At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.

Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:

- The on-stack dfops and associated xfs_defer_init() call, as the
  internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
  a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
  transaction cancel.

The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

xfs_itruncate_extents[_flags]() uses a local dfops with a
transaction provided by the caller. It uses hacky ->t_dfops
replacement logic to avoid stomping over an already populated
->t_dfops.

The latter never occurs for current callers and the logic itself is
not really appropriate. Clean this up by updating all callers to
initialize a dfops and to use that down in xfs_itruncate_extents().
This more closely resembles the upcoming logic where dfops will be
embedded within the transaction. We can also replace the
xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an
assert. Both dfops and firstblock should be in a valid state
after xfs_defer_finish() and the inode joined to the dfops is fixed
throughout the loop.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
	echo $f
	cat $f | awk -f hdr.awk > $f.new
	mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
	hdr = 1.0
	tag = "GPL-2.0"
	str = ""
}

/^ \* This program is free software/ {
	hdr = 2.0;
	next
}

/any later version./ {
	tag = "GPL-2.0+"
	next
}

/^ \*\// {
	if (hdr > 0.0) {
		print "// SPDX-License-Identifier: " tag
		print str
		print $0
		str=""
		hdr = 0.0
		next
	}
	print $0
	next
}

/^ \* / {
	if (hdr > 1.0)
		next
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
	next
}

/^ \*/ {
	if (hdr > 0.0)
		next
	print $0
	next
}

// {
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
}

END { }
$
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

DQALLOC is only ever used with xfs_qm_dqget*, and the only flag that the
_dqget family of functions cares about is DQALLOC.  Therefore, change
it to a boolean 'can alloc?' flag for the dqget interfaces where that
makes sense.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

There are two uses of dqget here -- one is to return the dquot for a
given type and id, and the other is to return the dquot for a given type
and inode.  Those are two separate things, so split them into two
smaller functions.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

There's only one caller of DQNEXT and its semantics can be moved into a
separate function, so create the function and get rid of the flag.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The quotaoff operation has a race with inode allocation that results
in a livelock. An inode allocation that occurs before the quota
status flags are updated acquires the appropriate dquots for the
inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode
into the perag radix tree, sometime later attaches the dquots to the
inode and finally clears the XFS_INEW flag. Quotaoff expects to
release the dquots from all inodes in the filesystem via
xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator,
which skips inodes in the XFS_INEW state because they are not fully
constructed. If the scan occurs after dquots have been attached to
an inode, but before XFS_INEW is cleared, the newly allocated inode
will continue to hold a reference to the applicable dquots. When
quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those
dquot(s) remain elevated and the dqpurge scan spins indefinitely.

To address this problem, update the xfs_qm_dqrele_all_inodes() scan
to wait on inodes marked on the XFS_INEW state. We wait on the
inodes explicitly rather than skip and retry to avoid continuous
retry loops due to a parallel inode allocation workload. Since
quotaoff updates the quota state flags and uses a synchronous
transaction before the dqrele scan, and dquots are attached to
inodes after radix tree insertion iff quota is enabled, one INEW
waiting pass through the AG guarantees that the scan has processed
all inodes that could possibly hold dquot references.
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Merge xfs_trans_reserve and xfs_trans_alloc into a single function call
that returns a transaction with all the required log and block reservations,
and which allows passing transaction flags directly to avoid the cumbersome
_xfs_trans_alloc interface.

While we're at it we also get rid of the transaction type argument that has
been superflous since we stopped supporting the non-CIL logging mode.  The
guts of it will be removed in another patch.

[dchinner: fixed transaction leak in error path in xfs_setattr_nonsize]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Default quotas are globally set due historical reasons. IRIX only
supported user and project quotas, and default quota was only
applied to user quotas.

In Linux, when a default quota is set, all different quota types
inherits the same default value.

An user with a quota limit larger than the default quota value, will
still be limited to the default value because the group quotas also
inherits the default quotas. Unless the group which the user belongs
to have a custom quota limit set.

This patch aims to split the default quota value by quota type.
Allowing each quota type having different default values.

Default time limits are still set globally. XFS does not set a
per-user/group timer, but a single global timer. For changing this
behavior, some changes should be made in user-space tools another
bugs being fixed.
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add code to allow the Q_XGETNEXTQUOTA quotactl to quickly find
all active quotas by examining the quota inode, and skipping
over unallocated or uninitialized regions.

