This reverts commit fabf85e3 which breaks
hotkey support on some other HP laptops. We'll try doing this differently
in 3.10.
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Selecting BACKLIGHT_CLASS_DEVICE doesn't guarantee that any of its
dependencies are enabled, and these are complicated. Depending isn't ideal
for configuration UI purposes, but is probably more appropriate here.
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

I've got a report of build failure on ideapad-laptop, which shows

drivers/built-in.o: In function `ideapad_acpi_notify':
ideapad-laptop.c:(.text+0x63876a): undefined reference to `backlight_force_update'
drivers/built-in.o: In function `ideapad_acpi_remove':
ideapad-laptop.c:(.devexit.text+0x64a7): undefined reference to `backlight_device_unregister'
drivers/built-in.o: In function `ideapad_acpi_add':
ideapad-laptop.c:(.devinit.text+0x45e28): undefined reference to `backlight_device_register'

To select backlight subsystem can prevent this error from happening.

Also update comment for this driver.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Add the two other i2c buses (vga and panel) from i915.
Chromebook Pixel has input and light sensor devices on these busses.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The Chromebook Pixel uses an isl29023 ambient light sensor on the PANEL
GMBus.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This will allow us to assign devices to buses by the type enum.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Instantiate the atmel mxt1664s touchscreen on this system.
The touchscreen may appear at two possible addresses:
0x4a in operational mode.
0x26 in bootloader mode.
Signed-off-by: NYufeng Shen <miletus@chromium.org>
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This will allow support for devices that may appear at more than
one i2c address at boot time. The specific example is the atmel_mxt touch
devices, which may appear at a different address if it comes up
in bootloader mode.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Instantiate the atmel mxt224s trackpad on this system.
The trackpad may appear at two possible addresses:
0x4b in operational mode.
0x25 in bootloader mode.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The driver will not quite work if someone unbinds the platform device
from the platform driver via sysfs (moreover it will bomb is the driver
built into the kernel as hp_wmi_bios_remove is marked as __exit and will
not be present in the kernel).

To fix it let's use platform_driver_probe() instead of
platform_driver_register(), which disables binding/unbinding via sysfs.
This also allows us to mark hp_wmi_bios_setup as __init and discard it
once module is initialized.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

We need to decrement "i" first because the current "i" was not allocated
succesfully.  Also we should go free the way down to zero to avoid a
leak.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Several models of HP laptops using the same DSDT have hotkey buttons
that do not work until the EC is configured to enable them.
Signed-off-by: NKyle Evans <kvans32@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Fix the following build warning

CC [M]  drivers/platform/x86/asus-wmi.o
drivers/platform/x86/asus-wmi.c:1356:13: warning: ‘do_nothing’ defined but not used [-Wunused-function]
Signed-off-by: NShuah Khan <shuah.khan@hp.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Fengguang Wu run kernel build test to platform-drivers-x86/linux-next git tree
on x86_64 architecture and found a warning that was introduced by
727651bf738b6b917335025d09323d0962eda114 commit:

drivers/platform/x86/acer-wmi.c: In function ‘WMID_set_capabilities’:
drivers/platform/x86/acer-wmi.c:1211: warning: ‘devices’ may be used
uninitialized in this function

This patch fixes the above warning message.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Handle HKEY event generated on AC power change. The current message
asks users to submit data related to this event which leads to
a lot of confusion and noise on the mailing list.

The following is a list affected models and 'Message-Id'
from ibm-acpi-devel@lists.sourceforge.net of people who saw this
event when either plugging or unplugging the AC adapter or
docking or undocking their laptop.

X120e - CAAAujb5v9dHdbdxDVvhNJoG4UrZC1TgKqeB_zGpAy7q8kZHMEQ@mail.gmail.com
X121e - 20120817143459.GB3462@x1.osrc.amd.com
X220  - Confirmed by Richard Hartmann
X220i - 4F406274.7070807@gmail.com
X220t - 4F489F5B.9040705@cs.tu-berlin.de
X230  - CAKx4u7kqvVH0-gstomsiVYdGC0i6=bGxzaQ8sq9gbg76TGme3w@mail.gmail.com
T420  - 9c848ee30b006737d0534d906bab0cf6@niklaas-baudet.net
T420s - 20120608080824.GS25324@hexapodia.org
W520  - 20121008181050.GF2549@ericlaptop.home.christensenplace.us
Signed-off-by: NRichard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Add support for the HP Pavilion 14 Chromebook's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The Samsung Series 5 Chromebook is equipped with  a Taos tsl2583
light sensor. Instatiate it here.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Two legacy Chromebooks, the Cr-48, and the Acer AC700,
are equipped with a Taos tsl2563 light sensor.
This will instantiate the sensor on those laptops.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Add support for the Acer C7's trackpad, which is a reuse
of the Samsung Series 5 550 trackpad.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The Cypress trackpad on smbus is used on other systems
as well. Lets make the name more generic.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Z series and other recent models have 0x14? for lid and keyboard
backlight.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The call to handlers 0x124 and 0x135 (rfkill control) seems to take a
bitmask to control various states of the device. For our rfkill we need
a fully on/off. SVZ1311Z9R/X's LTE modem needs more bits up.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47751Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Cc: stable@kernel.org

