The "diverse" Quanta ID 0x0763 is overridden to ALC268_ACER.
This keeps headphone automute and microphone input from operating
on at least one laptop from Opti Systems.
Without the override, the BIOS parser does a fine job setting the
card up and everything works.
Tested-By: NPeter Schneider <e.at.chi.kaen@googlemail.com>
Signed-off-by: NTony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reporter, who is running kernel 2.6.38, reports that
he needs to set model=auto for the headphone output to work
correctly.

BugLink: http://bugs.launchpad.net/bugs/761022
Cc: stable@kernel.org (v2.6.38+)
Reported-by: Jo
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The auto-mute setup for Acer Aspire-one with ALC268 was set wrongly
during the clean-up of auto-mute function.  Fixed now.
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Reatlek model quirks use master_mute bool switch for controlling
the master-mute of outputs.  For these cases, the initialization of HP
pins/amps were forgotten during the transition to the common automute
helper function in 3.0 development time, and resulted in the muted HP
output as default.

This patch fixes the issue by adjusting the HP output explicitly with
master_mute switch.
Tested-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The tag number was forgotten to be fixed after cleaning up the model
quirks for ALC262 fujitsu and lenovo-3000 models.
Tested-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/792712

The original reporter states that sound from the internal speakers is
inaudible until using the model=auto quirk. This symptom is due to an
existing quirk mask for 0x102802b* that uses the model=dell quirk. To
limit the possible regressions, leave the existing quirk mask but add
a higher priority specific mask for the reporter's PCI SSID.

Reported-and-tested-by: rodni hipp
Cc: <stable@kernel.org> [2.6.38+]
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Afer commit aa202455 , none of realtek
codec has hardware volume control "PCM Playback Volume" and
"PCM Playback Switch".

As Virtual Master require all slave controls must have same number of step
and dB range.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This fixes the input layer beep not working on some EeePC 1000 models by
adding the subsystem id into whitelist. Otherwise the corresponding ALSA
mixer is not enabled and stays muted, resulting in no console beep.
Signed-off-by: NMadis Janson <madis@cyber.ee>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change power control register to default.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Compatible with ALC269.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are compatible with ALC882 codec.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In addition to the normal mic jack, the mic (or line-in) jack on the
docking-station is checked also as a candidate for auto-selection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also replace more open-codes with this function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

spec->automute_lines shouldn't be set unless the line-detection is
available.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replaced the open-code with the new helper function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix NULL-dereference when try to use alt_playback since those codecs
which support multistreaming playback usually have more than 1 adc but
the driver should create alt_capture when spec->stream_analog_alt_capture
is also defined.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The check of chained fixup list entry was done against the wrong element.
A stupid mistake during refactoring.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also fixed the assignment of multiout.dac_nids to satisfy const.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit c6b35874.

It turned out that there are different pin configurations for this
PCI SSID, including multi-channel modes.  And more proper fix for
allowing line-out mutes will come up in 2.6.40 tree, so we won't need
this fixup any more there.
Reported-by: NAndrew Clayton <andrew@digital-domain.net>
Reported-by: NEmmanuel Benisty <benisty.e@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCI SSID is 1025:031c and the codec SSID is 1025:031d,
so the driver mistakes this for a SKU value, but looking at
the numbers, this is obviously wrong.

Cc: stable@kernel.org (2.6.38+)
BugLink: http://bugs.launchpad.net/bugs/761861Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

PC Beep was not being reported as enabled on my EeePC 901:
        SKU: enable_pcbeep=0x0
Signed-off-by: NDaniel Cordero <danielcordero@lavabit.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Auto-Mute Mode control is useful even when only two outputs
(e.g. HP and speaker) are available.  Then user can enable/disable
the auto-mute behavior on the fly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only supporting the line-out automute as additional feature
to the existing headphone automute, now the headphone jack can
mute the line-out alone even without the speaker outs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

By popular demands, I add the functionality to mute / unmute the
line-out jacks per the headphone plug / unplug.  For achieving this
and keeping the compatibility with the old behavior, the new mixer
enum "Auto-Mute Mode" is added.  With this, user can control the
auto-mute behavior either disabled, speaker-only or lineout+speaker.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed the redundant codes by replacing with the common helper
functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Yet another consolidation of auto-mute functions for the devices
controlling the output muts together with the master mixer switch,
typically found for ALC262 machines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the common helper function and flags to support the auto-mute
per line-out jack detection, and also the mute of line-out jacks.

A few model-specific implementations are replaced with the common
helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some models do mute on/off the connected mixer widget for the automatic
muting, instead of controlling the pin widget itself.  This patch adds
the implementation of such type of auto-mute in the common helper
function, and reduces the redundant codes for each model preset.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are two entry points for the headphone automute functions for
Realtek, alc_automute_amp() and alc_automute_pin().  These call the
same function in the end, so we can basically consolidate these
with a flag in spec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the support of "Channel Mode" enum control to Realtek
auto-parser.  When line-in or mic-in jacks are capable to output and
free DACs are available, the driver allows to switch to multi-channel
mode via "Channel Mode" enum switch, as already implemented in some
preset cases.

Not implemented in all Realtek codecs.  Currently, ALC880, 882, 861,
662 and the compatible codecs are supported.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow alc662_dac_to_mix() and alc662_look_for_dac() to parse
down the selector widget that is found in ALC880-type codecs,
and rename them to alc_auto_*() accordingly.
This is for the next coming multi-io extensions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Acer laptops with ALC271x needs a magic initialization for digital-mic
to make it working with mono streams (and PulseAudio).
Added a fix-up applied to Acer with ALC271x generically.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since we now set up the connections and mutes dynamically in the
auto-parser, all static initializations via alc662_init_verbs & co are
no longer needed.  Let's drop them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Mute the ADC as default in the auto-parser dynamically instead of relying
on the static init verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of static init array, better to determine the connection and
the mute status of the pin/mixer/DAC route dynamically.  This fixes the
uninitialized mixer 0x0f on ALC892.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In cases where there is only one internal mic connected to ADC 0x11,
alc275_setup_dual_adc won't handle the case, so we need to add the
ADC node to the array of candidates.

Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/752792
Reported-by: Vincenzo Pii
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

alc269_suspend is just calling the shut-up, so we can use the new shutup
callback for the purpose.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>