Userspace can then use this interface rather than i.e. a
getpwent() loop when asked to report all active quotas.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The flags argument to xfs_trans_commit is not useful for most callers, as
a commit of a transaction without a permanent log reservation must pass
0 here, and all callers for a transaction with a permanent log reservation
except for xfs_trans_roll must pass XFS_TRANS_RELEASE_LOG_RES.  So remove
the flags argument from the public xfs_trans_commit interfaces, and
introduce low-level __xfs_trans_commit variant just for xfs_trans_roll
that regrants a log reservation instead of releasing it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

xfs_trans_cancel takes two flags arguments: XFS_TRANS_RELEASE_LOG_RES and
XFS_TRANS_ABORT.  Both of them are a direct product of the transaction
state, and can be deducted:

 - any dirty transaction needs XFS_TRANS_ABORT to be properly canceled,
   and XFS_TRANS_ABORT is a noop for a transaction that is not dirty.
 - any transaction with a permanent log reservation needs
   XFS_TRANS_RELEASE_LOG_RES to be properly canceled, and passing
   XFS_TRANS_RELEASE_LOG_RES for a transaction without a permanent
   log reservation is invalid.

So just remove the flags argument and do the right thing.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Convert xfs to use ->get_state callback instead of ->get_xstate and
->get_xstatev.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which
tracks space limits and usage in 512-byte blocks. However VFS quotas
track usage in bytes (as some filesystems require that) and we need to
somehow pass this information. Upto now it wasn't a problem because we
didn't do any unit conversion (thus VFS quota routines happily stuck
number of bytes into d_bcount field of struct fd_disk_quota). Only if
you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA
/ Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone
tried this but reportedly some Samba users hit the problem in practice.
So when we want interfaces compatible we need to fix this.

We bite the bullet and define another quota structure used for passing
information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have
to have more conversion routines in fs/quota/quota.c and another copying
of quota structure slows down getting of quota information by about 2%
but it seems cleaner than overloading e.g. units of d_bcount to bytes.

CC: stable@vger.kernel.org
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

We now have several superblock loggin functions that are identical
except for the transaction reservation and whether it shoul dbe a
synchronous transaction or not. Consolidate these all into a single
function, a single reserveration and a sync flag and call it
xfs_sync_sb().

Also, xfs_mod_sb() is not really a modification function - it's the
operation of logging the superblock buffer. hence change the name of
it to reflect this.

Note that we have to change the mp->m_update_flags that are passed
around at mount time to a boolean simply to indicate a superblock
update is needed.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When we log changes to the superblock, we first have to write them
to the on-disk buffer, and then log that. Right now we have a
complex bitfield based arrangement to only write the modified field
to the buffer before we log it.

This used to be necessary as a performance optimisation because we
logged the superblock buffer in every extent or inode allocation or
freeing, and so performance was extremely important. We haven't done
this for years, however, ever since the lazy superblock counters
pulled the superblock logging out of the transaction commit
fast path.

Hence we have a bunch of complexity that is not necessary that makes
writing the in-core superblock to disk much more complex than it
needs to be. We only need to log the superblock now during
management operations (e.g. during mount, unmount or quota control
operations) so it is not a performance critical path anymore.

As such, remove the complex field based logging mechanism and
replace it with a simple conversion function similar to what we use
for all other on-disk structures.

This means we always log the entirity of the superblock, but again
because we rarely modify the superblock this is not an issue for log
bandwidth or CPU time. Indeed, if we do log the superblock
frequently, delayed logging will minimise the impact of this
overhead.

[Fixed gquota/pquota inode sharing regression noticed by bfoster.]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

xfs_fs_get_xstate() and xfs_fs_get_xstatev() check whether there's quota
running before calling xfs_qm_scall_getqstat() or
xfs_qm_scall_getqstatv(). Thus we are certain that superblock supports
quota and xfs_sb_version_hasquota() check is pointless. Similarly we
know that when quota is running, mp->m_quotainfo will be allocated.
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

'flags' have XFS_ALL_QUOTA_ACCT cleared immediately on function entry.
There's no point in checking these bits later in the function. Also
because we check something is going to change, we know some enforcement
bits are being added and thus there's no point in testing that later.
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

More on-disk format consolidation.  A few declarations that weren't on-disk
format related move into better suitable spots.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The error handling in xfs_qm_log_quotaoff() has a couple problems. If
xfs_trans_commit() fails, we fall through to the error block and call
xfs_trans_cancel(). This is incorrect on commit failure. If
xfs_trans_reserve() fails, we jump to the error block, cancel the tp and
restore the superblock qflags to oldsbqflag. However, oldsbqflag has
been initialized to zero and not yet updated from the original flags so
we set the flags to zero.

Fix up the error handling in xfs_qm_log_quotaoff() to not restore flags
if they haven't been modified and not cancel the tp on commit failure.
Remove the flag restore code altogether because commit error is the only
failure condition and we don't know whether the transaction made it to
disk.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.

