[ Upstream commit b805d78d300bcf2c83d6df7da0c818b0fee41427 ]

UBSAN report this:

UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24
index 6 is out of range for type 'unsigned int [6]'
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4
 0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80
 ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8
Call Trace:
 <IRQ>  [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline]
 <IRQ>  [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
 [<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164
 [<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382
 [<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289
 [<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309
 [<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243
 [<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144
 [<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline]
 [<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401
 [<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273
 [<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline]
 [<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
 [<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
 [<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
 [<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735
 <EOI>  [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52
 [<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline]
 [<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446
 [<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437
 [<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92
 [<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline]
 [<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline]
 [<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299
 [<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245

The issue is triggered as this:

xfrm_add_policy
    -->verify_newpolicy_info  //check the index provided by user with XFRM_POLICY_MAX
			      //In my case, the index is 0x6E6BB6, so it pass the check.
    -->xfrm_policy_construct  //copy the user's policy and set xfrm_policy_timer
    -->xfrm_policy_insert
	--> __xfrm_policy_link //use the orgin dir, in my case is 2
	--> xfrm_gen_index   //generate policy index, there is 0x6E6BB6

then xfrm_policy_timer be fired

xfrm_policy_timer
   --> xfrm_policy_id2dir  //get dir from (policy index & 7), in my case is 6
   --> xfrm_policy_delete
      --> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access

Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is
valid, to fix the issue.
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: e682adf0 ("xfrm: Try to honor policy index if it's supplied by user")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit bbd84f33652f852ce5992d65db4d020aba21f882 upstream.

Starting from commit 9c225f26 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client.  See commit 10dce8af3422 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2 ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.

To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

so if we would do such a change it will break a real user.

Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.

This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.

Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: NKirill Smelkov <kirr@nexedi.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 940bc471780b004a5277c1931f52af363c2fc9da upstream.

Commit b592211c ("dm mpath: fix attached_handler_name leak and
dangling hw_handler_name pointer") fixed a memory leak for the case
where setup_scsi_dh() returns failure. But setup_scsi_dh may return
success and not "use" attached_handler_name if the
retain_attached_hwhandler flag is not set on the map. As setup_scsi_sh
properly "steals" the pointer by nullifying it, freeing it
unconditionally in parse_path() is safe.

Fixes: b592211c ("dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer")
Cc: stable@vger.kernel.org
Reported-by: NYufen Yu <yuyufen@huawei.com>
Signed-off-by: NMartin Wilck <mwilck@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 30bba430ddf737978e40561198693ba91386dac1 upstream.

When we use separate devices for data and metadata, dm-integrity would
incorrectly calculate the size of the metadata device as if it had
512-byte block size - and it would refuse activation with larger block
size and smaller metadata device.

Fix this so that it takes actual block size into account, which fixes
the following reported issue:
https://gitlab.com/cryptsetup/cryptsetup/issues/450

Fixes: 356d9d52 ("dm integrity: allow separate metadata device")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 81bc6d150ace6250503b825d9d0c10f7bbd24095 upstream.

When the target line contains an invalid device, delay_ctr() will call
delay_dtr() with NULL workqueue.  Attempting to destroy the NULL
workqueue causes a crash.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7aedf75ff740a98f3683439449cd91c8662d03b2 upstream.

The function blkdev_report_zones() returns success even if no zone
information is reported (empty report). Empty zone reports can only
happen if the report start sector passed exceeds the device capacity.
The conditions for this to happen are either a bug in the caller code,
or, a change in the device that forced the low level driver to change
the device capacity to a value that is lower than the report start
sector. This situation includes a failed disk revalidation resulting in
the disk capacity being changed to 0.

If this change happens while dm-zoned is in its initialization phase
executing dmz_init_zones(), this function may enter an infinite loop
and hang the system. To avoid this, add a check to disallow empty zone
reports and bail out early. Also fix the function dmz_update_zone() to
make sure that the report for the requested zone was correctly obtained.

Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NShaun Tancheff <shaun@tancheff.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e28adc3bf34e434b30e8d063df4823ba0f3e0529 upstream.

Add missing dm_bitset_cursor_next() to properly advance the bitset
cursor.

Otherwise, the discarded state of all blocks is set according to the
discarded state of the first block.

Fixes: ae4a46a1 ("dm cache metadata: use bitset cursor api to load discard bitset")
Cc: stable@vger.kernel.org
Signed-off-by: NNikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream.

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.
Signed-off-by: NStefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86fa6a344209d9414ea962b1f1ac6ade9dd7563a upstream.

Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk.  No
functional change intended.
Signed-off-by: NStefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be20bbcb0a8cb5597cc62b3e28d275919f3431df upstream.

Reestablish the PCIe link very early in the resume process in case it
went down to prevent PCI accesses from hanging the bus. Such accesses
can happen early in the PCI resume process, as early as the
SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the
driver resume_noirq() callback.

Fixes: e015f88c ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: NKazufumi Ikeda <kaz-ikeda@xc.jp.nec.com>
Signed-off-by: NGaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
[lorenzo.pieralisi@arm.com: reformatted commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 31f996efbd5a7825f4d30150469e9d110aea00e8 upstream.

Commit 60ed982a ("PCI/AER: Move internal declarations to
drivers/pci/pci.h") changed pci_aer_init() to return "void", but didn't
change the stub for when CONFIG_PCIEAER isn't enabled.  Change the stub to
match.

Fixes: 60ed982a ("PCI/AER: Move internal declarations to drivers/pci/pci.h")
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.19+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6302bf3ef78dd210b5ff4a922afcb7d8eff8a211 upstream.

Two functions allocate a host bridge: devm_pci_alloc_host_bridge() and
pci_alloc_host_bridge().  At the moment, only the unmanaged one initializes
the PCIe feature bits, which prevents from using features such as hotplug
or AER on some systems, when booting with device tree.  Make the
initialization code common.

Fixes: 02bfeb48 ("PCI/portdrv: Simplify PCIe feature permission checking")
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.17+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream.

When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot.  Add a quirk to
avoid bus resets on this device.

Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.comSigned-off-by: NJames Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.14+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d28ca864c493637f3c957f4ed9348a94fca6de60 upstream.

ATS is broken on the Radeon R7 GPU (at least for Stoney Ridge based laptop)
and causes IOMMU stalls and system failure.  Disable ATS on these devices
to make them usable again with IOMMU enabled.

Thanks to Joerg Roedel <jroedel@suse.de> for help.

[bhelgaas: In the email thread mentioned below, Alex suspects the real
problem is in sbios or iommu, so it may affect only certain systems, and it
may affect other devices in those systems as well.  However, per Joerg we
lack the ability to debug further, so this quirk is the best we can do for
now.]

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194521
Link: https://lore.kernel.org/lkml/20190408103725.30426-1-nickel@altlinux.org
Fixes: 9b44b0b0 ("PCI: Mark AMD Stoney GPU ATS as broken")
Signed-off-by: NNikolai Kostrigin <nickel@altlinux.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f627caf55b8e735dcec8fa6538e9668632b55276 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display
or starting the X server will crash and freeze the system, or garble the
display.

Experiments showed this problem can mostly be solved by adjusting the
order of register writes. Also, sm712fb failed to consider the difference
of clock frequency when unblanking the display, and programs the clock for
SM712 to SM720.

Fix them by adjusting the order of register writes, and adding an
additional check for SM720 for programming the clock frequency.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4ed7d2ccb7684510ec5f7a8f7ef534bc6a3d55b2 upstream.

Loongson MIPS netbooks use 1024x600 LCD panels, which is the original
target platform of this driver, but nearly all old x86 laptops have
1024x768. Lighting 768 panels using 600's timings would partially
garble the display. Since it's not possible to distinguish them reliably,
we change the default to 768, but keep 600 as-is on MIPS.

Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD
panel, this driver would probably garbled those display. As we don't
have one for testing, the original behavior of the driver is kept as-is,
but the problem has been documented is the comments.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6053d3a4793e5bde6299ac5388e76a3bf679ff65 upstream.

In order to support the 1024x600 panel on Yeeloong Loongson MIPS
laptop, the original 1024x768-16 table was modified to 1024x600-16,
without leaving the original. It causes problem on x86 laptop as
the 1024x768-16 support was still claimed but not working.

Fix it by introducing the 1024x768-16 mode.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e0e59993df0601cddb95c4f6c61aa3d5e753c00 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X
will crash the machine instantly, because the VRAM/framebuffer is not
mapped correctly.

On SM712, the framebuffer starts at the beginning of address space, but
SM720's framebuffer starts at the 1 MiB offset from the beginning. However,
sm712fb fails to take this into account, as a result, writing to the
framebuffer will destroy all the registers and kill the system immediately.
Another problem is the driver assumes 8 MiB of VRAM for SM720, but some
SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM.

Fix this problem by removing the hardcoded VRAM size, adding a function to
query the amount of VRAM from register MCR76 on SM720, and adding proper
framebuffer offset.

Please note that the memory map may have additional problems on Big-Endian
system, which is not available for testing by myself. But I highly suspect
that the original code is also broken on Big-Endian machines for SM720, so
at least we are not making the problem worse. More, the driver also assumed
SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used
in earlier laptops, such as IBM Thinkpad 240X, the driver would probably
crash on them. I've never seen one of those machines and cannot fix it, but
I have documented these problems in the comments.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec1587d5073f29820e358f3a383850d61601d981 upstream.

When the machine is booted in VGA mode, loading sm712fb would cause
a glitch of random pixels shown on the screen. To prevent it from
happening, we first clear the entire framebuffer, and we also need
to stop calling smtcfb_setmode() during initialization, the fbdev
layer will call it for us later when it's ready.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8069053880e0ee3a75fd6d7e0a30293265fe3de4 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause a white screen of death on
the next POST, presumably the proper timings for the LCD panel was
not reprogrammed properly by the BIOS.

Experiments showed a few CRTC Scratch Registers, including CRT3D,
CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
a hardware testing register, we shouldn't mess with it. CRT3C has
blanking signal and line compare control, which is not needed for this
driver.

Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
registers don't have side-effect on other systems, writing to them is
also highly questionable.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf9070595e100942c539e229dde4770aaeaa4e9 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.

Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.

Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.

Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.

Stop writing to the SR30 (a.k.a FPR30) register.
Signed-off-by: NYifeng Li <tomli@tomli.me>
Tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f8585539df0a1527c78b5d760665c89fe1c105a9 upstream.

The following commit:

  38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")

updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.

As reported by James, this breaks some x86 systems:

  [ 1.173368] efifb: probing for efifb
  [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
  [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
  [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5

The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.

So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.
Reported-by: NJames Hilliard <james.hilliard1@gmail.com>
Tested-by: NJames Hilliard <james.hilliard1@gmail.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.

Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.

  $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
         HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
  ...
    AR       /out/tools/objtool/libsubcmd.a
  /bin/sh: 1: ar: not found
  ...

Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b1f01b653b408ebe58fec78c566d1075d285c64 upstream.

arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event':
arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable]
  struct perf_event *event = container_of(evt, struct perf_event, hw);
                     ^~~~~

Fix this by making use of IS_ENABLED() to simplify the code and avoid
unnecessary ifdefery.

Fixes: 84002c88 ("MIPS: perf: Fix perf with MT counting other threads")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b6599a9d8e6c9f7e9b0476012383b1777f7fc93 upstream.

The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.

Note that commit 3f04d98e ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61b6e08dc8e3ea80b7485c9b3f875ddd45c8466b upstream.

The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.

The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.

In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.

That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.

To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.

