Fix various checkpatch complaints to clean up the code and
make it easier to read.

CHECK: Do not include the paragraph about writing to the FSF
CHECK: Alignment should match open parenthesis
CHECK: Logical continuations should be on the previous line
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Please use a blank line after function/struct/union/enum
       declarations
CHECK: spaces preferred around that '+' (ctx:VxV)
WARNING: Missing a blank line after declarations

No functional change.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Using array size defines makes it much easier to find errors
in index values and loop counts.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Using the BIT macro makes the code a little easier to read and has the
added benefit of making checkpatch happy.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

IT8620E supports three additional voltage sensors.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Voltage registers are non-sequential. Use a register array instead
of a macro to map sensor index to register to simplify the code
and to make it easier to add additional voltage sensors.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add support for the additional temperature sensors on IT8620E.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Convert to use devm_hwmon_device_register_with_groups to simplify
code and reduce code size. This also attaches sysfs attributes
to the hwmon device and no longer to the platform device.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Use is_visible to determine if attributes should be generated or not.
This simplifies the code and reduces object size by about 120 bytes
on x86_64.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify code and reduce object size by about 250 bytes on x86_64.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify code and reduce object size by almost 500 bytes on x86_64.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify code and reduce object size by more than 200 bytes on x86_64.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify code and reduce object size by more than 300 bytes on x86_64.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Cleanup only, no functional change.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The Super-IO chip can also reside at SIO address 0x4e, and there can be
two Super-IO chips in the system. Add support for it.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This will let us support more than one chip on different SIO addresses
with the same driver.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Using the same varible name for function names and as static
variable invites misuse and prevents us from adding support
for a second chip. Rename pdev to it87_pdev and limit its use
to where it is needed.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Return directly on errors if there is no cleanup necessary.
Don't create an error message on memory allocation errors.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Recent chips have a separate register to select the pwm2 frequency.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

IT8620E supports up to 6 pwm channels. Add support for it.
Also check if fan tachometers 4..6 are enabled before instantiating
the respective sysfs attributes.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

AVCC3 is supported on IT8620E, similar to IT8603E. Add feature flag
to indicate AVCC3 support. Don't enable it for now on IT8620E since
it is unclear if this chip supports it correctly.
Tested-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds a platform check function to make code more readable.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds the description to explain the TDP reporting mechanism
and accumulated power algorithm.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch introduces an algorithm that computes the average power by
reading a delta value of “core power accumulator” register during
measurement interval, and then dividing delta value by the length of
the time interval.

User is able to use power1_average entry to measure the processor power
consumption and power1_average_interval entry to set the interval.

A simple example:

ray@hr-ub:~/tip$ sensors
fam15h_power-pci-00c4
Adapter: PCI adapter
power1:       19.58 mW (avg =   2.55 mW, interval =   0.01 s)
                       (crit =  15.00 W)

...

The result is current average processor power consumption in 10
millisecond. The unit of the result is uWatt.
Suggested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

PTSC is the performance timestamp counter value in a cpu core and the
cores in one compute unit have the fixed frequency. So it picks up the
performance timestamp counter value of the first core per compute unit
to measure the interval for average power per compute unit.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds a member in fam15h_power_data which specifies the
compute unit accumulated power. It adds do_read_registers_on_cu to do
all the read to all MSRs and run it on one of the online cores on each
compute unit with smp_call_function_many(). This behavior can decrease
IPI numbers.
Suggested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds CONFIG_CPU_SUP_AMD as the dependence of fam15h_power
driver. Because the following patch will use the interface from
x86/kernel/cpu/amd.c.

Otherwise, the below error might be encountered:

All errors (new ones prefixed by >>):

   drivers/built-in.o: In function `fam15h_power_probe':
>> fam15h_power.c:(.text+0x26e3a3): undefined reference to
>> `amd_get_cores_per_cu'
   fam15h_power.c:(.text+0x26e41e): undefined reference to
`amd_get_cores_per_cu'
Reported-by: Nbuild test robot <lkp@intel.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI
temperature sensors / thermostats.

Includes:
    - ACPI support;
    - raw temperature readings;
    - power management

Datasheet:
https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdfSigned-off-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

On ads7828 the internal reference defaults to off upon power up. When
using internal reference, it needs to be turned on and the voltage needs
to settle before normal conversion cycle can be started. Hence perform a
dummy read in the probe to enable the internal reference allowing the
voltage to settle before performing a normal read.

