No need to call into xfs_getattr and put a big bhv_vattr_t on the stack
just to get a little information from the XFS inode.

Add a helper called xfs_ioc_fsgetxattr instead that deals with retrieving
the information in a clean way.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29780a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

In the following scenario xfs_bulkstat() returns incorrect stale inode
state:

1. File_A is created and its inode synced to disk. 2. File_A is unlinked
and doesn't exist anymore. 3. Filesystem sync is invoked. 4. File_B is
created. File_B happens to reclaim File_A's inode. 5. xfs_bulkstat() is
called and detects File_B but reports the

incorrect File_A inode state.

Explanation for the incorrect inode state is that inodes are not
immediately synced on file create for performance reasons. This leaves the
on-disk inode buffer uninitialized (or with old state from a previous
generation inode) and this is what xfs_bulkstat() would report.

The patch marks the on-disk inode buffer "dirty" on unlink. When the inode
is reclaimed (by a new file create), xfs_bulkstat() would filter this
inode by the "dirty" mark. Once the inode is flushed to disk, the on-disk
buffer "dirty" mark is automatically removed and a following
xfs_bulkstat() would return the correct inode state.

Marking the on-disk inode buffer "dirty" on unlink is achieved by setting
the on-disk di_nlink field to 0. Note that the in-core di_nlink has
already been set to 0 and a corresponding transaction logged by
xfs_droplink(). This is an exception from the rule that any on-disk inode
buffer changes has to be followed by a disk write (inode flush).
Synchronizing the in-core to on-disk di_nlink values in advance (before
the actual inode flush to disk) should be fine in this case because the
inode is already unlinked and it would never change its di_nlink again for
this inode generation.

SGI-PV: 970842
SGI-Modid: xfs-linux-melb:xfs-kern:29757a
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29705a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Fix for a regression caused by a recent patch
that moved the DMAPI mount option processing inside xfs_parseargs(). The
DMAPI mount option used to be processed in the DMAPI module loaded before
xfs_parseargs() was invoked.

SGI-PV: 970451
SGI-Modid: xfs-linux-melb:xfs-kern:29683a
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Synchronous writes currently log inode changes before syncing pages to
disk. Since the file size is updated on I/O completion we wont be writing
out the updated file size and if we crash the file will have the wrong
size. This change moves the logging after the syncing of the pages to
ensure we log the correct file size.

SGI-PV: 970334
SGI-Modid: xfs-linux-melb:xfs-kern:29649a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>

m_growlock only needs plain binary mutex semantics, so use a struct mutex
instead of a semaphore for it.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29512a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

... or in the case of XLOG_TIC_ADD_OPHDR remove a useless macro entirely.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29511a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Now that struct bhv_vfs doesn't have any members left we can kill it and
go directly from the super_block to the xfs_mount everywhere.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29509a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29508a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

vfs_altfsid was just a pointer to mp->m_fixedfsid so we can trivially
replace it with the latter. vfs_fsid also was identical to m_fixedfsid
through rather obfuscated ways so we can kill it as well and simply its
only user.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29506a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Also remove the now dead behavior code.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29505a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

All vfs ops now take struct xfs_mount pointers and the behaviour related
glue is split out into methods of its own.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29504a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Mount options are now parsed by the main XFS module and rejected if quota
support is not available, and there are some new quota operation for the
quotactl syscall and calls to quote in the mount, unmount and sync
callchains.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29503a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Mount options are now parsed by the main XFS module and rejected if dmapi
support is not available, and there is a new dm operation to send the
mount event.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29502a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

In the next patch we need to look at the mount structure until just before
it's freed, so we need to be able to free it as the very last thing in
xfs_unmount.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29501a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t
as a typedef for struct inode for the time being until all the fallout is
cleaned up.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29500a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

It's entirely unused except for ignored arguments in the mrlock
initialization, so remove it.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29499a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29496a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

All flags previously handled at the vnode level are not in the xfs_inode
where we already have a flags mechanisms and free bits for flags
previously in the vnode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29495a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

