- 01 8月, 2014 4 次提交
-
-
由 Chuck Lever 提交于
Clean ups: - make it obvious that the rl_mw field is a pointer -- allocated separately, not as part of struct rpcrdma_mr_seg - promote "struct {} frmr;" to a named type - promote the state enum to a named type - name the MW state field the same way other fields in rpcrdma_mw are named Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Tested-by: NShirley Ma <shirley.ma@oracle.com> Tested-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Various reports of: rpcrdma_qp_async_error_upcall: QP error 3 on device mlx4_0 ep ffff8800bfd3e848 Ensure that rkeys in already-marshalled RPC/RDMA headers are refreshed after the QP has been replaced by a reconnect. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=249Suggested-by: NSelvin Xavier <Selvin.Xavier@Emulex.Com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Tested-by: NShirley Ma <shirley.ma@oracle.com> Tested-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
When the client uses physical memory registration, each page in the payload gets its own array entry in the RPC/RDMA header's chunk list. Therefore, don't advertise a maximum payload size that would require more array entries than can fit in the RPC buffer where RPC/RDMA headers are built. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Tested-by: NShirley Ma <shirley.ma@oracle.com> Tested-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Ensure ia->ri_id remains valid while invoking dma_unmap_page() or posting LOCAL_INV during a transport reconnect. Otherwise, ia->ri_id->device or ia->ri_id->qp is NULL, which triggers a panic. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=259 Fixes: ec62f40d 'xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting' Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Tested-by: NShirley Ma <shirley.ma@oracle.com> Tested-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 04 6月, 2014 9 次提交
-
-
由 Chuck Lever 提交于
Update the cwnd while processing the server's reply. Otherwise the next task on the xprt_sending queue is still subject to the old credit window. Currently, no task is awoken if the old congestion window is still exceeded, even if the new window is larger, and a deadlock results. This is an issue during a transport reconnect. Servers don't normally shrink the credit window, but the client does reset it to 1 when reconnecting so the server can safely grow it again. As a minor optimization, remove the hack of grabbing the initial cwnd size (which happens to be RPC_CWNDSCALE) and using that value as the congestion scaling factor. The scaling value is invariant, and we are better off without the multiplication operation. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Sagi Grimberg <sagig@dev.mellanox.co.il> points out that a steady stream of CQ events could starve other work because of the boundless loop pooling in rpcrdma_{send,recv}_poll(). Instead of a (potentially infinite) while loop, return after collecting a budgeted number of completions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Acked-by: NSagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Change the completion handlers to grab up to 16 items per ib_poll_cq() call. No extra ib_poll_cq() is needed if fewer than 16 items are returned. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
The current CQ handler uses the ib_wc.opcode field to distinguish between event types. However, the contents of that field are not reliable if the completion status is not IB_WC_SUCCESS. When an error completion occurs on a send event, the CQ handler schedules a tasklet with something that is not a struct rpcrdma_rep. This is never correct behavior, and sometimes it results in a panic. To resolve this issue, split the completion queue into a send CQ and a receive CQ. The send CQ handler now handles only struct rpcrdma_mw wr_id's, and the receive CQ handler now handles only struct rpcrdma_rep wr_id's. Fix suggested by Shirley Ma <shirley.ma@oracle.com> Reported-by: NRafael Reiter <rafael.reiter@ims.co.at> Fixes: 5c635e09 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=73211Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NKlemens Senn <klemens.senn@ims.co.at> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up: rpcrdma_ep_destroy() returns a value that is used only to print a debugging message. rpcrdma_ep_destroy() already prints debugging messages in all error cases. Make rpcrdma_ep_destroy() return void instead. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up: All remaining callers of rpcrdma_deregister_external() pass NULL as the last argument, so remove that argument. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were intended as stop-gap modes before the introduction of FRMR. They are now considered obsolete. MEMWINDOWS_ASYNC is also considered unsafe because it can leave client memory registered and exposed for an indeterminant time after each I/O. At this point, the MEMWINDOWS modes add needless complexity, so remove them. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
An IB provider can invoke rpcrdma_conn_func() in an IRQ context, thus rpcrdma_conn_func() cannot be allowed to directly invoke generic RPC functions like xprt_wake_pending_tasks(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Steve Wise 提交于
Some rdma devices don't support a fast register page list depth of at least RPCRDMA_MAX_DATA_SEGS. So xprtrdma needs to chunk its fast register regions according to the minimum of the device max supported depth or RPCRDMA_MAX_DATA_SEGS. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 01 2月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
tk_xprt is just a shortcut for tk_client->cl_xprt, however cl_xprt is defined as an __rcu variable. Replace dereferences of tk_xprt with non-rcu dereferences where it is safe to do so. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 2月, 2012 1 次提交
-
-
由 Tom Tucker 提交于
The svcrdma transport was un-marshalling requests in-place. This resulted in sparse warnings due to __beXX data containing both NBO and HBO data. The code has been restructured to do byte-swapping as the header is parsed instead of when the header is validated immediately after receipt. Also moved extern declarations for the workqueue and memory pools to the private header file. Signed-off-by: NTom Tucker <tom@ogc.us> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2011 1 次提交
-
-
由 Steve Dickson 提交于
Our performance team has noticed that increasing RPCRDMA_MAX_DATA_SEGS from 8 to 64 significantly increases throughput when using the RDMA transport. Signed-off-by: NSteve Dickson <steved@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 3月, 2011 1 次提交
-
-
由 Tom Tucker 提交于
When the rpc_memreg_strategy is 5, FRMR are used to map RPC data. This mode uses an FRMR to map the RPC data, then invalidates (i.e. unregisers) the data in xprt_rdma_free. These FRMR are used across connections on the same mount, i.e. if the connection goes away on an idle timeout and reconnects later, the FRMR are not destroyed and recreated. This creates a problem for transport errors because the WR that invalidate an FRMR may be flushed (i.e. fail) leaving the FRMR valid. When the FRMR is later used to map an RPC it will fail, tearing down the transport and starting over. Over time, more and more of the FRMR pool end up in the wrong state resulting in seemingly random disconnects. This fix keeps track of the FRMR state explicitly by setting it's state based on the successful completion of a reg/inv WR. If the FRMR is ever used and found to be in the wrong state, an invalidate WR is prepended, re-syncing the FRMR state and avoiding the connection loss. Signed-off-by: NTom Tucker <tom@ogc.us> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 10月, 2008 4 次提交
-
-
由 Tom Talpey 提交于
Add defensive timeouts to wait_for_completion() calls in RDMA address resolution, and make them interruptible. Fix the timeout units to milliseconds (formerly jiffies) and move to private header. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Tom Talpey 提交于
The RPC/RDMA protocol allows clients and servers to avoid RDMA operations for data which is purely the result of XDR padding. On the client, automatically insert the necessary padding for such server replies, and optionally don't marshal such chunks. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Tom Talpey 提交于
An RPC/RDMA client cannot retransmit on an unbroken connection, doing so violates its flow control with the server. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Tom Talpey 提交于
Internal RPC/RDMA structure updates in preparation for FRMR support. Signed-off-by: NTom Talpey <talpey@netapp.com> Acked-by: NTom Tucker <tom@opengridcomputing.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 10月, 2007 1 次提交
-
-
由 \"Talpey, Thomas\ 提交于
This implements the configuration and building of the core transport switch implementation of the rpcrdma transport. Stubs are provided for the rpcrdma protocol handling, and the infiniband/iwarp verbs interface. These are provided in following patches. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-