This adds the chromeos_laptop driver. It supports
the Cypress APA SMBUS touchpad as well as the isl29018 i2c ambient
light sensor on the Samsung Series 5 550 Chromebook.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Reviewed-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

The new B series BIOS has version string 43CN46WW. The driver
requires that 2nd and 3rd characters be 'E' and 'T' respectively,
where as the newer BIOS has 'C' and 'N' respectively. Failing to
load the module causes some of the hotkeys to not work.

Before the patch
================
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.5.0-15-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device

After the patch
===============
[44937.265438] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[44937.265445] thinkpad_acpi: http://ibm-acpi.sf.net/
[44937.265449] thinkpad_acpi: ThinkPad BIOS 43CN46WW, EC unknown
[44937.265453] thinkpad_acpi: Lenovo Lenovo B470e, model HuronRiver Platform
[44937.266479] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[44937.266557] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[44937.267846] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[44937.268131] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NJames Ferguson <james.ferguson@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Add rfkill support for the GPS radio found in HP laptops (HP Elitebook 2170p and the like)
using the Ericsson F5321/H5321 Mobile Broadband Module.
Signed-off-by: NViliam Trepák <trepo@netcomga.sk>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Found another Lenovo ideapad S205 the product name is 1038DPG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.

So, add this patch to support Lenovo ideapad S205-1038DPG wifi hardware
switch in acer-wmi driver.

Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.

Reference: bko#43007
        https://bugzilla.kernel.org/show_bug.cgi?id=43007Tested-by: NColin <colin.newell@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Found another Lenovo ideapad S205 the product name is 10382JG, it has
a 0x78 EC register exposes the state of wifi hardware switch on the machine.

So, add this patch to support Lenovo ideapad S205-10382JG wifi hardware
switch in acer-wmi driver.

Evidently the Ideapad S205 is just a model name on the market, but they have
totally different product name in DMI table.

Reference: bko#43007
        https://bugzilla.kernel.org/show_bug.cgi?id=43007Tested-by: NIvo Anjo <knuckles@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Fill up all the video switch keys in the map.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

For machines with AMD graphic chips, it will send out WMI event and ACPI
interrupt at the same time while hitting the hotkey. BIOS will notify the
system the next display output mode throught WMI event code, so that
windows' application can show an OSD to tell the user which mode will be
taken effect. User can hit the display toggle key many times within 2
seconds to choose the mode they want. After 2 seconds, WMI dirver should
send a WMIMethod(SDSP) command to tell the BIOS which mode the user chose.
And then BIOS will raise another ACPI interrupt to tell the system to
really switch the display mode.

In Linux desktop, we don't have this kind of OSD to let users to choose
the mode they want, so we don't need to call WMIMethod(SDSP) to have
another ACPI interrupt. To simplify the problem, we just have to ignore
the WMI event, and let the first ACPI interrupt to send out the key event.

For the need, here comes another quirk to add machines with this kind of
behavior. When the WMI driver receives the display toggle WMI event, and
found the machin is in the list, it will do nothing and let ACPI video
driver to report the key event.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Fill up all the video switch keys in the map.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

0x60 is touchpad enable key, but is misdefined in the keymap.
Signed-off-by: NAceLan Kao <acelan.kao@canonical.com>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Maybe this should be shared in another module...
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Add MSI Wind support to msi-wmi driver. MSI Wind has different GUID for
key events, different WMI key scan codes, it does not need filtering
consecutive identical events and it does not support backlight control
via MSIWMI_BIOS_GUID WMI. Tested on MSI Wind U100.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Introduced quirk_last_pressed variable that would indicate if
last_pressed is used or not. Also converted last_pressed to simple
variable in order to allow keymap to be non-contiguous.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Introduced function msi_wmi_backlight_setup() that initializes backlight
device. Made driver load and work if only one WMI (only for hotkeys or
only for backlight) is present.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>