- 04 1月, 2014 40 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The maximum permissible values for noise floor in ETSI and Japan domains have been updated with new EU regulations for CCA detection. Adjust the values in the driver accordingly. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
AR955x has problems with RX sensitivity in 2G. This patch adds a routine to select range_osdac dynamically on a per-chain basis to address this issue. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Engelmayer 提交于
Fix a memory leak in the cw1200_wow_suspend() error handling path. Signed-off-by: NChristian Engelmayer <cengelma@gmx.at> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h, ieee80211_bar defined in include/linux/ieee80211.h and ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: at76_priv defined in drivers/net/wireless/at76c50x-usb.h and ieee80211_mgmt defined in include/linux/ieee80211.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structure involved is libipw_network defined in drivers/net/wireless/ipw2x00/libipw.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h, il_priv defined in drivers/net/wireless/iwlegacy/common.h and il_rxon_cmd defined in drivers/net/wireless/iwlegacy/commands.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and rtl_mac defined in drivers/net/wireless/rtlwifi/wifi.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and mwl8k_priv defined in drivers/net/wireless/mwl8k.c This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h and p54_common defined in drivers/net/wireless/p54/p54.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_mgmt defined in include/linux/ieee80211.h and ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_bar defined in include/linux/ieee80211.h and rt2x00_bar_list_entry defined in drivers/net/wireless/rt2x00/rt2x00.h. This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Initialize "sync_cause" to zero since commit "ath9k: move ath9k_debug_sync_cause out of ath9k_hw" fills it conditionally based on ISR status. Not doing this results in garbage values in debugfs. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
AR9100 requires a larger delay after waking up the RTC. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
* Move initialization of config variables to ath9k_hw_init_config(). * Move initialization of defaults to ath9k_hw_init_defaults(). Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
There is no point in trying to bring up the chip when the MAC version is not present in the supported list. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
IRQ save/restore is not required for the cycle counters since they are accessed only from softirq and process context. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Move the BB processing code to the tasklet and avoid doing it in the ISR, there is no real benefit and this makes the ISR less heavy. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This patch removes the convoluted and hacky method of monitoring for connectivity. We rely on mac80211's connection loss logic and doing it in the driver is not necessary. The HW check for MAC/BB hangs is also simplified, there is no need to have a separate work instance for it. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Do a HW reset only for required signatures. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
A full HW reset is not required for all baseband watchdog signatures. Some BB watchdog updates are benign and can be discarded, some require re-programming of certain registers and others require a chip reset. This patch adds a routine to identify such signatures. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Program the required baseband watchdog interrupt mask to ensure that the correct watchdog interrupts are raised when the BB is hung for some reason. Also, use the capability HW_BB_WATCHDOG instead of relying on other flags. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The PHY restart workaround that handles baseband hangs for packets with unsupported rates is required only for a HW bug in AR9300 v2.2. All the subsequent chips in the AR9003 family do not require this driver fix since it has been addressed in the HW. Since the value of the AR_PHY_RESTART register is written with the default initvals, make sure that PHY restart is always disabled once this particular BB hang signaure has been encountered. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The current method of identifying MAC hangs is convoluted and also, the signatures are wrong and don't apply to all the chips in the AR9003 family. Fix this by cleaning up the code and checking for the correct hang signatures. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This is required for adding separate hang check routines for AR9002 and AR9003. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
HW hang checks have to be done on a per-chip basis. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The maximum A-MPDU size is calculated in ath_tx_aggr_start(), so there is no need to do it in node_attach() too. Also, make sure that the correct size is calculated as described in 8.4.2.58.3. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Josh Triplett 提交于
The kernel already has this information, and individual drivers shouldn't duplicate that. This also eliminates the use of __DATE__ and __TIME__, which make the build non-deterministic. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Since the unit is microseconds and not milliseconds, tv_sec needs to be multiplied by 1000000, not 1000. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
If a gentimer has both the trigger and the overflow bits set, only mask out the trigger bit if an overflow handler is present. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-