Without this fix, the first read from the ADC when using internal
reference always returns incorrect data.
Signed-off-by: NAkshay Bhat <akshay.bhat@timesys.com>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Pull perf fixes from Ingo Molnar:
 "Misc kernel side fixes:

   - fix event leak
   - fix AMD PMU driver bug
   - fix core event handling bug
   - fix build bug on certain randconfigs

  Plus misc tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/ibs: Fix pmu::stop() nesting
  perf/core: Don't leak event in the syscall error path
  perf/core: Fix time tracking bug with multiplexing
  perf jit: genelf makes assumptions about endian
  perf hists: Fix determination of a callchain node's childlessness
  perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples
  perf tools: Fix build break on powerpc
  perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL
  perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers
  perf tests: Fix tarpkg build test error output redirection

Pull core kernel fixes from Ingo Molnar:
 "This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness
  you noted during the original nohz pull request, plus there's also
  misc fixes:

   - fix liblockdep build bug
   - fix uapi header build bug
   - print more lockdep hash collision info to help debug recent reports
     of hash collisions
   - update MAINTAINERS email address"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Update my email address
  locking/lockdep: Print chain_key collision information
  uapi/linux/stddef.h: Provide __always_inline to userspace headers
  tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh
  locking/atomic, sched: Unexport fetch_or()
  timers/nohz: Convert tick dependency mask to atomic_t
  locking/atomic: Introduce atomic_fetch_or()

Commit 840f5b05 ("media: au0828 disable tuner to demod link in
au0828_media_device_register()") removed all uses of the 'dtv_demod',
but left the variable itself around.

Remove it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "This lot contains:

   - Some fixups for the fallout of the topology consolidation which
     unearthed AMD/Intel inconsistencies
   - Documentation for the x86 topology management
   - Support for AMD advanced power management bits
   - Two simple cleanups removing duplicated code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add advanced power management bits
  x86/thread_info: Merge two !__ASSEMBLY__ sections
  x86/cpufreq: Remove duplicated TDP MSR macro definitions
  x86/Documentation: Start documenting x86 topology
  x86/cpu: Get rid of compute_unit_id
  perf/x86/amd: Cleanup Fam10h NB event constraints
  x86/topology: Fix AMD core count

Pull remoteproc fix from Bjorn Andersson:
 "Fix incorrect error check in the ST remoteproc driver and advertise
  the newly created linux-remoteproc mailing list"

* tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc:
  MAINTAINERS: Add mailing list for remote processor subsystems
  remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value

Pull SCSI target fixes from Nicholas Bellinger:
 "This includes fixes from HCH for -rc1 configfs default_groups
  conversion changes that ended up breaking some iscsi-target
  default_groups, along with Sagi's ib_drain_qp() conversion for
  iser-target to use the common caller now available to RDMA kernel
  consumers in v4.6+ code"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: add a new add_wwn_groups fabrics method
  target: initialize the nacl base CIT begfore init_nodeacl
  target: remove ->fabric_cleanup_nodeacl
  iser-target: Use ib_drain_qp

Commit d4edcf0d ("mm/gup: Switch all callers of get_user_pages() to
not pass tsk/mm") switched get_user_pages() callers to the simpler model
where they no longer pass in the thread and mm pointer.  But since then
we've merged changes to a few drivers that re-introduce use of the old
interface.  Let's fix them up.

They continued to work fine (thanks to the truly disgusting macros
introduced in commit cde70140: "mm/gup: Overload get_user_pages()
functions"), but cause unnecessary build noise.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull configfs fix from Christoph Hellwig:
 "A trivial fix to the recently introduced binary attribute helper
  macros"

* tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs:
  configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions

Pull networking fixes from David Miller:

 1) Missing device reference in IPSEC input path results in crashes
    during device unregistration.  From Subash Abhinov Kasiviswanathan.

 2) Per-queue ISR register writes not being done properly in macb
    driver, from Cyrille Pitchen.

 3) Stats accounting bugs in bcmgenet, from Patri Gynther.

 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
    Quentin Armitage.

 5) SXGBE driver has off-by-one in probe error paths, from Rasmus
    Villemoes.

 6) Fix race in save/swap/delete options in netfilter ipset, from
    Vishwanath Pai.

 7) Ageing time of bridge not set properly when not operating over a
    switchdev device.  Fix from Haishuang Yan.

 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
    Duyck.

 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.

10) FEC driver should only access registers that actually exist on the
    given chipset, fix from Fabio Estevam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  net: mvneta: fix changing MTU when using per-cpu processing
  stmmac: fix MDIO settings
  Revert "stmmac: Fix 'eth0: No PHY found' regression"
  stmmac: fix TX normal DESC
  net: mvneta: use cache_line_size() to get cacheline size
  net: mvpp2: use cache_line_size() to get cacheline size
  net: mvpp2: fix maybe-uninitialized warning
  tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
  net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
  rtnl: fix msg size calculation in if_nlmsg_size()
  fec: Do not access unexisting register in Coldfire
  net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
  net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
  net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
  net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
  bpf: make padding in bpf_tunnel_key explicit
  ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
  bnxt_en: Fix ethtool -a reporting.
  bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
  bnxt_en: Implement proper firmware message padding.
  ...

Pull clk fixes from Stephen Boyd:
 "A handful of const updates for reset ops and a couple fixes to the
  newly introduced IPQ4019 clock driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll
  clk: qcom: ipq4019: switch remaining defines to enums
  clk: qcom: Make reset_control_ops const
  clk: tegra: Make reset_control_ops const
  clk: sunxi: Make reset_control_ops const
  clk: atlas7: Make reset_control_ops const
  clk: rockchip: Make reset_control_ops const
  clk: mmp: Make reset_control_ops const
  clk: mediatek: Make reset_control_ops const