disable PMTU discovery when mtu is small") and as suggested by Xin Long. - changed the way to break the rtx loop by detecting if the icmp resulted in a change or not Changes from v2: none See-also: https://lkml.org/lkml/2017/12/22/811Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Currently, if PMTU discovery is disabled on a given transport, but the configured value is higher than the actual PMTU, it is likely that we will get some icmp Frag Needed. The issue is, if PMTU discovery is disabled, we won't update the information and will issue a retransmission immediately, which may very well trigger another ICMP, and another retransmission, leading to a loop. The fix is to simply not trigger immediate retransmissions if PMTU discovery is disabled on the given transport. Changes from v2: - updated stale comment, noticed by Xin Long Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eduardo Otubo 提交于
When loading the module after unloading it, the network interface would not be enabled and thus wouldn't have a backend counterpart and unable to be used by the guest. The guest would face errors like: [root@guest ~]# ethtool -i eth0 Cannot get driver information: No such device [root@guest ~]# ifconfig eth0 eth0: error fetching interface information: Device not found This patch initializes the state of the netfront device whenever it is loaded manually, this state would communicate the netback to create its device and establish the connection between them. Signed-off-by: NEduardo Otubo <otubo@redhat.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: 2 small bug fixes. The first one fixes the TC Flower flow parameter passed to firmware. The 2nd one fixes the VF index range checking for iproute2 SRIOV related commands. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Duvvuru 提交于
In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: NVenkat Devvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Challa 提交于
flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to incorrect passing of pointer and size of l3_mask argument of is_wildcard(). Fixed this. Fixes: db1d36a2 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by: NSunil Challa <sunilkumar.challa@broadcom.com> Reviewed-by: NSathya Perla <sathya.perla@broadcom.com> Reviewed-by: NVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "This contains fixes for the following two non-trivial issues: - The task iterator got broken while adding thread mode support for v4.14. It was less visible because it only triggers when both cgroup1 and cgroup2 hierarchies are in use. The recent versions of systemd uses cgroup2 for process management even when cgroup1 is used for resource control exposing this issue. - cpuset CPU hotplug path could deadlock when racing against exits. There also are two patches to replace unlimited strcpy() usages with strlcpy()" * 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix css_task_iter crash on CSS_TASK_ITER_PROC cgroup: Fix deadlock in cpu hotplug path cgroup: use strlcpy() instead of strscpy() to avoid spurious warning cgroup: avoid copying strings longer than the buffers
-
由 Rafael J. Wysocki 提交于
Calling acpi_wmi_init() at the subsys_initcall() level causes ordering issues to appear on some systems and they are difficult to reproduce, because there is no guaranteed ordering between subsys_initcall() calls, so they may occur in different orders on different systems. In particular, commit 86d9f485 (mm/slab: fix kmemcg cache creation delayed issue) exposed one of these issues where genl_init() and acpi_wmi_init() are both called at the same initcall level, but the former must run before the latter so as to avoid a NULL pointer dereference. For this reason, move the acpi_wmi_init() invocation to the initcall_sync level which should still be early enough for things to work correctly in the WMI land. Link: https://marc.info/?t=151274596700002&r=1&w=2Reported-by: NJonathan McDowell <noodles@earth.li> Reported-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: NJonathan McDowell <noodles@earth.li> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
- 08 1月, 2018 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Many small fixes to show the real physical addresses of devices instead of hashed addresses. - One important fix to unbreak 32-bit SMP support: We forgot to 16-byte align the spinlocks in the assembler code. - Qemu support: The host will get a chance to sleep when the parisc guest is idle. We use the same mechanism as the power architecture by overlaying the "or %r10,%r10,%r10" instruction which is simply a nop on real hardware. * 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: qemu idle sleep support parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel parisc: Show unhashed EISA EEPROM address parisc: Show unhashed HPA of Dino chip parisc: Show initial kernel memory layout unhashed parisc: Show unhashed hardware inventory
-
由 Linus Torvalds 提交于
Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fix from John Johansen: "This fixes a regression when the kernel feature set is reported as supporting mount and policy is pinned to a feature set that does not support mount mediation" * tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix regression in mount mediation when feature set is pinned
-
由 Linus Torvalds 提交于
Merge tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "The commit 2b83ff96 for 4.15-rc6, which was fixing LED brightness setting after clearing delay_off broke the behavior on any alteration of delay_on{off} properties, due to use of a LED core helper that does too much for this particular case" * tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: core: Fix regression caused by commit 2b83ff96
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD bugfix from Richard Weinberger: "A single fix for the pxa3xx NAND driver" * tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd: mtd: nand: pxa3xx: Fix READOOB implementation
-
- 07 1月, 2018 6 次提交
-
-
由 Jacek Anaszewski 提交于
Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: - untangle sys_close() abuses in xt_bpf - deal with register_shrinker() failures in sget() * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'" sget(): handle failures of register_shrinker() mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "s390: - Two fixes for potential bitmap overruns in the cmma migration code x86: - Clear guest provided GPRs to defeat the Project Zero PoC for CVE 2017-5715" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: Scrub hardware GPRs at VM-exit KVM: s390: prevent buffer overrun on memory hotplug during migration KVM: s390: fix cmma migration for multiple memory slots
-
由 Boris Brezillon 提交于
In the current driver, OOB bytes are accessed in raw mode, and when a page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the driver must read the whole spare area (64 bytes in case of a 2k page, 16 bytes for a 512 page). The driver was only reading the free OOB bytes, which was leaving some unread data in the FIFO and was somehow leading to a timeout. We could patch the driver to read ->spare_size + ->ecc_size instead of just ->spare_size when READOOB is requested, but we'd better make in-band and OOB accesses consistent. Since the driver is always accessing in-band data in non-raw mode (with the ECC engine enabled), we should also access OOB data in this mode. That's particularly useful when using the BCH engine because in this mode the free OOB bytes are also ECC protected. Fixes: 43bcfd2b ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support") Cc: stable@vger.kernel.org Reported-by: NSean Nyekjær <sean.nyekjaer@prevas.dk> Tested-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Acked-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fix from Michael Ellerman: "Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a mapped region. The bug was introduced in the refactoring of the page fault handler we did in the previous release. Thanks to John Sperbeck" * tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux由 Radim Krčmář 提交于
KVM: s390: fixes for cmma migration Two fixes for potential bitmap overruns in the cmma migration code.
