This patch adds support for setting listen before transmit mode via
nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid max frame retries check from driver
layer. This is already handled by nl802154 framework. Also the IEEE
802.15.4 standard doesn't allow a frame retries setting above 7. This
seems to be valid for the at86rf230 transceiver but the chip running out
of spec then. We only allow settings according 802.15.4 right now.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch add support for setting mac frame retries setting via
nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid check on max csma backoffs in driver
layer. This is already handled by nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch add support for max csma backoffs setting via nl802154
framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid backoff exponent check from driver layer.
This is already handled by nl802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting backoff exponents via nl802154
framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting short address via nl802154 framework.
Also added a comment because a 0xffff seems to be valid address that we
don't have a short address. This is a valid setting but we need
more checks in upper layers to don't allow this address as source address.
Also the current netlink interface doesn't allow to set the short_addr
to 0xffff. Same for the 0xfffe short address which describes a not
allocated short address.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting pan_id via nl802154 framework.
Adding a comment because setting 0xffff as pan_id seems to be valid
setting. The pan_id 0xffff as source pan is invalid. I am not sure now
about this setting but for the current netlink interface this is an
invalid setting, so we do the same now. Maybe we need to change that
when we have coordinator support and association support.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes validation of page and channel while setting from
driver layer. This is already handled by nl802154 and mac802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds page and channel setting support to nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This is patch is cleanup to have a similar indentation like cfg80211
implementation.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a netdev notifier for interface renaming. We have a name
attribute inside of subif data struct. This is needed to have always the
actual netdev name in sdata name attribute.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch changes the module description like wireless which is IEEE
802.11 "subsystem" and not "implementation".
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds an unique id for an wpan_phy. This behaviour is mostly
grabbed from wireless stack. This is needed for upcomming patches which
identify the wpan netdev while NETDEV_CHANGENAME in netdev notify function.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Instead of always re-lock the iflist_mtx at multiple interfaces we lock
the complete for each loop at start and at the end.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch is just a cleanup to name the temporary variable for
protected list for each loop as tmp.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch move the iface unregistration into iface.c file to have
a behaviour which is similar like mac80211. Also iface handling should
be inside iface.c file only.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When kfree() is all that's needed to free an object protected by RCU
there's a kfree_rcu() convenience function that can be used. This patch
updates the 6lowpan code to use this, thereby eliminating the need for
the separate peer_free() function.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fixes a regression that was introduced by commit
cb77c3ec. In addition to BT_CONFIG,
BT_CONNECTED is also a state in which we may get a remote name and need
to indicate over mgmt the connection status. This scenario is
particularly likely to happen for incoming connections that do not need
authentication since there the hci_conn state will reach BT_CONNECTED
before the remote name is received.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Correct the comments in this driver. Set the CRTSCTS flag means
automatic flow control is enabled.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This fixes the following sparse warning:

net/bluetooth/amp.c:152:53: warning: Variable length array is used.

The warning itself is probably harmless since this kind of usage of
shash_desc is present also in other places in the kernel (there's even a
convenience macro SHASH_DESC_ON_STACK available for defining such stack
variables). However, dynamically allocated versions are also used in
several places of the kernel (e.g. kernel/kexec.c and lib/digsig.c)
which have the benefit of not exhibiting the sparse warning.

Since there are no more sparse warnings in the Bluetooth subsystem after
fixing this one it is now easier to spot whenever new ones might get
introduced by future patches.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a netif_running check while trying to change the address
attributes via ioctl. While netif_running is true these attributes
should be only readable.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a hacked solution for an interface dump with a running
lowpan interface. This will crash because lowpan and wpan interface use
the same arphdr. To change the arphdr will change the UAPI, this patch
checks on mtu which should on lowpan interface always different than
IEEE802154_MTU.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds rtnl lock hold mechanism while accessing wpan_dev
attributes. Furthermore these attributes should be protected by rtnl
lock and netif_running only.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the setting of dev_addr on a monitor device. This
address should be zero. A monitor should only sniff and send raw frames
out. The address should be never used by upper layers and receiving
frame parsing.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for wpan_dev dump via nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for dumping wpan_phy attributes via nl802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a basic nl802154 framework. Most of this code was
grabbed from nl80211 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds the new userspace header for nl802154. We don't place
this header in include/uapi now. This header could be modified in the
next time.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds new sysfs entries for wpan_phy index and name. This
needed for the new 802.15.4 userspace tool.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a wpan_dev_list list into cfg802154_registered_device
struct. Also adding new wpan_dev into this list while
cfg802154_netdev_notifier_call. This behaviour is mostly grab from
wireless core.c implementation and is needed for preparing nl802154
framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds an iftype argument to the wpan_dev. This is needed to
get the interface type from netdev ieee802154_ptr. The subif data struct
can only accessible in mac802154 branch.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a new cfg802154_rdev_list to remember all registered
cfg802154_registered_device structs. This is needed to prepare the
upcomming nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch renames the wpan_phy_alloc function to wpan_phy_new. This
naming convention is like wireless and "wiphy_new" function.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the mac_params from subif data struct. Instead we
manipulate the wpan attributes directly.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch moves all mac pib attributes into the wpan_dev struct.
Furthermore we can easier access these attributes over the netdev
802154_ptr pointer. Currently this is only possible over a complicated
callback structure in mac802154 because subif data structure is
accessable inside mac802154 only.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch reverts commit:

a7807d73 ("Bluetooth: 6lowpan: Avoid memory leak if memory allocation
fails")

which was wrong suggested by Alexander Aring. The function skb_unshare
run also kfree_skb on failure.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 3.18.x

If a remote name request is initiated while acl connection is going on,
and if it fails then mgmt_connected will be sent. Evetually after acl
connection, authentication will not be initiated and userspace will
never get pairing reply.

< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr AA:BB:CC:DD:EE:FF ptype 0xcc18 rswitch 0x01 clkoffset 0x2306 (valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Inquiry Complete (0x01) plen 1
    status 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr AA:BB:CC:DD:EE:FF mode 1 clkoffset 0x2306
> HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x0c ncmd 1
    Error: Command Disallowed
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 50 bdaddr 00:0D:FD:47:53:B2 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 50
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 50 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 50
    Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 50 page 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 50 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00

This patch sends mgmt_connected in remote name command status only if
conn->state is BT_CONFIG
Signed-off-by: NJaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Currently we ensure that the skb is freed on every error path in IPHC
decompression which makes it easy to introduce skb leaks.  By centralising
the skb_free into the receive function it makes future decompression routines
easier to maintain.  It does come at the expense of ensuring that the skb
passed into the decompression routine must not be copied.
Signed-off-by: NMartin Townsend <mtownsend1973@gmail.com>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>