Create a new header, and hide the device assignment functions there.
Move struct kvm_assigned_dev_kernel to assigned-dev.c by modifying
arch/x86/kvm/iommu.c to take a PCI device struct.

Based on a patch by Radim Krcmar <rkrcmark@redhat.com>.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This feature is not supported inside KVM guests yet, because we do not emulate
MSR_IA32_XSS.  Mask it out.

Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that ia64 is gone, we can hide deprecated device assignment in x86.

Notable changes:
 - kvm_vm_ioctl_assigned_device() was moved to x86/kvm_arch_vm_ioctl()

The easy parts were removed from generic kvm code, remaining
 - kvm_iommu_(un)map_pages() would require new code to be moved
 - struct kvm_assigned_dev_kernel depends on struct kvm_irq_ack_notifier
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM ia64 is no longer present so new applications shouldn't use them.
The main problem is that they most likely didn't work even before,
because of a conflict in the #defines:

  #define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
  #define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)

The argument to KVM_SET_GUEST_DEBUG is:

  struct kvm_guest_debug {
  	__u32 control;
  	__u32 pad;
  	struct kvm_guest_debug_arch arch;
  };

  struct kvm_guest_debug_arch {
  };

meaning that sizeof(struct kvm_guest_debug) == sizeof(void *) == 8
and KVM_SET_GUEST_DEBUG == KVM_IA64_VCPU_SET_STACK.

KVM_SET_GUEST_DEBUG is handled in virt/kvm/kvm_main.c before even calling
kvm_arch_vcpu_ioctl (which would have handled KVM_IA64_VCPU_SET_STACK),
so KVM_IA64_VCPU_SET_STACK would just return -EINVAL.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ia64 does not need them anymore.  Ack notifiers become x86-specific
too.
Suggested-by: NGleb Natapov <gleb@kernel.org>
Reviewed-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm/ia64 is gone, clean up Documentation too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM for ia64 has been marked as broken not just once, but twice even,
and the last patch from the maintainer is now roughly 5 years old.
Time for it to rest in peace.
Acked-by: NGleb Natapov <gleb@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove FIXME comments about needing fault addresses to be returned.  These
are propaagated from walk_addr_generic to gva_to_gpa and from there to
ops->read_std and ops->write_std.
Signed-off-by: NNicholas Krause <xerofoify@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The check on the higher limit of the segment, and the check on the
maximum accessible size, is the same for both expand-up and
expand-down segments.  Only the computation of "lim" varies.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

register_address has been a duplicate of address_mask ever since the
ancestor of __linearize was born in 90de84f5 (KVM: x86 emulator:
preserve an operand's segment identity, 2010-11-17).

However, we can put it to a better use by including the call to reg_read
in register_address.  Similarly, the call to reg_rmw can be moved to
register_address_increment.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In __linearize there is check of the condition whether to check if masking of
the linear address is needed.  It occurs immediately after switch that
evaluates the same condition.  Merge them.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When SS is used using a non-canonical address, an #SS exception is generated on
real hardware.  KVM emulator causes a #GP instead. Fix it to behave as real x86
CPU.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If branch (e.g., jmp, ret) causes limit violations, since the target IP >
limit, the #GP exception occurs before the branch.  In other words, the RIP
pushed on the stack should be that of the branch and not that of the target.

To do so, we can call __linearize, with new EIP, which also saves us the code
which performs the canonical address checks. On the case of assigning an EIP >=
2^32 (when switching cs.l), we also safe, as __linearize will check the new EIP
does not exceed the limit and would trigger #GP(0) otherwise.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When segment is accessed, real hardware does not perform any privilege level
checks.  In contrast, KVM emulator does. This causes some discrepencies from
real hardware. For instance, reading from readable code segment may fail due to
incorrect segment checks. In addition, it introduces unnecassary overhead.

To reference Intel SDM 5.5 ("Privilege Levels"): "Privilege levels are checked
when the segment selector of a segment descriptor is loaded into a segment
register." The SDM never mentions privilege level checks during memory access,
except for loading far pointers in section 5.10 ("Pointer Validation"). Those
are actually segment selector loads and are emulated in the similarily (i.e.,
regardless to __linearize checks).

This behavior was also checked using sysexit. A data-segment whose DPL=0 was
loaded, and after sysexit (CPL=3) it is still accessible.

Therefore, all the privilege level checks in __linearize are removed.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When performing segmented-read/write in the emulator for stack operations, it
ignores the stack size, and uses the ad_bytes as indication for the pointer
size. As a result, a wrong address may be accessed.

To fix this behavior, we can remove the masking of address in __linearize and
perform it beforehand.  It is already done for the operands (so currently it is
inefficiently done twice). It is missing in two cases:
1. When using rip_relative
2. On fetch_bit_operand that changes the address.

This patch masks the address on these two occassions, and removes the masking
from __linearize.

Note that it does not mask EIP during fetch. In protected/legacy mode code
fetch when RIP >= 2^32 should result in #GP and not wrap-around. Since we make
limit checks within __linearize, this is the expected behavior.