-
- 06 1月, 2018 12 次提交
-
-
由 Helge Deller 提交于
Add qemu idle sleep support when running under qemu with SeaBIOS PDC firmware. Like the power architecture we use the "or" assembler instructions, which translate to nops on real hardware, to indicate that qemu shall idle sleep. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: Richard Henderson <rth@twiddle.net> CC: stable@vger.kernel.org # v4.9+
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: "Just a few driver fixups, nothing exciting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - do not advertise multi-touch pressure support Input: hideep - fix compile error due to missing include file Input: elants_i2c - do not clobber interrupt trigger on x86 Input: joystick/analog - riscv has get_cycles() Input: elantech - add new icbody type 15 Input: ims-pcu - fix typo in the error message
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull IOMMU fixes from Alex Williamson: "Fixes via Will Deacon for arm-smmu-v3. - Fix duplicate Stream ID handling in arm-smmu-v3 - Fix arm-smmu-v3 page table ops double free" * tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio: iommu/arm-smmu-v3: Cope with duplicated Stream IDs iommu/arm-smmu-v3: Don't free page table ops twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - platform updates for setting up clock correctly - fixes to accomodate newer gcc (__builtin_trap, removed inline asm modifier) - other fixes * tag 'arc-4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: handle gcc generated __builtin_trap for older compiler ARC: handle gcc generated __builtin_trap() ARC: uaccess: dont use "l" gcc inline asm constraint modifier ARC: [plat-axs103] refactor the quad core DT quirk code ARC: [plat-axs103]: Set initial core pll output frequency ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code ARC: [plat-hsdk]: Set initial core pll output frequency ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM arc: do not use __print_symbol() ARC: Fix detection of dual-issue enabled
-
由 John Johansen 提交于
When the mount code was refactored for Labels it was not correctly updated to check whether policy supported mediation of the mount class. This causes a regression when the kernel feature set is reported as supporting mount and policy is pinned to a feature set that does not support mount mediation. BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41 Fixes: 2ea3ffb7 ("apparmor: add mount mediation") Reported-by: NFabian Grünbichler <f.gruenbichler@proxmox.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "We have two more fixes for 4.15, both aimed for stable. The leak fix is obvious, the second patch fixes a bug revealed by the refcount API, when it behaves differently than previous atomic_t and reports refs going from 0 to 1 in one case" * tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes btrfs: Fix flush bio leak
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull XFS fixes from Darrick Wong: "I have just a few fixes for bugs and resource cleanup problems this week: - Fix resource cleanup of failed quota initialization - Fix integer overflow problems wrt s_maxbytes" * tag 'xfs-4.15-fixes-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix s_maxbytes overflow problems xfs: quota: check result of register_shrinker() xfs: quota: fix missed destroy of qi_tree_lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD fix from Lee Jones: "Late bugfix to plug a leak in rtsx_pcr" * tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rtsx: Release IRQ during shutdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull more x86 pti fixes from Thomas Gleixner: "Another small stash of fixes for fallout from the PTI work: - Fix the modules vs. KASAN breakage which was caused by making MODULES_END depend of the fixmap size. That was done when the cpu entry area moved into the fixmap, but now that we have a separate map space for that this is causing more issues than it solves. - Use the proper cache flush methods for the debugstore buffers as they are mapped/unmapped during runtime and not statically mapped at boot time like the rest of the cpu entry area. - Make the map layout of the cpu_entry_area consistent for 4 and 5 level paging and fix the KASLR vaddr_end wreckage. - Use PER_CPU_EXPORT for per cpu variable and while at it unbreak nvidia gfx drivers by dropping the GPL export. The subject line of the commit tells it the other way around, but I noticed that too late. - Fix the ASM alternative macros so they can be used in the middle of an inline asm block. - Rename the BUG_CPU_INSECURE flag to BUG_CPU_MELTDOWN so the attack vector is properly identified. The Spectre mitigations will come with their own bug bits later" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm x86/tlb: Drop the _GPL from the cpu_tlbstate export x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers x86/kaslr: Fix the vaddr_end mess x86/mm: Map cpu_entry_area at the same place on 4/5 level x86/mm: Set MODULES_END to 0xffffffffff000000
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI updates from Thomas Gleixner: - A fix for a add_efi_memmap parameter regression which ensures that the parameter is parsed before it is used. - Reinstate the virtual capsule mapping as the cached copy turned out to break Quark and other things - Remove Matt Fleming as EFI co-maintainer. He stepped back a few days ago. Thanks Matt for all your great work! * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove Matt Fleming as EFI co-maintainer efi/capsule-loader: Reinstate virtual capsule mapping x86/efi: Fix kernel param add_efi_memmap regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Four bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix wrongly assigned configuration data s390: fix preemption race in disable_sacf_uaccess s390/sclp: disable FORTIFY_SOURCE for early sclp code s390/pci: handle insufficient resources during dma tlb flush
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fix from Juergen Gross: "One minor fix adjusting the kmalloc flags in the new pvcalls driver added in rc1" * tag 'for-linus-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: use GFP_ATOMIC under spin lock
-