Errors for conversion (and comparison) found via searches like:

$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs

Negation points found via searches like:

$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs

[ with some bits I missed from Brian Foster ]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

XFS_ERROR was designed long ago to trap return values, but it's not
runtime configurable, it's not consistently used, and we can do
similar error trapping with ftrace scripts and triggers from
userspace.

Just nuke XFS_ERROR and associated bits.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

return is not a function.  "return(EIO);" is silly;
"return (EIO);" moreso.  return is not a function.
Nuke the pointless parens.

[dchinner: catch a couple of extra cases in xfs_attr_list.c,
xfs_acl.c and xfs_linux.h.]
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Coverity noticed that if we sent junk into
xfs_qm_scall_trunc_qfiles(), we could get back an
uninitialized error value.  So sanitize the flags we
will accept, and initialize error anyway for good measure.

(This bug may have been introduced via c61a9e39).

Should resolve Coverity CID 1163872.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

In xfs_qm_scall_trunc_qfiles(), we ignore the error if failed to remove
the users quota metadata and proceed to remove groups and projects if
they are being there.  However, in user space, the remove operation will
break and return if failed to remove any kind of quota.
Also for v5 super block, we can enabled both group and project quota at
the same time, in this case the current error handling will cover the
group error with projects but they might failed due to different reasons.

It seems we'd better the error handling consistent to the user space and
don't trying to remove another kind of quota metadata if the previous
operation is failed.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>

Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.

Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.

The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.

In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.

Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.

Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>

__xfs_printk adds its own "\n".  Having it in the original string
leads to unintentional blank lines from these messages.

Most format strings have no newline, but a few do, leading to
i.e.:

[ 7347.119911] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119911] 
[ 7347.119919] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05
[ 7347.119919] 

Fix them all.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

For XFS, add support for Q_XGETQSTATV quotactl command.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NRich Johnston <rjohnston@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

With the new xfs_trans_res structure has been introduced, the log
reservation size, log count as well as log flags are pre-initialized
at mount time.  So it's time to refine xfs_trans_reserve() interface
to be more neat.

Also, introduce a new helper M_RES() to return a pointer to the
mp->m_resv structure to simplify the input.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

There are a few small helper functions in xfs_util, all related to
xfs_inode modifications. Move them all to xfs_inode.c so all
xfs_inode operations are consiolidated in the one place.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

The on disk format definitions of the on-disk dquot, log formats and
quota off log formats are all intertwined with other definitions for
quotas. Separate them out into their own header file so they can
easily be shared with userspace.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Start using pquotino and define a macro to check if the
superblock has pquotino.

Keep backward compatibilty by alowing mount of older superblock
with no separate pquota inode.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

During the review of seperate pquota inode patches, David noticed
that the test to detect all quotas being turned off was
incorrect, and hence the block was not freeing all the quota
information.

The check made sense in Irix, but in Linux, quota is turned off
one at a time, which makes the test invalid for Linux.

This problem existed since XFS was ported to Linux.

David suggested to fix the problem by detecting when all quotas are
turned off by checking m_qflags.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Add project quota changes to all the places where group quota field
is used:
   * add separate project quota members into various structures
   * split project quota and group quotas so that instead of overriding
     the group quota members incore, the new project quota members are
     used instead
   * get rid of usage of the OQUOTA flag incore, in favor of separate
     group and project quota flags.
   * add a project dquot argument to various functions.

Not using the pquotino field from superblock yet.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead,
start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and
PQUOTA respectively.

On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD.

Read and write of the superblock does the conversion from *OQUOTA*
to *[PG]QUOTA*.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

In preparation for combined pquota/gquota support, for the sake
of readability, do some code cleanup surrounding the affected
code.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Lockdep reports:

=============================================
[ INFO: possible recursive locking detected ]
3.9.0+ #3 Not tainted
---------------------------------------------
setquota/28368 is trying to acquire lock:
 (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50

but task is already holding lock:
 (sb_internal){++++.?}, at: [<c11e8846>] xfs_trans_alloc+0x26/0x50

from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be
allocated.

xfs_qm_scall_setqlim() is starting a transaction and then not
passing it into xfs_qm_dqet() and so it starts it's own transaction
when allocating the dquot.  Splat!

Fix this by not allocating the dquot in xfs_qm_scall_setqlim()
inside the setqlim transaction. This requires getting the dquot
first (and allocating it if necessary) then dropping and relocking
the dquot before joining it to the setqlim transaction.
Reported-by: NMichael L. Semon <mlsemon35@gmail.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
(cherry picked from commit f648167f)