- 03 3月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch fixes performance regression of dbench reported by Alex <hbx7d@yandex.com>. This issue was revealed by Phoronix tests results: http://www.phoronix.com/scan.php?page=article&item=linux_314_ssdfs&num=2 It turns out that we need to assign WRITE_SYNC to the node writes, if fsync is triggered. The performance numbers are like below, which is measured by Alex. 1. 355MB/s ext4 2. 225MB/s f2fs : WRITE for node writes 3. 525MB/s f2fs : WRITE_SYNC for node writes Reported-And-Tested-by: Alex <hbx7d@yandex.com>. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 28 2月, 2014 1 次提交
-
-
由 Chao Yu 提交于
We should de-account dirty counters for page when redirty in ->writepage(). Wu Fengguang described in 'commit 971767ca': "writeback: fix dirtied pages accounting on redirty De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints)." Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 27 2月, 2014 5 次提交
-
-
由 Chao Yu 提交于
This patch use existing macro F2FS_INODE/NEXT_FREE_BLKADDR to clean up some codes. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
If there are multi segments in one section, we will read those SSA blocks which have contiguous address one by one in f2fs_gc. It may lost performance, let's read ahead SSA blocks by merge multi read request. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch adds an sysfs entry to control dir_level used by the large directory. The description of this entry is: dir_level This parameter controls the directory level to support large directory. If a directory has a number of files, it can reduce the file lookup latency by increasing this dir_level value. Otherwise, it needs to decrease this value to reduce the space overhead. The default value is 0. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch introduces an i_dir_level field to support large directory. Previously, f2fs maintains multi-level hash tables to find a dentry quickly from a bunch of chiild dentries in a directory, and the hash tables consist of the following tree structure as below. In Documentation/filesystems/f2fs.txt, ---------------------- A : bucket B : block N : MAX_DIR_HASH_DEPTH ---------------------- level #0 | A(2B) | level #1 | A(2B) - A(2B) | level #2 | A(2B) - A(2B) - A(2B) - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) But, if we can guess that a directory will handle a number of child files, we don't need to traverse the tree from level #0 to #N all the time. Since the lower level tables contain relatively small number of dentries, the miss ratio of the target dentry is likely to be high. In order to avoid that, we can configure the hash tables sparsely from level #0 like this. level #0 | A(2B) - A(2B) - A(2B) - A(2B) level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) With this structure, we can skip the ineffective tree searches in lower level hash tables. This patch adds just a facility for this by introducing i_dir_level in f2fs_inode. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
It turns out that a bit operation like find_next_bit is not always fast enough for f2fs_find_entry. Instead, it is pretty much simple and fast to traverse each dentries. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 24 2月, 2014 6 次提交
-
-
由 Jaegeuk Kim 提交于
The stat_show is just to show the current status of f2fs. So, we can remove all the there-in locks. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch introduces a radix tree for the list of free_nids, which enhances the performance on free nid management. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Gu Zheng 提交于
Introduce help macro on_build_free_nids() which just uses build_lock to judge whether the building free nid is going, so that we can remove the on_build_free_nids field from f2fs_sb_info. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: remove an unnecessary white line removal] Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
The nat cache entry maintains a status whether it is checkpointed or not. So, if a new cache entry is loaded from the last checkpoint, nat_entry->checkpointed should be true. If the cache entry is modified as being dirty, nat_entry->checkpoint should be false. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
At the end of the recovery procedure, write_checkpoint is called and updates the cp count which is managed by f2fs stat. But, previously build_stat() is called after the recovery procedure, which results in: BUG: unable to handle kernel NULL pointer dereference at 000000000000012c IP: [<ffffffffa03b1030>] write_checkpoint+0x720/0xbc0 [f2fs] Call Trace: [<ffffffff810a6b44>] ? mark_held_locks+0x74/0x140 [<ffffffff8109a3e0>] ? __init_waitqueue_head+0x60/0x60 [<ffffffffa03bf036>] recover_fsync_data+0x656/0xf20 [f2fs] [<ffffffff812ee3eb>] ? security_d_instantiate+0x1b/0x30 [<ffffffffa03aeb4d>] f2fs_fill_super+0x94d/0xa00 [f2fs] [<ffffffff811a9825>] mount_bdev+0x1a5/0x1f0 [<ffffffff8114915e>] ? __get_free_pages+0xe/0x40 [<ffffffffa03ae200>] ? f2fs_remount+0x130/0x130 [f2fs] [<ffffffffa03aa575>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff811aa713>] mount_fs+0x43/0x1b0 [<ffffffff811c7124>] vfs_kern_mount+0x74/0x160 [<ffffffff811c5cb1>] ? __get_fs_type+0x51/0x60 [<ffffffff811c9727>] do_mount+0x237/0xb50 [<ffffffff811c936a>] ? copy_mount_options+0x3a/0x170 So, this patche changes the order of recovery_fsync_data() and f2fs_build_stats(). Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