We can easily get at the vfsp through the super_block but it will soon be
gone anyway.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29494a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29493a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

All vnode ops now take struct xfs_inode pointers and the behaviour related
glue is split out into methods of it's own. This required fixing
xfs_create/mkdir/symlink to not mess with the inode pointer but rather use
a separate boolean for error handling. Thanks to Dave Chinner for that
fix.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29492a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

XFS inodes are dynamically allocated on demand, rather than being
allocated at mkfs time. Chunks of 64 inodes are allocated at once, but
they are never freed. Over time, this can lead to filesystem
fragmentation, clusters of inodes and the btrees which point at them can
be scattered around the system.

By freeing clusters as they are emptied, we will reduce fragmentation of
the free space after removing files. This in turn will allow us to make
better placement decisions when repopulating a filesystem. The
XFSMNT_IDELETE mount option enables freeing clusters when they get empty.

Unfortunately a side effect of freeing inode clusters is that the inode
generation numbers of such inodes would be reset to zero when the cluster
is reclaimed. This is a problem in particular for a DMAPI enabled
filesystem as the the DMAPI handles need to be unique and persistent in
time. An unique DMAPI handle is built with the help of the inode
generation number. When the last one is prematurely reset by an inode
cluster reclaim, there is a high probability of different generation
inodes to end up having identical DMAPI handles.

To avoid the problem with identical DMAPI handles, the XFSMNT_IDELETE
mount option should be set as default, only if the filesystem is not
mounted with XFSMNT_DMAPI.

SGI-PV: 969192
SGI-Modid: xfs-linux-melb:xfs-kern:29486a
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.

As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.

A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.

The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....

SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Kill uio related functions and defines now that they're unused.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29480a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Simplify the readlink code to get rid of the last user of uio.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29479a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Currently xfs has a rather complicated internal scheme to allow for
different directory formats in IRIX. This patch rips all code related to
this out and pushes useage of the Linux filldir callback into the lowlevel
directory code. This does not make the code any less portable because
filldir can be used to create dirents of all possible variations
(including the IRIX ones as proved by the IRIX binary emulation code under
arch/mips/).

This patch get rid of an unessecary copy in the readdir path, about 400
lines of code and one of the last two users of the uio structure.

This version is updated to deal with dmapi aswell which greatly simplifies
the get_dirattrs code. The dmapi part has been tested using the
get_dirattrs tools from the xfstest dmapi suite1 with various small and
large directories.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29478a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the
incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the
incore -> disk conversion. A new helper xfs_sb_from_disk handles the other
direction and doesn't need the slightly hacky table-driven approach
because we only ever read the full sb from disk.

The handling of shared r/o filesystems has been buggy on little endian
system and fixing this required shuffling around of some code in that
area.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29477a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.

As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

In sgi mod# xfs-linux-melb:xfs-kern:29319a, the variable renaming was not
complete and variable 'b' was left unchanged for non-lbd 32 bit machines.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29469a
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 969372
SGI-Modid: xfs-linux-melb:xfs-kern:29444a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

SGI-PV: 968690
SGI-Modid: xfs-linux-melb:xfs-kern:29340a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NVlad Apostolov <vapo@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

If we fail to open the the log device buftarg, we can fall through to
error handling code that fails to check for a NULL log device buftarg
before calling xfs_free_buftarg().

This patch fixes the issue by checking mp->m_logdev_targp against NULL in
xfs_unmountfs_close() and doing the proper xfs_blkdev_put(logdev); and
xfs_blkdev_put(rtdev); on (!mp->m_rtdev_targp) in xfs_mount().

Discovered by the Coverity checker.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29328a
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

xfs_start_flags can make use of is_power_of_2 to tidy up the test a little
bit.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29327a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Generally we try not to directly include linux header files in core xfs
code; xfs_linux.h is the spot for that.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29326a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Now that nobody's using it, remove xfs_physmem & friends.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29325a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Remove scaling of inode "clusters" based on machine memory; small cluster
cut-point was an unrealistic 32MB and was probably never tested.

Removes another user of xfs_physmem.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29324a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>