The offset field in struct btrfs_extent_ref records the position
inside file that file extent is referenced by. In the new back
reference system, tree leaves holding references to file extent
are recorded explicitly. We can scan these tree leaves very quickly, so the
offset field is not required.

This patch also makes the back reference system check the objectid
when extents are in deleting.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Checksum items take up a significant portion of the metadata for large files.
It is possible to avoid reading them during truncates by checking the keys in
the higher level nodes.

If a given leaf is followed by another leaf where the lowest key is a checksum
item from the same file, we know we can safely delete the leaf without
reading it.

For a 32GB file on a 6 drive raid0 array, Btrfs needs 8s to delete
the file with a cold cache.  It is read bound during the run.

With this change, Btrfs is able to delete the file in 0.5s
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This improves the comments at the top of many functions.  It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.

extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch updates the space balancing code to utilize the new
backref format.  Before, btrfs-vol -b would break any COW links
on data blocks or metadata.  This was slow and caused the amount
of space used to explode if a large number of snapshots were present.

The new code can keeps the sharing of all data extents and
most of the tree blocks.

To maintain the sharing of data extents, the space balance code uses
a seperate inode hold data extent pointers, then updates the references
to point to the new location.

To maintain the sharing of tree blocks, the space balance code uses
reloc trees to relocate tree blocks in reference counted roots.
There is one reloc tree for each subvol, and all reloc trees share
same root key objectid. Reloc trees are snapshots of the latest
committed roots of subvols (root->commit_root).

To relocate a tree block referenced by a subvol, there are two steps.
COW the block through subvol's reloc tree, then update block pointer in
the subvol to point to the new block. Since all reloc trees share
same root key objectid, doing special handing for tree blocks
owned by them is easy. Once a tree block has been COWed in one
reloc tree, we can use the resulting new block directly when the
same block is required to COW again through other reloc trees.
In this way, relocated tree blocks are shared between reloc trees,
so they are also shared between subvols.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated.  This allows us to do accounting for them properly.

* The balancing code relocates data extents indepdent of the underlying
inode.  The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).

* Don't take the drop_mutex in the create_subvol ioctl.  It isn't
required.

* Fix walking of the ordered extent list to avoid races with sys_unlink

* Change the lock ordering rules.  Transaction start goes outside
the drop_mutex.  This allows btrfs_commit_transaction to directly
drop the relocation trees.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size.  The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing.  If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible.  When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.

2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset.  also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.

3) cleaned up the allocation code to make it a little easier to read and a
little less complicated.  Basically there are 3 steps, first look from our
provided hint.  If we couldn't find from that given hint, start back at our
original search start and look for space from there.  If that fails try to
allocate space if we can and start looking again.  If not we're screwed and need
to start over again.

4) small fixes.  there were some issues in volumes.c where we wouldn't allocate
the rest of the disk.  fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space.  Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space.  Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups.  The alloc_hint has fixed
this slight degredation and made things semi-normal.

There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space.  This only happens with metadata
allocations, and only when we are almost full.  So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall.  I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It was incorrectly adding an extra sizeof(struct btrfs_item) and causing
false positives (oops)
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Fix a bunch of trivial sparse complaints.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Add two missing endianess conversions in this function, found by sparse.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree.  There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.

After a crash, items are copied out of the log tree and back into the
subvolume.  See tree-log.c for all the details.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A btree block cow has two parts, the first is to allocate a destination
block and the second is to copy the old bock over.

The first part needs locks in the extent allocation tree, and may need to
do IO.  This changeset splits that into a separate function that can be
called without any tree locks held.

btrfs_search_slot is changed to drop its path and start over if it has
to COW a contended block.  This often means that many writers will
pre-alloc a new destination for a the same contended block, but they
cache their prealloc for later use on lower levels in the tree.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The memory reclaiming issue happens when snapshot exists. In that
case, some cache entries may not be used during old snapshot dropping,
so they will remain in the cache until umount.

