1. 04 7月, 2018 1 次提交
  2. 03 7月, 2018 4 次提交
  3. 02 7月, 2018 1 次提交
  4. 01 7月, 2018 2 次提交
  5. 30 6月, 2018 1 次提交
  6. 27 6月, 2018 3 次提交
  7. 26 6月, 2018 1 次提交
  8. 25 6月, 2018 1 次提交
  9. 24 6月, 2018 2 次提交
  10. 23 6月, 2018 1 次提交
    • W
      rseq: Avoid infinite recursion when delivering SIGSEGV · 784e0300
      Will Deacon 提交于
      When delivering a signal to a task that is using rseq, we call into
      __rseq_handle_notify_resume() so that the registers pushed in the
      sigframe are updated to reflect the state of the restartable sequence
      (for example, ensuring that the signal returns to the abort handler if
      necessary).
      
      However, if the rseq management fails due to an unrecoverable fault when
      accessing userspace or certain combinations of RSEQ_CS_* flags, then we
      will attempt to deliver a SIGSEGV. This has the potential for infinite
      recursion if the rseq code continuously fails on signal delivery.
      
      Avoid this problem by using force_sigsegv() instead of force_sig(), which
      is explicitly designed to reset the SEGV handler to SIG_DFL in the case
      of a recursive fault. In doing so, remove rseq_signal_deliver() from the
      internal rseq API and have an optional struct ksignal * parameter to
      rseq_handle_notify_resume() instead.
      Signed-off-by: NWill Deacon <will.deacon@arm.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Cc: peterz@infradead.org
      Cc: paulmck@linux.vnet.ibm.com
      Cc: boqun.feng@gmail.com
      Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
      784e0300
  11. 19 6月, 2018 8 次提交
  12. 17 6月, 2018 1 次提交
  13. 16 6月, 2018 1 次提交
  14. 15 6月, 2018 3 次提交
  15. 14 6月, 2018 1 次提交
    • L
      Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables · 050e9baa
      Linus Torvalds 提交于
      The changes to automatically test for working stack protector compiler
      support in the Kconfig files removed the special STACKPROTECTOR_AUTO
      option that picked the strongest stack protector that the compiler
      supported.
      
      That was all a nice cleanup - it makes no sense to have the AUTO case
      now that the Kconfig phase can just determine the compiler support
      directly.
      
      HOWEVER.
      
      It also meant that doing "make oldconfig" would now _disable_ the strong
      stackprotector if you had AUTO enabled, because in a legacy config file,
      the sane stack protector configuration would look like
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_NONE is not set
        # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_STACKPROTECTOR_AUTO=y
      
      and when you ran this through "make oldconfig" with the Kbuild changes,
      it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
      been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
      CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
      used to be disabled (because it was really enabled by AUTO), and would
      disable it in the new config, resulting in:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      That's dangerously subtle - people could suddenly find themselves with
      the weaker stack protector setup without even realizing.
      
      The solution here is to just rename not just the old RECULAR stack
      protector option, but also the strong one.  This does that by just
      removing the CC_ prefix entirely for the user choices, because it really
      is not about the compiler support (the compiler support now instead
      automatially impacts _visibility_ of the options to users).
      
      This results in "make oldconfig" actually asking the user for their
      choice, so that we don't have any silent subtle security model changes.
      The end result would generally look like this:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_STACKPROTECTOR=y
        CONFIG_STACKPROTECTOR_STRONG=y
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      where the "CC_" versions really are about internal compiler
      infrastructure, not the user selections.
      Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      050e9baa
  16. 13 6月, 2018 2 次提交
    • K
      treewide: kzalloc() -> kcalloc() · 6396bb22
      Kees Cook 提交于
      The kzalloc() function has a 2-factor argument form, kcalloc(). This
      patch replaces cases of:
      
              kzalloc(a * b, gfp)
      
      with:
              kcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kzalloc(a * b * c, gfp)
      
      with:
      
              kzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kzalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc
      + kcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(sizeof(THING) * C2, ...)
      |
        kzalloc(sizeof(TYPE) * C2, ...)
      |
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(C1 * C2, ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      6396bb22
    • K
      treewide: kmalloc() -> kmalloc_array() · 6da2ec56
      Kees Cook 提交于
      The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
      patch replaces cases of:
      
              kmalloc(a * b, gfp)
      
      with:
              kmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kmalloc(a * b * c, gfp)
      
      with:
      
              kmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The tools/ directory was manually excluded, since it has its own
      implementation of kmalloc().
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kmalloc
      + kmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(sizeof(THING) * C2, ...)
      |
        kmalloc(sizeof(TYPE) * C2, ...)
      |
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(C1 * C2, ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      6da2ec56
  17. 08 6月, 2018 1 次提交
    • L
      mm: introduce ARCH_HAS_PTE_SPECIAL · 3010a5ea
      Laurent Dufour 提交于
      Currently the PTE special supports is turned on in per architecture
      header files.  Most of the time, it is defined in
      arch/*/include/asm/pgtable.h depending or not on some other per
      architecture static definition.
      
      This patch introduce a new configuration variable to manage this
      directly in the Kconfig files.  It would later replace
      __HAVE_ARCH_PTE_SPECIAL.
      
