- 07 5月, 2013 6 次提交
-
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 David Sterba 提交于
This mount option was a workaround when subvol= assumed path relative to the default subvolume, not the toplevel one. This was fixed long time ago and subvolrootid has no effect. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Simon Kirby 提交于
With more than one btrfs volume mounted, it can be very difficult to find out which volume is hitting an error. btrfs_error() will print this, but it is currently rigged as more of a fatal error handler, while many of the printk()s are currently for debugging and yet-unhandled cases. This patch just changes the functions where the device information is already available. Some cases remain where the root or fs_info is not passed to the function emitting the error. This may introduce some confusion with volumes backed by multiple devices emitting errors referring to the primary device in the set instead of the one on which the error occurred. Use btrfs_printk(fs_info, format, ...) rather than writing the device string every time, and introduce macro wrappers ala XFS for brevity. Since the function already cannot be used for continuations, print a newline as part of the btrfs_printk() message rather than at each caller. Signed-off-by: NSimon Kirby <sim@hostway.ca> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 David Sterba 提交于
The transaction abort stacktrace is printed only once per module lifetime, but we'd like to see it each time it happens per mounted filesystem. Introduce a fs_state flag that records it. Tweak the messages around abort: * add error number to the first abort * print the exact negative errno from btrfs_decode_error * clean up btrfs_decode_error and callers * no dots at the end of the messages Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We keep hitting bugs in the tree log replay because btrfs_remove_free_space doesn't account for some corner case. So add a bunch of tests to try and fully test btrfs_remove_free_space since the only time it is called is during tree log replay. These tests all finish successfully, so as we find more of these bugs we need to add to these tests to make sure we don't regress in fixing things. I've hidden the tests behind a Kconfig option, but they take no time to run so all btrfs developers should have this turned on all the time. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 04 3月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Acked-by: NKees Cook <keescook@chromium.org> Reported-by: NKees Cook <keescook@google.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 21 2月, 2013 8 次提交
-
-
由 Miao Xie 提交于
If we remount the fs to close the auto defragment or make the fs R/O, we should stop the auto defragment. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Miao Xie 提交于
In some cases, we need commit the current transaction, but don't want to start a new one if there is no running transaction, so we introduce the function - btrfs_attach_transaction(), which can catch the current transaction, and return -ENOENT if there is no running transaction. But no running transaction doesn't mean the current transction completely, because we removed the running transaction before it completes. In some cases, it doesn't matter. But in some special cases, such as freeze fs, we hope the transaction is fully on disk, it will introduce some bugs, for example, we may feeze the fs and dump the data in the disk, if the transction doesn't complete, we would dump inconsistent data. So we need fix the above problem for those cases. We fixes this problem by introducing a function: btrfs_attach_transaction_barrier() if we hope all the transaction is fully on the disk, even they are not running, we can use this function. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Eric Sandeen 提交于
__btrfs_std_error didn't always properly call va_end, and might call va_start even if fmt was NULL. Move all the varargs handling into the block where we have fmt. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Eric Sandeen 提交于
This keeps static checkers happy. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Eric Sandeen 提交于
At least backref_tree_panic() can apparently pass in a null fs_info, so handle that in __btrfs_panic to get the message out on the console. The btrfs_panic macro also uses fs_info, but that's largely pointless; it's testing to see if BTRFS_MOUNT_PANIC_ON_FATAL_ERROR is not set. But if it *were* set, __btrfs_panic() would have, well, paniced and we wouldn't be here, testing it! So just BUG() at this point. And since we only use fs_info once now, just use it directly. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Eric Sandeen 提交于
Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
There is no lock to protect fs_info->fs_state, it will introduce some problems, such as the value may be covered by the other task when several tasks modify it. For example: Task0 - CPU0 Task1 - CPU1 mov %fs_state rax or $0x1 rax mov %fs_state rax or $0x2 rax mov rax %fs_state mov rax %fs_state The expected value is 3, but in fact, it is 2. Though this problem doesn't happen now (because there is only one flag currently), the code is error prone, if we add other flags, the above problem will happen to a certainty. Now we use bit operation for it to fix the above problem. In this way, we can make the code more robust and be easy to add new flags. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