Even if f2fs_write_data_page is called by the page reclaiming path, we should not write the page to provide enough free segments for the worst case scenario. Otherwise, f2fs can face with no free segment while gc is conducted, resulting in: ------------[ cut here ]------------ kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/segment.c:565! RIP: 0010:[<ffffffffa02c3b11>] [<ffffffffa02c3b11>] new_curseg+0x331/0x340 [f2fs] Call Trace: allocate_segment_by_default+0x204/0x280 [f2fs] allocate_data_block+0x108/0x210 [f2fs] write_data_page+0x8a/0xc0 [f2fs] do_write_data_page+0xe1/0x2a0 [f2fs] move_data_page+0x8a/0xf0 [f2fs] f2fs_gc+0x446/0x970 [f2fs] f2fs_balance_fs+0xb6/0xd0 [f2fs] f2fs_write_begin+0x50/0x350 [f2fs] ? unlock_page+0x27/0x30 ? unlock_page+0x27/0x30 generic_file_buffered_write+0x10a/0x280 ? file_update_time+0xa3/0xf0 __generic_file_aio_write+0x1c8/0x3d0 ? generic_file_aio_write+0x52/0xb0 ? generic_file_aio_write+0x52/0xb0 generic_file_aio_write+0x65/0xb0 do_sync_write+0x5a/0x90 vfs_write+0xc5/0x1f0 SyS_write+0x55/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 17 2月, 2014 17 次提交
-
-
由 Jaegeuk Kim 提交于
Total nids that f2fs can use should not include 0, nid for node inode, and nid for meta inode. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Changman Lee 提交于
This patch shows the counts of checkpoint in f2fs' status. Signed-off-by: NChangman Lee <cm224.lee@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages function into ra_meta_pages. Additionally the new function is used to readahead cp block in recover_orphan_inodes. Change log from v1: o fix a deadloop bug pointed by Jaegeuk Kim. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
Previously without protection of inode mutex, f2fs_falloc and other data correlated operations will interfere with each other. So let's use inode mutex to keep atomicity of f2fs_falloc. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch integrates inode_[inc|dec]_dirty_dents with inc_page_count to remove redundant calls. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
If f2fs entered errorneous checkpoint status, it should skip writing meta pages instead of redirtying the pages out. Otherwise, it cannot unmount the partition even though f2fs is under read-only status. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
When a new directory is allocated, if an error is occurred, we should truncate preallocated dentry pages too. This bug was reported by Andrey Tsyvarev after a while as follows. mkdir()-> f2fs_add_link()-> init_inode_metadata()-> f2fs_init_acl()-> f2fs_get_acl()-> f2fs_getxattr()-> read_all_xattrs() fails. Also there was a BUG_ON triggered after the fault in mkdir()-> f2fs_add_link()-> init_inode_metadata()-> remove_inode_page() -> f2fs_bug_on(inode->i_blocks != 0 && inode->i_blocks != 1); But, previous patch wasn't perfect to resolve that bug, so the following bug report was also submitted. kernel BUG at fs/f2fs/inode.c:274! Call Trace: [<ffffffff811fde03>] evict+0xa3/0x1a0 [<ffffffff811fe615>] iput+0xf5/0x180 [<ffffffffa01c7f63>] f2fs_mkdir+0xf3/0x150 [f2fs] [<ffffffff811f2a77>] vfs_mkdir+0xb7/0x160 [<ffffffff811f36bf>] SyS_mkdir+0x5f/0xc0 [<ffffffff81680769>] system_call_fastpath+0x16/0x1b Finally, this patch resolves all the issues like below. If an error is occurred after make_empty_dir(), 1. truncate_inode_pages() The make_bad_inode() prior to iput() will change i_mode to S_IFREG, which means that f2fs will not decrement fi->dirty_dents during f2fs_evict_inode. But, by calling it here, we can do that. 2. truncate_blocks() Preallocated dentry pages are trucated here to sync i_blocks. 3. remove_dirty_dir_inode() Remove this directory inode from the list. Reported-and-Tested-by: NAndrey Tsyvarev <tsyvarev@ispras.ru> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch modifies flow a little bit to avoid the following build warnings. src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’: src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may be used uninitialized in this function [-Wmaybe-uninitialized] src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch adds GET_BLKOFF_FROM_SEG0 to clean up some codes. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This is the erroneous scenario. i_size on-disk i_size i_blocks __f2fs_add_link() 4096 4096 2 get_new_data_page 8192 4096 3 -ENOSPC = init_inode_metadata checkpoint - 4096 3 POR and reboot __f2fs_add_link() 4096 4096 3 page = get_new_data_page (page->index = 1 by NEW_ADDR) add a dentry to the page successfully f2fs_rmdir() f2fs_empty_dir() 4096 4096 3 f2fs_unlink() goes, since there is no valid dentry due to i_size = 4096. But, still there is one dentry in page->index = 1. So this patch moves the code to write dir->i_size into on-disk i_size in order to sync dir's i_size, on-disk i_size, and its i_blocks. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch modifies the use of bi_private to remove pointer chasing for sbi. Previously, we had a bi_private structure, but it needs memory allocation. So this patch uses bi_private by the sbi pointer and adds a completion pointer into the sbi. This can achieve no memory allocation and nice use of the bi_private. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
If a new xattr node page was allocated and its inode is fsynced, we should recover the xattr node page during the roll-forward process after power-cut. But, previously, f2fs didn't handle that case, resulting in kernel panic as follows reported by Tom Li. BUG: unable to handle kernel paging request at ffffc9001c861a98 IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs] Call Trace: [<ffffffff815ece9b>] ? printk+0x48/0x4a [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs] [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs] [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs] [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs] [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120 [<ffffffff811497b9>] do_mount+0x259/0xa90 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b This patch adds a recovery function of xattr node pages. Reported-by: NTom Li <biergaizi@members.fsf.org> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch cleans up the refresh_sit_entry to handle locate_dirty_segments. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
In order to make fs consistency, update_inode_page should not be failed all the time. Otherwise, it is possible to lose some metadata in the inode like a link count. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "We have a small collection of fixes in my for-linus branch. The big thing that stands out is a revert of a new ioctl. Users haven't shipped yet in btrfs-progs, and Dave Sterba found a better way to export the information" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: use right clone root offset for compressed extents btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105 Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol Btrfs: fix max_inline mount option Btrfs: fix a lockdep warning when cleaning up aborted transaction Revert "btrfs: add ioctl to export size of global metadata reservation"
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull devicetree fixes from Rob Herring: "Fix booting on PPC boards. Changes to of_match_node matching caused the serial port on some PPC boards to stop working. Reverted the change and reimplement to split matching between new style compatible only matching and fallback to old matching algorithm" * tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: search the best compatible match first in __of_match_node() Revert "OF: base: match each node compatible against all given matches first"
-
- 16 2月, 2014 10 次提交
-
-
由 Kevin Hao 提交于
Currently, of_match_node compares each given match against all node's compatible strings with of_device_is_compatible. To achieve multiple compatible strings per node with ordering from specific to generic, this requires given matches to be ordered from specific to generic. For most of the drivers this is not true and also an alphabetical ordering is more sane there. Therefore, this patch introduces a function to match each of the node's compatible strings against all given compatible matches without type and name first, before checking the next compatible string. This implies that node's compatibles are ordered from specific to generic while given matches can be in any order. If we fail to find such a match entry, then fall-back to the old method in order to keep compatibility. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: NKevin Hao <haokexin@gmail.com> Tested-by: NStephen Chivers <schivers@csc.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time to v3.14-rc1 related changes. Also included is one fix for a free after use regression in persistent reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix protection copy routine IB/srpt: replace strict_strtoul() with kstrtoul() target: Simplify command completion by removing CMD_T_FAILED flag iser-target: Fix leak on failure in isert_conn_create_fastreg_pool iscsi-target: Fix SNACK Type 1 + BegRun=0 handling target: Fix missing length check in spc_emulate_evpd_83() qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div target: Fix free-after-use regression in PR unregister
