This is enough for fbcon and bringing up X using
xf86-video-modesetting.  It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches.  Do manual init
    ordering instead of using the .load hook.  Structure registration
    more like tegra's, but still using the typical "component" code.
    Drop no-op hooks for atomic_begin and mode_fixup() now that
    they're optional.  Drop sentinel in Makefile.  Fix minor style
    nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
    of having a fixed video mode.  Use exynos-style component driver
    matching instead of devicetree nodes to list the component driver
    instances.  Rename compatibility strings to say bcm2835, and
    distinguish pv0/1/2.  Clean up some h/vsync code, and add in
    interlaced mode setup.  Fix up probe/bind error paths.  Use
    bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
    that other bugs have been fixed, add timeouts to cpu_relax()
    loops, rename hpd-gpio to hpd-gpios.
Signed-off-by: NEric Anholt <eric@anholt.net>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Typo that snuck in with commit 6979c630Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Reported-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Broken since "gr: convert user classes to new-style nvkm_object"

Tested on a PPC64 G5 + NV34
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Due to some recent changes in
drm_helper_probe_single_connector_modes_merge_bits(), old custom modes
were not being pruned properly. In current kernels,
drm_mode_validate_basic() is called to sanity-check each mode in the
list. If the sanity-check passes, the mode's status gets set to to
MODE_OK. In older kernels this check was not done, so old custom modes
would still have a status of MODE_UNVERIFIED at this point, and would
therefore be pruned later in the function.

As a result of this new behavior, the list of modes for a device always
includes every custom mode ever configured for the device, with the
largest one listed first. Since desktop environments usually choose the
first preferred mode when a hotplug event is emitted, this had the
result of making it very difficult for the user to reduce the size of
the display.

The qxl driver did implement the mode_valid connector function, but it
was empty. In order to restore the old behavior where old custom modes
are pruned, we implement a proper mode_valid function for the qxl
driver. This function now checks each mode against the last configured
custom mode and the list of standard modes. If the mode doesn't match
any of these, its status is set to MODE_BAD so that it will be pruned as
expected.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just like single link MIPI panels, similarly for dual link panels, pipe
to be configured is based on the DVO port from VBT Block 2. In hardware,
Port A is mapped with Pipe A and Port C is mapped with Pipe B.

This issue got introduced in -

commit 7e9804fd
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Fri Jan 16 14:27:23 2015 +0200

    drm/i915/dsi: add drm mipi dsi host support

Cc: stable@vger.kernel.org # v4.0
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If one disables DDR DVFS in the BIOS, Punit will apparently ignores
all DDR DVFS request. Currently we assume that DDR DVFS is always
operational, which leads to errors in dmesg when the DDR DVFS requests
time out.

Fix the problem by gently prodding Punit during driver load to find out
whether it will respond to DDR DVFS requests. If the request times out,
we assume that DDR DVFS has been permanenly disabled in the BIOS and
no longer perster the Punit about it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91629Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>
Tested-by: NClint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fix a wrong logical AND (&&) used for the range check of CSR MMIO.

Spotted nicely by gcc -Wlogical-op flag:
  drivers/gpu/drm/i915/intel_csr.c: In function ‘finish_csr_load’:
  drivers/gpu/drm/i915/intel_csr.c:353:41: warning: logical ‘and’ of mutually exclusive tests is always false [-Wlogical-op]

Fixes: eb805623 ('drm/i915/skl: Add support to load SKL CSR firmware.')
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit
reads. Due to the nature of the registers we try to read in this manner,
they may increment between the two instruction (e.g. a timestamp
counter). To keep the result accurate, we repeat the read if we detect
an overflow (i.e. the upper value varies). However, some hardware is just
plain flaky and may endless loop as the the upper 32bits are not stable.
Just give up after a couple of tries and report whatever we read last.

v2: Use the most recent values when erring out on an unstable register.

