Some builds may not support the proc-comm interface with
the baseband processor.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Featurize gpiomux so that systems like 7x00 which do not wish to use it
do not have to be saddled with the configuration tables.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:

- gpio power-collapse, which is managed by a peripheral processor on
  other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
  is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
  configurations except for generic-gpio mode (func_sel 0), in which
  case the gpio_direction_* functions should be used.  Having these
  bits in the tlmm api leads to confusion and misuse of the gpiolib
  api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
  use-case, which is a single massive configuration at boot.  Rather
  than forcing hundreds of 'config' function calls, the new api
  allows data to be configured with a single table.

gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Enables basic boot support for the MSM7x30 SURF development
board.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

Enable CONFIG_ARCH_QSD8X50.  This is the first SOC with the
Scorpion processor.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>

This removes the Kconfig menu option. SMD can still be selected
but it's done inside the Kconfig file and not via the menu.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This modifies SMD to use either the package v3 or package v4,
but not both. The current code tries to allocate as v4 on all
system which can produce a scary looking error message on boot up,

smem_find(16, 40): wrong size 16424
smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'

With this error the code then falls back on the package v3 allocation
method. This method is inefficient because it causes a slow down
on some systems even when the allocation method can be determined
at compile time. It also causes a kernel size increase that effects
all system and is not needed.

This change corrects the allocation to use one method or the other
and not both.
Signed-off-by: NDaniel Walker <c_dwalke@quicinc.com>

This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor.  Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.
Signed-off-by: NBrian Swetland <swetland@google.com>

ARCH_MSM supports armv7 cpus, so we're pushed the CPU_V6/CPU_V7 selection
down into the arch/arm/mach-msm/Kconfig.

Also update the description to be a bit more accurate.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

This is just enough to get the device booting and serial console
working.  Sufficient for debugging further MSM7k/Dream Support.
This will support HTC Dream / T-Mobile G1 / Android ADP1 (which
are all the same hardware, known as "trout" to the ARM machine
database).
Signed-off-by: NBrian Swetland <swetland@google.com>
Reviewed-by: NGeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Provides options to select one of the three "lowspeed" UARTs
on MSM7k SoCs for DEBUG_LL output from the zImage decompressor
and kernel.
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

The MSM architecture covers a wider family of chips than just the MSM7X00A.
Move to a more generic name, in perparation for supporting the specific
SoC variants as sub-architectures (ARCH_MSM7X01A, ARCH_MSM722X, etc).  This
gives us ARCH_MSM for the (many) common peripherals.

This also removes the unused/obsolete config item MSM7X00A_IDLE.
Signed-off-by: NBrian Swetland <swetland@google.com>

Add support for the Qualcomm MSM7200A eval board.
Common devices are defined in common.c, to avoid excessive
cut'n'pasting them into other board files.
Signed-off-by: NBrian Swetland <swetland@google.com>