fs_info->alloc_start is a 64bits variant, can be accessed by multi-task, but it is not protected strictly, it can be changed while we are accessing it. On 32bit machine, we will get wrong value because we access it by two instructions.(In fact, it is also possible that the same problem happens on the 64bit machine, because the compiler may split the 64bit operation into two 32bit operation.) For example: Assuming -> alloc_start is 0x0000 0000 0001 0000 at the beginning, then we remount and set ->alloc_start to 0x0000 0100 0000 0000. Task0 Task1 load high 32 bits set high 32 bits set low 32 bits load low 32 bits Task1 will get 0. This patch fixes this problem by using two locks to protect it fs_info->chunk_mutex sb->s_umount On the read side, we just need get one of these two locks, and on the write side, we must lock all of them. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 20 2月, 2013 2 次提交
-
-
由 Filipe Brandenburger 提交于
The header file will then be installed under /usr/include/linux so that userspace applications can refer to Btrfs ioctls by name and use the same structs used internally in the kernel. Signed-off-by: NFilipe Brandenburger <filbranden@google.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
The delayed reference allocation is in the fast path of the IO, so use slabs to improve the speed of the allocation. And besides that, it can do check for leaked objects when the module is removed. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
- 25 1月, 2013 1 次提交
-
-
由 Miao Xie 提交于
We may access and update transaction->aborted on the different CPUs without lock, so we need ACCESS_ONCE() wrapper to prevent the compiler from creating unsolicited accesses and make sure we can get the right value. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 17 12月, 2012 1 次提交
-
-
由 Miao Xie 提交于
The auto defrag allocation is in the fast path of the IO, so use slabs to improve the speed of the allocation. And besides that, it can do check for leaked objects when the module is removed. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 13 12月, 2012 6 次提交
-
-
由 Stefan Behrens 提交于
This commit contains all the essential changes to the core code of Btrfs for support of the device replace procedure. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
Remove the attempt to cancel a running scrub or device replace operation in btrfs_handle_error() because it adds the risk of a deadlock. The only penalty of not canceling the operation is that some I/O remains active until the procedure completes. This is basically the same thing that happens to other tasks that are running in user mode context, they are not affected or stopped in btrfs_handle_error(), these tasks just need to handle write errors correctly. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
The current behavior is to allow mounting or remounting a filesystem writeable in degraded mode if at least one writeable device is present. The next failed write access to a missing device which is above the tolerance of the configured level of redundancy results in an read-only enforcement. Even without this, the next time barrier_all_devices() is called and more devices are missing than tolerable, the switch to read-only mode takes place. In order to behave predictably and to provide proper feedback to the user at mount time, this patch compares the number of missing devices with the number of devices that are tolerated to be missing according to the configured RAID level. If more devices are missing than tolerated, e.g. if two devices are missing in case of RAID1, only a read-only mount and remount is allowed. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 09 10月, 2012 3 次提交
-
-
由 Andrei Popa 提交于
If a filesystem is mounted with compression and then remounted by adding nodatacow, the compression is disabled but the compress flag is still visible. Also, if a filesystem is mounted with nodatacow and then remounted with compression, nodatacow flag is still present but it's not active. This patch: - removes compress flags and notifies that the compression has been disabled if the filesystem is mounted with nodatacow - removes nodatacow and nodatasum flags if mounted with compress. Signed-off-by: NAndrei Popa <andrei.popa@i-neo.ro>
-
由 Daniel J Blueman 提交于
Fix various messages to include newline and module prefix. Signed-off-by: NDaniel J Blueman <daniel@quora.org>
-
由 Miao Xie 提交于
With the following debug patch: static int btrfs_freeze(struct super_block *sb) { + struct btrfs_fs_info *fs_info = btrfs_sb(sb); + struct btrfs_transaction *trans; + + spin_lock(&fs_info->trans_lock); + trans = fs_info->running_transaction; + if (trans) { + printk("Transid %llu, use_count %d, num_writer %d\n", + trans->transid, atomic_read(&trans->use_count), + atomic_read(&trans->num_writers)); + } + spin_unlock(&fs_info->trans_lock); return 0; } I found there was a orphan transaction after the freeze operation was done. It is because the transaction may not be committed when the transaction handle end even though it is the last handle of the current transaction. This design avoid committing the transaction frequently, but also introduce the above problem. So I add btrfs_attach_transaction() which can catch the current transaction and commit it. If there is no transaction, it will return ENOENT, and do not anything. This function also can be used to instead of btrfs_join_transaction_freeze() because it don't increase the writer counter and don't start a new transaction, so it also can fix the deadlock between sync and freeze. Besides that, it is used to instead of btrfs_join_transaction() in transaction_kthread(), because if there is no transaction, the transaction kthread needn't anything. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
