Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Exposes the same connector properties as the Radeon implementation, however
their behaviour isn't exactly the same.  The primary difference being that
unless both hborder/vborder have been defined by the user, the driver will
keep the aspect ratio of the overscanned area the same as the mode the
display is programmed for.

Enabled for digital outputs on GeForce 8 and up, excluding GF119.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Ported from the equivalent fix in drm-intel-next:

http://cgit.freedesktop.org/~keithp/linux/commit/?h=drm-intel-next&id=cd9dde44f47501394b9f0715b6a36a92aa74c0d0Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I'm sure that out there somewhere, someone will need this.  We currently
haven't seen an example of LVDS being on a non-0 SOR so far though.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

If we support PGPIO interrupts, and know a hotplug GPIO tag for a
connector we use HPD, otherwise POLL_CONNECT.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

If the connector table is lying, which it often does on the boards of a
particular manufacturer, we may end up doing the wrong thing.  Listen
to the encoder table instead, it's more reliable.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

After looking at a number of different logs, it appears 0x41 likely
indicates the presense of an LVDS panel following the SPWG spec
(http://www.spwg.org/)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We may eventually end up with per-connector backlights, especially with
ddcci devices.  Make sure that the parent node for the backlight device is
the connector rather than the PCI device.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NSedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The DRM core fills this value, but at too late a stage for this to work,
possibly resulting in an undesirable mode being selected.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allows callers to install their own handlers for when a GPIO line
changes state (such as for hotplug detect).

This also fixes a bug where we weren't acknowledging the GPIO IRQ
until after the bottom half had run, causing a severe IRQ storm
in some cases.
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Analog output polling makes GL programs jerky when pageflip is being
used because it's carried out with the mode_config mutex held.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NXavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NGrzesiek Sójka <pld@pfu.pl>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This should fix eDP on certain laptops with 18-bit panels, we were rejecting
the panel's native mode due to thinking there was insufficient bandwidth
for it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

More Apple brain damage, it fixes the modesetting failure on an eMac
G4 (fdo bug 29810).
Reported-by: NZoltan Varnagy <doi@freemail.hu>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Destructive load-detection is very expensive and due to failings
elsewhere can trigger system wide stalls of up to 600ms. A simple
first step to correcting this is not to invoke such an expensive
and destructive load-detection operation automatically.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

sil164 and friends are the most common, usually they just need to be
poked once because a fixed configuration is enough for any modes and
clocks, so they worked without this patch if the BIOS had done a good
job on POST. Display couldn't survive a suspend/resume cycle though.
Unfortunately, BIOS scripts are useless here.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Locking only makes sense in the VBIOS parsing code as it's executed
before CRTC init.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Clean up and move the external TV encoder detection code to
nouveau_i2c.c, it's also going to be useful for external TMDS and DDC
detection.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Rescaling interlaced modes isn't going to work correctly, and even if
it did, come on, interlaced flat panels? are you pulling my leg?
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Based on a patch from Matthew Garrett.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Load detection needs the connector wired to a CRTC, when there are no
inactive CRTCs left that means we need to cut some other head off for
a while, causing intermittent flickering.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Create connectors before encoders to avoid having to do another loop across
encoder list whenever we create a new connector.  This allows us to pass
the connector to the encoder creation functions, and avoid using a
create_resources() callback since we can now call it directly.

This can also potentially modify the connector ordering on nv50.  On cards
where the DCB connector and encoder tables are in the same order, things
will be unchanged.  However, there's some cards where the ordering between
the tables differ, and in one case, leads us to naming the connectors
"wrongly".
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fixes oops in nouveau_connector_get_modes with nv_encoder is NULL
Signed-off-by: NAlbert Damen <albrt@gmx.net>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

a7b9f9e5adef dropped it by accident.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NThibaut Girka <thib@sitedethib.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

When selecting the native mode for a display we weren't taking into account
whether or not it was actually supported on that particular output.

This patch modifies our native mode selection to run all modes through
mode_valid() first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>