Reported-by: russianneuromancer@ya.ru
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

connector->encoder is initialized as NULL. Fix this by setting it in
during pre enable. MST connectors are not read out during initial hw
readout, and have no fixed encoder mappings. So it's harmless to
return false when the connector has never been assigned to an encoder.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

It should be gfx_v8_0_init_compute_vmid since it's
part of the gfx block.
Acked-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to properly handle the instances for the idle
checks and soft reset.
Acked-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Tested-and-Reviewed-by: NSonny Jiang <sonny.jiang@amd.com>

This fixes not printing VM faults.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This should never happen so warn when the count does
not equal the expected size.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.

Port of radeon commit 4b095566.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

The logic was reversed.  This feature is not enabled
at the moment, but fix it now for the future.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using the wrong watermwark value for the secondary
watermark.  Copy paste typo.  Noticed by Mykola.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Using the wrong watermwark value for the secondary
watermark.  Copy paste typo.  Noticed by Mykola.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Should help avoid fragmentation of vram due to CPU access
requirements.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For kernel driver BOs, be explicit about whether we need
vram access up front.  This avoids unecessary migrations and
avoids using visible vram for buffers were it's not needed.

v2: line wrap fixes
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will make sure that audio callbacks do not race with
component bind/unbind.

[Note: this is an update patch to commit [51e1d83c: drm/i915: Call
 audio pin/ELD notify function] where I mistakenly applied the older
 version.  Jani and Daniel's review tags were to the latest version,
 so I add them below, too -- tiwai]
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The port_mst_index parameter was reserved for future use, but
maintainers prefer to add it later when it is actually used.

[Note: this is an update patch to commit [51e1d83c: drm/i915: Call
 audio pin/ELD notify function] where I mistakenly applied the older
 version.  Jani and Daniel's review tags were to the latest version,
 so I add them below, too -- tiwai]
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Customize the insert_nop func for SDMA rings, and use burst NOP for
ring/IB submissions in other places as well
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The insert_nop function is added to amdgpu_ring_funcs structure as
well as the default implementation
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This function is added to map the ring to sdma instance
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the hardcoded usage
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The burst NOP is supported for SDMA when feature_version is >= 20.
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This is added to support the burst NOP

v2: squash the typo fix
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of the array which is used for ID management.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>

with interruptible, the push_job maybe return -ERESTARTSYS,
then result in push_job error.

E.g. bug trace:
[  181.618860] *****amdgpu_copy_buffer:fence->seq:0x0000000048d8758b, contxt:1207959552, ref:683967304, r:-512
[  181.618929] BUG: unable to handle kernel paging request at ffffffff811aa266
[  181.625887] IP: [<ffffffff81548ffc>] reservation_object_add_excl_fence+0x3c/0x120
...
[  181.859767]  [<ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[  181.865928]  [<ffffffffc0608ac1>] ttm_bo_move_accel_cleanup+0x41/0x3c0 [ttm]
[  181.872971]  [<ffffffffc062d382>] amdgpu_move_blit.isra.18+0x122/0x150 [amdgpu]
[  181.880254]  [<ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[  181.886420]  [<ffffffffc062d709>] amdgpu_bo_move+0xa9/0x200 [amdgpu]
[  181.892753]  [<ffffffffc0606e8d>] ttm_bo_handle_move_mem+0x26d/0x5c0 [ttm]
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

No copy_(to|from)_user while BO is reserved.

v2: handle default path as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>

That isn't used any more.

v2: rebase
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: NJeffery Miller <jmiller@neverware.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

sync_resv is to handle both amdgpu_fence and sched_fence.
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian K?nig <christian.koenig@amd.com>

AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.

Port of:
drm/radeon/atom: Send out the full AUX address
to amdgpu
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Looking other drm drivers, there is no the restriction that framebuffer
has only one buffer in .create_handle() callback. They use just first
buffer.

If this limitation is removed, there is no reason keeping buffer count
for framebuffer, so we can remove buf_cnt from struct exynos_drm_fb.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

We can get buffer count of framebuffer using drm_format_num_planes(), so
keeping exynos_drm_fb_get_buf_cnt() is unnecessary.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>