Partial revert of commit 518547b3 (KVM: x86: Emulator does not
calculate address correctly, 2014-09-30).
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 10e38fc7cab6 ("KVM: x86: Emulator flag for instruction that only support
16-bit addresses in real mode") introduced NoBigReal for instructions such as
MONITOR. Apparetnly, the Intel SDM description that led to this patch is
misleading.  Since no instruction is using NoBigReal, it is safe to remove it,
we fully understand what the SDM means.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

MMIO_MAX_GEN is the same as MMIO_GEN_MASK.  Use only one.
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead, just use PFERR_{FETCH, PRESENT, WRITE}_MASK
inside handle_ept_violation() for slightly better code.
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

apic_find_highest_irr assumes irr_pending is set if any vector in APIC_IRR is
set.  If this assumption is broken and apicv is disabled, the injection of
interrupts may be deferred until another interrupt is delivered to the guest.
Ultimately, if no other interrupt should be injected to that vCPU, the pending
interrupt may be lost.

commit 56cc2406 ("KVM: nVMX: fix "acknowledge interrupt on exit" when APICv
is in use") changed the behavior of apic_clear_irr so irr_pending is cleared
after setting APIC_IRR vector. After this commit, if apic_set_irr and
apic_clear_irr run simultaneously, a race may occur, resulting in APIC_IRR
vector set, and irr_pending cleared. In the following example, assume a single
vector is set in IRR prior to calling apic_clear_irr:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic_clear_vector(...);
					vec = apic_search_irr(apic);
					// => vec == -1
apic_set_vector(...);
					apic->irr_pending = (vec != -1);
					// => apic->irr_pending == false

Nonetheless, it appears the race might even occur prior to this commit:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic->irr_pending = false;
					apic_clear_vector(...);
					if (apic_search_irr(apic) != -1)
						apic->irr_pending = true;
					// => apic->irr_pending == false
apic_set_vector(...);

Fixing this issue by:
1. Restoring the previous behavior of apic_clear_irr: clear irr_pending, call
   apic_clear_vector, and then if APIC_IRR is non-zero, set irr_pending.
2. On apic_set_irr: first call apic_set_vector, then set irr_pending.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Logical destination mode can be used to send NMI IPIs even when all
APICs are software disabled, so if all APICs are software disabled we
should still look at the DFRs.

So the DFRs should all be the same, even if some or all APICs are
software disabled.  However, the SDM does not say this, so tweak
the logic as follows:

- if one APIC is enabled and has LDR != 0, use that one to build the map.
This picks the right DFR in case an OS is only setting it for the
software-enabled APICs, or in case an OS is using logical addressing
on some APICs while leaving the rest in reset state (using LDR was
suggested by Radim).

- if all APICs are disabled, pick a random one to build the map.
We use the last one with LDR != 0 for simplicity.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, the APIC logical map does not consider VCPUs whose local-apic is
software-disabled.  However, NMIs, INIT, etc. should still be delivered to such
VCPUs. Therefore, the APIC mode should first be determined, and then the map,
considering all VCPUs should be constructed.

To address this issue, first find the APIC mode, and only then construct the
logical map.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The update_memslots invocation is only needed in one case.  Make
the code clearer by moving it to __kvm_set_memory_region, and
removing the wrapper around insert_memslot.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The two kmemdup invocations can be unified.  I find that the new
placement of the comment makes it easier to see what happens.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This completes the optimization from the previous patch, by
removing the KVM_MEM_SLOTS_NUM-iteration loop from insert_memslot.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

memslots is a sorted array.  When a slot is changed, heapsort (lib/sort.c)
would take O(n log n) time to update it; an optimized insertion sort will
only cost O(n) on an array with just one item out of order.

Replace sort() with a custom sort that takes advantage of memslots usage
pattern and the known position of the changed slot.

performance change of 128 memslots insertions with gradually increasing
size (the worst case):

      heap sort   custom sort
max:  249747      2500 cycles

with custom sort alg taking ~98% less then original
update time.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

With the 3 private slots, this gives us 512 slots total.
Motivation for this is in addition to assigned devices
support more memory hotplug slots, where 1 slot is
used by a hotplugged memory stick.
It will allow to support upto 256 hotplug memory
slots and leave 253 slots for assigned devices and
other devices that use them.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When running the tsc_adjust kvm-unit-test on an AMD processor with the
IA32_TSC_ADJUST feature enabled, the WARN_ON in svm_adjust_tsc_offset can be
triggered. This WARN_ON checks for a negative adjustment in case __scale_tsc
is called; however it may trigger unnecessary warnings.

This patch moves the WARN_ON to trigger only if __scale_tsc will actually be
called from svm_adjust_tsc_offset. In addition make adj in kvm_set_msr_common
s64 since this can have signed values.
Signed-off-by: NChris J Arges <chris.j.arges@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's nothing to switch if the host and guest values are the same.
I am unable to find evidence that this makes any difference
whatsoever.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
[I could see a difference on Nehalem.  From 5 runs:

 userspace exit, guest!=host   12200 11772 12130 12164 12327
 userspace exit, guest=host    11983 11780 11920 11919 12040
 lightweight exit, guest!=host  3214  3220  3238  3218  3337
 lightweight exit, guest=host   3178  3193  3193  3187  3220

 This passes the t-test with 99% confidence for userspace exit,
 98.5% confidence for lightweight exit. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At least on Sandy Bridge, letting the CPU switch IA32_EFER is much
faster than switching it manually.

