- 19 2月, 2016 6 次提交
-
-
由 Kuninori Morimoto 提交于
commit b5b442ab ("ASoC: rsnd: add .irq callback") added .irq callback but SSI DMA is missing it. This patch adds it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
commit b5b442ab ("ASoC: rsnd: add .irq callback") added .irq support, and it cares both parent SSI and normal SSI. But it should care only normal SSI. Otherwise SSI might be forever loop if SSI is used as both parent SSI and normal SSI (= 2 users), and if under/over run error happen. Because irq disable do nothing in such case. This patch solve this issue. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
To reduce confusion, SSI uses "mod" instead of "ssi" as function parameter Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
SRC_ROUTE_MODE0 determines whether to use SRC. Thus, it should be setup before SRC_SRCIR. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
The channels number is not only for DVC. Let's rename it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 10 2月, 2016 1 次提交
-
-
由 Kuninori Morimoto 提交于
b4c83b17 ("ASoC: rsnd: add Multi channel support") added Multi channel support, and current rsnd_ssi_is_multi_slave()'s check method is !SSI equals SSIM1/2/3. But, SSI parent also hit to this macro. Because of this reason, some stream which needs SSI parent clock can't work correctly. This patch uses rsnd_ssi_multi_slaves() to solve this issue. This issue was reported by Dung. Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 27 1月, 2016 2 次提交
-
-
由 Kuninori Morimoto 提交于
Current rsnd driver has .init/.start/.stop/.quit callbacks, and it needs many IPs (SRC/CTU/MUX/DVC/CMD/SSIU/SSI). Because of these relationship, it might get unnecessary error IRQ when start/stop. This patch adds new .irq callback and control IRQ enable/disable timing to avoid it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound needs recovery (= restart) when under/over run error occurred, and current driver tries it on under/over run error handler automatically. But this recovery should be handled by userland, not kernel. This patch stops XRUN when under/over run error occur, and will leave the recovery of HW in userland. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 23 1月, 2016 15 次提交
-
-
由 Kuninori Morimoto 提交于
commit b761bf27 ("ASoC: rsnd: disable SRC.out only when stop timing") disabled SRC.out/in in different timing, but was based on picky HW information. Now, we have confirmed that we can disable both in the same time. This patch do it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Based on datasheet sequence Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current CTU settings was rough. This patch makes it match to datasheet. But do nothing at this point. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Based on datasheet process Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Based on datasheet Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
SSI/SRC will try to attach DMAC as Audio-DMAC or Audio-DMAC-periperi. It is fixed IP, but will be attached to each streams as different module in case of MUX (= multi sound path will be merged). This patch solves this issue. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
SSI will be used as normal SSI or as clock parent SSI. Therefor, rsnd driver wants to control SSI and parent SSI separately. Otherwise it can't use Playback/Capture in the same time. And it has been done by c2dc47d5("ASoC: rsnd: rsnd_dai_stream has each mod's status insted of rsnd_mod") before. OTOH, rsnd driver doesn't want to control CTU/MUX/DVC/SSIU/SSI in separately. Otherwise, these will be re-initialized during playing if MUX merges 2 sounds. Because of these picky reasons, this patch re-defines status on each mod, and add new parent_ssi_status on rsnd_dai_stream. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
To select CMD data patch, it should use correct SRC from each stream in MUX case. But current code is selecting SRC from fixed stream. This patch solves this issue. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd_cmd_init() overwrites "io" which will be used end of this function. This patch solved this issue. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
CTU/MUX/DVC/SSIU/SSI/Audio-DMAC-periperi might be used under multipath. So, probe()/remove() need to be called multiple times. This patch allows it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
If system uses CTU/MUX, CTU/MUX/DVC will try to connect same CMD to system, but it is not error in this case. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
If system uses CTU/MUX, and if probe error happened, it will try to call rsnd_dai_call(remove, ...). Then, MUX/DVC/SSIU/SSI might be called without calling rsnd_dai_call(probe, ...). Then, each mod status might be un-matched. It doesn't call un-matched remove function by this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_mod_call() tries to call each IP's relevant function. But it is difficult to understand which function returned error. This patch adds debug message for this purpose Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ADG doesn't use rsnd_mod_init(), but this limitation is no longer necessary. Let's use common rsnd_mod_init() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 06 1月, 2016 1 次提交
-
-
由 Dan Carpenter 提交于
The bitwise OR has higher precedence than ?: so the val2 was always set to 0x2. Fixes: b4c83b17 ('ASoC: rsnd: add Multi channel support') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 31 12月, 2015 1 次提交
-
-
由 Andrzej Hajda 提交于
Field usrcnt is unsigned so it cannot be lesser than zero. The patch fixes the check, moves it to the beginning of the function and changes return value to -EIO in case of usercnt error. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 23 12月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch adds Multi channel support on Renesas R-Car sound. This patch is tested on Salvator-X board, but it can't use Multi channel, because supported format is different between codec chip and R-Car. Thus, it was tested on board which doesn't mount codec chip, with oscilloscope. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 18 12月, 2015 11 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver is using complex macro to parse DAI connection. This patch adds new rsnd_parse_connect_common() and replace current macro to it. This is prepare for multi channel support Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
TDM will use 6 or 8 slots on 1 SSI, and Multi channel will use 6 or 8 slots on few SSI (each SSI uses 2 slots). Thus, this adds new slot control functions which can be prepare for Multi channel support. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_get_slot_rdai() returns total slots (it returns 6 if total 6 channels) , and rsnd_get_slot_extend() returns extended SSI width (it returns 8 if total 6 channels). This will be used on SSI multi channel support too (It will return 2 if total 6 channels with 3 SSI). But, it is using confusable naming. This patch changes rsnd_get_slot_rdai() -> rsnd_get_slot(), rsnd_get_slot_extend() -> rsnd_get_slot_width() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current Renesas sound driver is using rsnd_get_slot_runtime(), but it is same as runtime->channels. This patch removes rsnd_get_slot_runtime() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current SSI/SSIU are using rsnd_get_slot_runtime() to check TDM, but using rsnd_get_slot_extend() is more sane. This patch fix it up Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
It can't output corrent dma name *before* rsnd_mod_init(). It goes to *after* rsnd_mod_init() by this patch Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound driver has rsnd_get_adinr_bit/chan() functions. It is assuming _bit() returns ADINR :: OTBL, and _chan() returns ADINR :: CHNUM. Current _bit() returns both OTBL and CHNUM. This patch fixup it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
SSIU should be controlled after SSI. This patch fix up it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 17 12月, 2015 2 次提交
-
-
由 Kuninori Morimoto 提交于
rsrc-card is DPCM supported version of simple-card. Thus it has similar DT format. OTOH, snd_soc_dai_link requests cpu/codec, but one of them will be snd-soc-dummy in DPCM case, and DPCM requests frontend/backend dai_link. This means it might have multi backend/codec. And, SND_SOC_DAIFMT_xxx is based on "codec". Because of these difference, current rsrc card can't detect correct dai_fmt. This patch detect correct dai fmt from 1st "codec". Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
1efb53a2 ("ASoC: simple-card: Remove support for setting differing DAI formats") removed set_fmt support from simple-card. rsrc-card follows same style, because it is based on simple-card. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-