- 04 10月, 2012 3 次提交
-
-
由 Josef Bacik 提交于
We do not need to do anything special to freeze or unfreeze, it's all taken care of by the generic work, and what we currently have is wrong anyway since we shouldn't be returnning to userspace with mutexes held anyway. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
nocow_only is now an obsolete argument. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
-
由 Josef Bacik 提交于
I screwed this up, there is a race between checking if there is a running transaction and actually starting a transaction in sync where we could race with a freezer and get ourselves into trouble. To fix this we need to make a new join type to only do the try lock on the freeze stuff. If it fails we'll return EPERM and just return from sync. This fixes a hang Liu Bo reported when running xfstest 68 in a loop. Thanks, Reported-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 02 10月, 2012 2 次提交
-
-
由 Miao Xie 提交于
Though we dump the stack information when aborting a unused transaction handle, we don't know the correct place where we decide to abort the transaction handle if one function has several place where the transaction abort function is invoked and jumps to the same place after this call. And beside that we also don't know the reason why we jump to abort the current handle. So I modify the transaction abort function and make it output the function name, line and error information. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
由 Miao Xie 提交于
The ordered extent allocation is in the fast path of the IO, so use a slab to improve the speed of the allocation. "Size of the struct is 280, so this will fall into the size-512 bucket, giving 8 objects per page, while own slab will pack 14 objects into a page. Another benefit I see is to check for leaked objects when the module is removed (and the cache destroy takes place)." -- David Sterba Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
-
- 29 8月, 2012 2 次提交
-
-
由 Josef Bacik 提交于
We can deadlock with freeze right now because we unconditionally start a transaction in our ->sync_fs() call. To fix this just check and see if we have a running transaction to commit. This saves us from the deadlock because at this point we'll have the umount sem for the sb so we're safe from freezes coming in after we've done our check. With this patch the freeze xfstests no longer deadlocks. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
If you do the following mkfs.btrfs /dev/sdb /dev/sdc rmmod btrfs dd if=/dev/zero of=/dev/sdb bs=1M count=1 mount -o degraded /dev/sdc /mnt/btrfs-test the box will panic trying to deref the name for the missing dev since it is the lower numbered devid. So fix show_devname to not use missing devices. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 04 8月, 2012 1 次提交
-
-
由 Artem Bityutskiy 提交于
The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from btrfs. Cc: Chris Mason <chris.mason@fusionio.com> Cc: linux-btrfs@vger.kernel.org Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 7月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Use the generic printk_get_level() to search a message for a kern_level. Add __printf to verify format and arguments. Fix a few messages that had mismatches in format and arguments. Add #ifdef CONFIG_PRINTK blocks to shrink the object size a bit when not using printk. [akpm@linux-foundation.org: whitespace tweak] Signed-off-by: NJoe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2012 1 次提交
-
-
由 Mitch Harder 提交于
In support of the recently added capability to remount with lzo compression, provide a helper function to check the compression INCOMPAT flags when remounting with lzo compression, and set the flags if necessary. Also, implement the new helper function when defragmenting with explicit lzo compression and when setting the default subvolume. Signed-off-by: NMitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 24 7月, 2012 2 次提交
-
-
由 Josef Bacik 提交于
This will be used in conjunction with btrfs device ready <dev>. This is needed for initrd's to have a nice and lightweight way to tell if all of the devices needed for a file system are in the cache currently. This keeps them from having to do mount+sleep loops waiting for devices to show up. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Arnd Hannemann 提交于
Btrfs allows to turn on compression on a mounted and used filesystem by issuing mount -o remount,compress=lzo. This patch allows to turn compression off again while the filesystem is mounted. As suggested by David Sterba if the compress-force option was set, it is implicitly cleared if compression is turned off. Tested-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NArnd Hannemann <arnd@arndnet.de>
-