I benchmarked this using the vmexit kvm-unit-test (single run, but
GOAL multiplied by 5 to do more iterations):

Test                                  Before      After    Change
cpuid                                   2000       1932    -3.40%
vmcall                                  1914       1817    -5.07%
mov_from_cr8                              13         13     0.00%
mov_to_cr8                                19         19     0.00%
inl_from_pmtimer                       19164      10619   -44.59%
inl_from_qemu                          15662      10302   -34.22%
inl_from_kernel                         3916       3802    -2.91%
outl_to_kernel                          2230       2194    -1.61%
mov_dr                                   172        176     2.33%
ipi                                (skipped)  (skipped)
ipi+halt                           (skipped)  (skipped)
ple-round-robin                           13         13     0.00%
wr_tsc_adjust_msr                       1920       1845    -3.91%
rd_tsc_adjust_msr                       1892       1814    -4.12%
mmio-no-eventfd:pci-mem                16394      11165   -31.90%
mmio-wildcard-eventfd:pci-mem           4607       4645     0.82%
mmio-datamatch-eventfd:pci-mem          4601       4610     0.20%
portio-no-eventfd:pci-io               11507       7942   -30.98%
portio-wildcard-eventfd:pci-io          2239       2225    -0.63%
portio-datamatch-eventfd:pci-io         2250       2234    -0.71%

I haven't explicitly computed the significance of these numbers,
but this isn't subtle.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
[The results were reproducible on all of Nehalem, Sandy Bridge and
 Ivy Bridge.  The slowness of manual switching is because writing
 to EFER with WRMSR triggers a TLB flush, even if the only bit you're
 touching is SCE (so the page table format is not affected).  Doing
 the write as part of vmentry/vmexit, instead, does not flush the TLB,
 probably because all processors that have EPT also have VPID. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PCIDs are only supported in 64-bit mode.  No need to clear bit 63
of CR3 unless the host is 64-bit.

Reported by Fengguang Wu's autobuilder.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The new trace event records:
  * the id of vcpu being updated
  * the pvclock_vcpu_time_info struct being written to guest memory

This is useful for debugging pvclock bugs, such as the bug fixed by
"[PATCH] kvm: x86: Fix kvm clock versioning.".
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm updates the version number for the guest paravirt clock structure by
incrementing the version of its private copy. It does not read the guest
version, so will write version = 2 in the first update for every new VM,
including after restoring a saved state. If guest state is saved during
reading the clock, it could read and accept struct fields and guest TSC
from two different updates. This changes the code to increment the guest
version and write it back.
Signed-off-by: NOwen Hofmann <osh@google.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 3b32004a ("KVM: x86: movnti minimum op size of 32-bit is not kept")
did not fully fix the minimum operand size of MONTI emulation. Still, MOVNTI
may be mistakenly performed using 16-bit opsize.

This patch add No16 flag to mark an instruction does not support 16-bits
operand size.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the guest writes to the TSC, the masterclock TSC copy must be
updated as well along with the TSC_OFFSET update, otherwise a negative
tsc_timestamp is calculated at kvm_guest_time_update.

Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to
"if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)"
becomes redundant, so remove the do_request boolean and collapse
everything into a single condition.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that KVM injects #UD on "unhandlable" error, it makes better sense to
return such error on sysenter instead of directly injecting #UD to the guest.
This allows to track more easily the unhandlable cases the emulator does not
support.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

APIC base relocation is unsupported by KVM. If anyone uses it, the least should
be to report a warning in the hypervisor.

Note that KVM-unit-tests uses this feature for some reason, so running the
tests triggers the warning.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 7fe864dc (KVM: x86: Mark VEX-prefix instructions emulation as
unimplemented, 2014-06-02) marked VEX instructions as such in protected
mode.  VEX-prefix instructions are not supported relevant on real-mode
and VM86, but should cause #UD instead of being decoded as LES/LDS.

Fix this behaviour to be consistent with real hardware.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
[Check for mod == 3, rather than 2 or 3. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Task-switch emulation checks the privilege level prior to performing the
task-switch.  This check is incorrect in the case of task-gates, in which the
tss.dpl is ignored, and can cause superfluous exceptions.  Moreover this check
is unnecassary, since the CPU checks the privilege levels prior to exiting.
Intel SDM 25.4.2 says "If CALL or JMP accesses a TSS descriptor directly
outside IA-32e mode, privilege levels are checked on the TSS descriptor" prior
to exiting.  AMD 15.14.1 says "The intercept is checked before the task switch
takes place but after the incoming TSS and task gate (if one was involved) have
been checked for correctness."

This patch removes the CPL checks for CALL and JMP.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When emulating LTR/LDTR/LGDT/LIDT, #GP should be injected if the base is
non-canonical. Otherwise, VM-entry will fail.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>