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "i2c has a bugfix and documentation improvements for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Documentation: i2c: mention ACPI method for instantiating devices Documentation: i2c: describe devicetree method for instantiating devices i2c: mv64xxx: refactor message start to ensure proper initialization
-
由 Linus Torvalds 提交于
Merge branches 'irq-urgent-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "Fix from the urgent branch: a trivial oneliner adding the missing Kconfig dependency curing build failures which have been discovered by several build robots. The update in the irq-core branch provides a new function in the irq/devres code, which is a prerequisite for driver developers to get rid of boilerplate code all over the place. Not a bugfix, but it has zero impact on the current kernel due to the lack of users. It's simpler to provide the infrastructure to interested parties via your tree than fulfilling the wishlist of driver maintainers on which particular commit or tag this should be based on" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Add devm_request_any_context_irq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "The following trilogy of patches brings you: - fix for a long standing math overflow issue with HZ < 60 - an onliner fix for a corner case in the dreaded tick broadcast mechanism affecting a certain range of AMD machines which are infested with the infamous automagic C1E power control misfeature - a fix for one of the ARM platforms which allows the kernel to proceed and boot instead of stupidly panicing for no good reason. The patch is slightly larger than necessary, but it's less ugly than the alternative 5 liner" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Clear broadcast pending bit when switching to oneshot clocksource: Kona: Print warning rather than panic time: Fix overflow when HZ is smaller than 60
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull twi tracing fixes from Steven Rostedt: "Two urgent fixes in the tracing utility. The first is a fix for the way the ring buffer stores timestamps. After a restructure of the code was done, the ring buffer timestamp logic missed the fact that the first event on a sub buffer is to have a zero delta, as the full timestamp is stored on the sub buffer itself. But because the delta was not cleared to zero, the timestamp for that event will be calculated as the real timestamp + the delta from the last timestamp. This can skew the timestamps of the events and have them say they happened when they didn't really happen. That's bad. The second fix is for modifying the function graph caller site. When the stop machine was removed from updating the function tracing code, it missed updating the function graph call site location. It is still modified as if it is being done via stop machine. But it's not. This can lead to a GPF and kernel crash if the function graph call site happens to lie between cache lines and one CPU is executing it while another CPU is doing the update. It would be a very hard condition to hit, but the result is severe enough to have it fixed ASAP" * tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/x86: Use breakpoints for converting function graph caller ring-buffer: Fix first commit on sub-buffer having non-zero delta
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 EFI fixes from Peter Anvin: "A few more EFI-related fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Check status field to validate BGRT header x86/efi: Fix 32-bit fallout
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Kevin Hilman: "A collection of ARM SoC fixes for v3.14-rc1. Mostly a collection of Kconfig, device tree data and compilation fixes along with fix to drivers/phy that fixes a boot regression on some Marvell mvebu platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dma: mv_xor: Silence a bunch of LPAE-related warnings ARM: ux500: disable msp2 device tree node ARM: zynq: Reserve not DMAable space in front of the kernel ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX ARM: imx6: Initialize low-power mode early again ARM: pxa: fix various compilation problems ARM: pxa: fix compilation problem on AM300EPD board ARM: at91: add Atmel's SAMA5D3 Xplained board spi/atmel: document clock properties mmc: atmel-mci: document clock properties ARM: at91: enable USB host on at91sam9n12ek board ARM: at91/dt: fix sama5d3 ohci hclk clock reference ARM: at91/dt: sam9263: fix compatibility string for the I2C ata: sata_mv: Fix probe failures with optional phys drivers: phy: Add support for optional phys drivers: phy: Make NULL a valid phy reference ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile ARM: moxart: move DMA_OF selection to driver ARM: hisi: fix kconfig warning on HAVE_ARM_TWD
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Acked-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-