      Here notes for some architecture where the definition of
      __HAVE_ARCH_PTE_SPECIAL is not obvious:
      
      arm
       __HAVE_ARCH_PTE_SPECIAL which is currently defined in
      arch/arm/include/asm/pgtable-3level.h which is included by
      arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
      So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.
      
      powerpc
      __HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
       - arch/powerpc/include/asm/book3s/64/pgtable.h
       - arch/powerpc/include/asm/pte-common.h
      The first one is included if (PPC_BOOK3S & PPC64) while the second is
      included in all the other cases.
      So select ARCH_HAS_PTE_SPECIAL all the time.
      
      sparc:
      __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
      defined(__arch64__) which are defined through the compiler in
      sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
      So select ARCH_HAS_PTE_SPECIAL if SPARC64
      
      There is no functional change introduced by this patch.
      
      Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
      Suggested-by: NJerome Glisse <jglisse@redhat.com>
      Reviewed-by: NJerome Glisse <jglisse@redhat.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Rich Felker <dalias@libc.org>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Vineet Gupta <vgupta@synopsys.com>
      Cc: Palmer Dabbelt <palmer@sifive.com>
      Cc: Albert Ou <albert@sifive.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Robin Murphy <robin.murphy@arm.com>
      Cc: Christophe LEROY <christophe.leroy@c-s.fr>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3010a5ea
  18. 07 6月, 2018 1 次提交
    • M
      regulator: gpio: Revert · e536700e
      Mark Brown 提交于
      regulator: fixed/gpio: Revert GPIO descriptor changes due to platform breakage
      
      Commit 6059577c "regulator: fixed: Convert to use GPIO descriptor
      only" broke at least the ams-delta platform since the lookup tables
      added to the board files use the function name "enable" while the driver
      uses NULL causing the regulator to not acquire and control the enable
      GPIOs.  Revert that and a couple of other commits that are caught up
      with it to fix the issue:
      
      2b6c00c1 "ARM: pxa, regulator: fix building ezx e680"
      6059577c "regulator: fixed: Convert to use GPIO descriptor only"
      37bed97f "regulator: gpio: Get enable GPIO using GPIO descriptor"
      Reported-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
      Signed-off-by: NMark Brown <broonie@kernel.org>
      e536700e
  19. 06 6月, 2018 3 次提交
    • M
      arm: Wire up restartable sequences system call · 338035ed
      Mathieu Desnoyers 提交于
      Wire up the rseq system call on 32-bit ARM.
      
      This provides an ABI improving the speed of a user-space getcpu
      operation on ARM by skipping the getcpu system call on the fast path, as
      well as improving the speed of user-space operations on per-cpu data
      compared to using load-linked/store-conditional.
      Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Watson <davejwatson@fb.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Chris Lameter <cl@linux.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Andrew Hunter <ahh@google.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
      Cc: Paul Turner <pjt@google.com>
      Cc: Boqun Feng <boqun.feng@gmail.com>
      Cc: Josh Triplett <josh@joshtriplett.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Ben Maurer <bmaurer@fb.com>
      Cc: linux-api@vger.kernel.org
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Link: https://lkml.kernel.org/r/20180602124408.8430-6-mathieu.desnoyers@efficios.com
      338035ed
    • M
      arm: Add syscall detection for restartable sequences · b74406f3
      Mathieu Desnoyers 提交于
      Syscalls are not allowed inside restartable sequences, so add a call to
      rseq_syscall() at the very beginning of system call exiting path for
      CONFIG_DEBUG_RSEQ=y kernel. This could help us to detect whether there
      is a syscall issued inside restartable sequences.
      Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Watson <davejwatson@fb.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Chris Lameter <cl@linux.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Andrew Hunter <ahh@google.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
      Cc: Paul Turner <pjt@google.com>
      Cc: Boqun Feng <boqun.feng@gmail.com>
      Cc: Josh Triplett <josh@joshtriplett.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Ben Maurer <bmaurer@fb.com>
      Cc: linux-api@vger.kernel.org
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Link: https://lkml.kernel.org/r/20180602124408.8430-5-mathieu.desnoyers@efficios.com
      b74406f3
    • M
      arm: Add restartable sequences support · 9800b9dc
      Mathieu Desnoyers 提交于
      Call the rseq_handle_notify_resume() function on return to
      userspace if TIF_NOTIFY_RESUME thread flag is set.
      
      Perform fixup on the pre-signal frame when a signal is delivered on top
      of a restartable sequence critical section.
      Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Watson <davejwatson@fb.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Chris Lameter <cl@linux.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Andrew Hunter <ahh@google.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
      Cc: Paul Turner <pjt@google.com>
      Cc: Boqun Feng <boqun.feng@gmail.com>
      Cc: Josh Triplett <josh@joshtriplett.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Ben Maurer <bmaurer@fb.com>
      Cc: linux-api@vger.kernel.org
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Link: https://lkml.kernel.org/r/20180602124408.8430-4-mathieu.desnoyers@efficios.com
      9800b9dc
  20. 05 6月, 2018 2 次提交