The patch adds a field to struct btrfs_leaf_ref to record create time. Besides,
the patch makes all dead roots of a given snapshot linked together in order of
create time. After a old snapshot was completely dropped, we check the dead
root list and remove all cache entries created before the oldest dead root in
the list.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Much of the IO done while dropping snapshots is done looking up
leaves in the filesystem trees to see if they point to any extents and
to drop the references on any extents found.

This creates a cache so that IO isn't required.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We should decrease the found slot by one as btrfs_search_slot does
when bin_search return 1 and node level > 0.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This calls unlock_up sooner in btrfs_search_slot in order to decrease the
amount of work done with the higher level tree locks held.

Also, it changes btrfs_tree_lock to spin for a big against the page lock
before scheduling.  This makes a big difference in context switch rate under
highly contended workloads.

Longer term, a better locking structure is needed than the page lock.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btree defragger wasn't making forward progress because the new key wasn't
being saved by the btrfs_search_forward function.

This also disables the automatic btree defrag, it wasn't scaling well to
huge filesystems.  The auto-defrag needs to be done differently.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The online btree defragger is simplified and rewritten to use
standard btree searches instead of a walk up / down mechanism.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This creates one kthread for commits and one kthread for
deleting old snapshots.  All the work queues are removed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This lowers the impact of snapshot deletion on the rest of the FS.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Allocations may need to read in block groups from the extent allocation tree,
which will require a tree search and take locks on the extent allocation
tree.  But, those locks might already be held in other places, leading
to deadlocks.

Since the alloc_mutex serializes everything right now, it is safe to
skip the btree locking while caching block groups.  A better fix will be
to either create a recursive lock or find a way to back off existing
locks while caching block groups.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This allows us to delete an unlinked inode with dirty pages from the list
instead of forcing commit to write these out before deleting the inode.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

One lock per btree block can make for significant congestion if everyone
has to wait for IO at the high levels of the btree.  This drops
locks held by a path when doing reads during a tree search.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Extent alloctions are still protected by a large alloc_mutex.
Objectid allocations are covered by a objectid mutex
Other btree operations are protected by a lock on individual btree nodes
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The allocation trees and the chunk trees are serialized via their own
dedicated mutexes.  This means allocation location is still not very
fine grained.

The main FS btree is protected by locks on each block in the btree.  Locks
are taken top / down, and as processing finishes on a given level of the
tree, the lock is released after locking the lower level.

The end result of a search is now a path where only the lowest level
is locked.  Releasing or freeing the path drops any locks held.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* Force chunk allocation when find_free_extent has to do a full scan
* Record the max key at the start of defrag so it doesn't run forever
* Block groups might not be contiguous, make a forward search for the
  next block group in extent-tree.c
* Get rid of extra checks for total fs size
* Fix relocate_one_reference to avoid relocating the same file data block
  twice when referenced by an older transaction
* Use the open device count when allocating chunks so that we don't
  try to allocate from devices that don't exist
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When duplicate copies exist, writes are allowed to fail to one of those
copies.  This changeset includes a few changes that allow the FS to
continue even when some IOs fail.

It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

balance level starts by trying to empty the middle block, and then
pushes from the right to the middle.  This might empty the right block
and leave a small number of pointers in the middle.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This isn't required anymore because we don't reallocate blocks that
have already been written in this transaction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Block headers now store the chunk tree uuid

Chunk items records the device uuid for each stripes

Device extent items record better back refs to the chunk tree

Block groups record better back refs to the chunk tree

The chunk tree format has also changed.  The objectid of BTRFS_CHUNK_ITEM_KEY
used to be the logical offset of the chunk.  Now it is a chunk tree id,
with the logical offset being stored in the offset field of the key.

This allows a single chunk tree to record multiple logical address spaces,
upping the number of bytes indexed by a chunk tree from 2^64 to
2^128.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>