Note that commit 3f04d98e ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-3-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7ba8fa20e26eb3c0c04d747f7fd2223694eac4d5 upstream.

The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.

Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.

Example:

 Before:

 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         10 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          8 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          6 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          4 instructions:u:      7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16423 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222734:      12731 instructions:u:      7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...

 After:
 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16479 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f4aa0819 ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/20190510124143.27054-2-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b906c056b6023c390f18347169071193fda57dde upstream.

Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.

When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include <stdio.h>
  #include <stdint.h>

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <unistd.h>

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com

Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aee ("ftrace: provide an id file for each event")
Signed-off-by: NElazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e298e8604088a600d8100a111a532a9d342af09 upstream.

Nicolai Stange discovered[1] that if live kernel patching is enabled, and the
function tracer started tracing the same function that was patched, the
conversion of the fentry call site during the translation of going from
calling the live kernel patch trampoline to the iterator trampoline, would
have as slight window where it didn't call anything.

As live kernel patching depends on ftrace to always call its code (to
prevent the function being traced from being called, as it will redirect
it). This small window would allow the old buggy function to be called, and
this can cause undesirable results.

Nicolai submitted new patches[2] but these were controversial. As this is
similar to the static call emulation issues that came up a while ago[3].
But after some debate[4][5] adding a gap in the stack when entering the
breakpoint handler allows for pushing the return address onto the stack to
easily emulate a call.

[1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de
[2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de
[3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com
[4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com
[5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com

[
  Live kernel patching is not implemented on x86_32, thus the emulate
  calls are only for x86_64.
]

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Changed to only implement emulated calls for x86_64 ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4b33dadf37666c0860b88f9e52a16d07bf6d0b03 upstream.

In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.

These helper functions are added:

  int3_emulate_jmp(): changes the location of the regs->ip to return there.

 (The next two are only for x86_64)
  int3_emulate_push(): to push the address onto the gap in the stack
  int3_emulate_call(): push the return address and change regs->ip

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2700fefdb2d9751c416ad56897e27d41e409324a upstream.

To allow an int3 handler to emulate a call instruction, it must be able to
push a return address onto the stack. Add a gap to the stack to allow the
int3 handler to push the return address and change the return from int3 to
jump straight to the emulated called function target.

Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble
Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net

[
  Note, this is needed to allow Live Kernel Patching to not miss calling a
  patched function when tracing is enabled. -- Steven Rostedt
]

Cc: stable@vger.kernel.org
Fixes: b700e7f0 ("livepatch: kernel: add support for live patching")
Tested-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NNicolai Stange <nstange@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream.

xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.

Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/39571Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.

Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.

In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3428030da004a1128cbdcf93dc03e16f184d845b upstream.

Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.

The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion.  File may be open O_RDONLY, but ioctl modifies the
file.  VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does.  So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.

Fixes: dab5ca8f ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream.

fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.

This adds the necessary inode_newsize_ok() check.
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Fixes: 05ba1f08 ("fuse: add FALLOCATE operation")
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream.

Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.

Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: NAntonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782 ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit babc250e278eac7b0e671bdaedf833759b43bb78 upstream.

Rendering calls may be done simultaneously from the workqueue,
dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io.
The code is robust enough so that it won't crash on concurrent rendering.

However, concurrent rendering may cause display corruption if the same
pixel is simultaneously being rendered. In order to avoid this corruption,
this patch adds a mutex around the rendering calls.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
[b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b11f9d8433b471fdd3ebed232b43a4b723be6ff upstream.

If a framebuffer device is used as a console, the rendering calls
(copyarea, fillrect, imageblit) may be done with the console spinlock
held. On udlfb, these function call dlfb_handle_damage that takes a
blocking semaphore before acquiring an URB.

In order to fix the bug, this patch changes the calls copyarea, fillrect
and imageblit to offload USB work to a workqueue.

A side effect of this patch is 3x improvement in console scrolling speed
because the device doesn't have to be updated after each copyarea call.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>