Compiler does not really know that skb_shinfo(to|from) are constants
in skb_try_coalesce(), lets cache their values to shrink code.

We might even take care of skb_zcopy() calls later.

$ size net/core/skbuff.o.before net/core/skbuff.o
   text	   data	    bss	    dec	    hex	filename
  40727	   1298	      0	  42025	   a429	net/core/skbuff.o.before
  40631	   1298	      0	  41929	   a3c9	net/core/skbuff.o
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

to make sure this is serialized correctly.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

switch the only caller to rtnl_af_unregister.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

no users in the tree.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The functions t4vf_link_down_rc_str and t4vf_handle_get_port_info are
local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 't4vf_link_down_rc_str' was not declared. Should it be static?
symbol 't4vf_handle_get_port_info' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/core/dev.c:1306: warning: No description found for parameter 'name'
net/core/dev.c:1306: warning: Excess function parameter 'alias' description in 'dev_get_alias'

Fixes: 6c557001 ("net: core: decouple ifalias get/set from rtnl lock")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for RX checksum offload. This is enabled by default and
may be disabled and re-enabled using ethtool:

 # ethtool -K eth0 rx off
 # ethtool -K eth0 rx on

The RAVB provides a simple checksumming scheme which appears to be
completely compatible with CHECKSUM_COMPLETE: sum of all packet data after
the L2 header is appended to packet data; this may be trivially read by the
driver and used to update the skb accordingly.

In terms of performance throughput is close to gigabit line-rate both with
and without RX checksum offload enabled. Perf output, however, appears to
indicate that significantly less time is spent in do_csum(). This is as
expected.

Test results with RX checksum offload enabled:
 # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162
 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo
 enable_enobufs failed: getprotobyname
 Recv   Send    Send
 Socket Socket  Message  Elapsed
 Size   Size    Size     Time     Throughput
 bytes  bytes   bytes    secs.    10^6bits/sec

  87380  16384  16384    10.00     937.54

 Summary of output of perf report:
    18.28%      ksoftirqd/0  [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
    10.34%      ksoftirqd/0  [kernel.kallsyms]  [k] __pi_memcpy
     9.83%      ksoftirqd/0  [kernel.kallsyms]  [k] ravb_poll
     7.89%      ksoftirqd/0  [kernel.kallsyms]  [k] skb_put
     4.01%      ksoftirqd/0  [kernel.kallsyms]  [k] dev_gro_receive
     3.37%          netperf  [kernel.kallsyms]  [k] __arch_copy_to_user
     3.17%          swapper  [kernel.kallsyms]  [k] arch_cpu_idle
     2.55%          swapper  [kernel.kallsyms]  [k] tick_nohz_idle_enter
     2.04%      ksoftirqd/0  [kernel.kallsyms]  [k] __pi___inval_dcache_area
     2.03%          swapper  [kernel.kallsyms]  [k] _raw_spin_unlock_irq
     1.96%      ksoftirqd/0  [kernel.kallsyms]  [k] __netdev_alloc_skb
     1.59%      ksoftirqd/0  [kernel.kallsyms]  [k] __slab_alloc.isra.83

Test results without RX checksum offload enabled:
 # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162
 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo
 enable_enobufs failed: getprotobyname
 Recv   Send    Send
 Socket Socket  Message  Elapsed
 Size   Size    Size     Time     Throughput
 bytes  bytes   bytes    secs.    10^6bits/sec

  87380  16384  16384    10.00     940.20

 Summary of output of perf report:
    17.10%    ksoftirqd/0  [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
    10.99%    ksoftirqd/0  [kernel.kallsyms]  [k] __pi_memcpy
     8.87%    ksoftirqd/0  [kernel.kallsyms]  [k] ravb_poll
     8.16%    ksoftirqd/0  [kernel.kallsyms]  [k] skb_put
     7.42%    ksoftirqd/0  [kernel.kallsyms]  [k] do_csum
     3.91%    ksoftirqd/0  [kernel.kallsyms]  [k] dev_gro_receive
     2.31%        swapper  [kernel.kallsyms]  [k] arch_cpu_idle
     2.16%    ksoftirqd/0  [kernel.kallsyms]  [k] __pi___inval_dcache_area
     2.14%    ksoftirqd/0  [kernel.kallsyms]  [k] __netdev_alloc_skb
     1.93%        netperf  [kernel.kallsyms]  [k] __arch_copy_to_user
     1.79%        swapper  [kernel.kallsyms]  [k] tick_nohz_idle_enter
     1.63%    ksoftirqd/0  [kernel.kallsyms]  [k] __slab_alloc.isra.83

Above results collected on an R-Car Gen 3 Salvator-X/r8a7796 ES1.0.
Also tested on a R-Car Gen 3 Salvator-X/r8a7795 ES1.0.

By inspection this also appears to be compatible with the ravb found
on R-Car Gen 2 SoCs, however, this patch is currently untested on such
hardware.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 0x6085 T6 device id.
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marcelo Ricardo Leitner says:

====================
Introduce SCTP Stream Schedulers

This patchset introduces the SCTP Stream Schedulers are defined by
https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13

It provides 3 schedulers at the moment: FCFS, Priority and Round Robin.
The other 3, Round Robin per packet, Fair Capacity and Weighted Fair
Capacity will be added later. More specifically, WFQ is required by
WebRTC Datachannels.

The draft also defines the idata chunk, allowing a usermsg to be
interrupted by another piece of idata from another stream. This patchset
*doesn't* include it. It will be posted later by Xin Long.  Its
integration with this patchset is very simple and it basically only
requires a tweak in sctp_sched_dequeue_done(), to ignore datamsg
boundaries.

The first 5 patches are a preparation for the next ones. The most
relevant patches are the 4th and 6th ones. More details are available on
each patch.

v2: changelog update on patch 3
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces RFC Draft ndata section 3.2 Priority Based
Scheduler (SCTP_SS_RR).

Works by maintaining a list of enqueued streams and tracking the last
one used to send data. When the datamsg is done, it switches to the next
stream.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces RFC Draft ndata section 3.4 Priority Based
Scheduler (SCTP_SS_PRIO).

It works by having a struct sctp_stream_priority for each priority
configured. This struct is then enlisted on a queue ordered per priority
if, and only if, there is a stream with data queued, so that dequeueing
is very straightforward: either finish current datamsg or simply dequeue
from the highest priority queued, which is the next stream pointed, and
that's it.

If there are multiple streams assigned with the same priority and with
data queued, it will do round robin amongst them while respecting
datamsgs boundaries (when not using idata chunks), to be reasonably
fair.

We intentionally don't maintain a list of priorities nor a list of all
streams with the same priority to save memory. The first would mean at
least 2 other pointers per priority (which, for 1000 priorities, that
can mean 16kB) and the second would also mean 2 other pointers but per
stream. As SCTP supports up to 65535 streams on a given asoc, that's
1MB. This impacts when giving a priority to some stream, as we have to
find out if the new priority is already being used and if we can free
the old one, and also when tearing down.

The new fields in struct sctp_stream_out_ext and sctp_stream are added
under a union because that memory is to be shared with other schedulers.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As defined per RFC Draft ndata Section 4.3.3, named as
SCTP_STREAM_SCHEDULER_VALUE.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As defined per RFC Draft ndata Section 4.3.2, named as
SCTP_STREAM_SCHEDULER.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces the hooks necessary to do stream scheduling, as
per RFC Draft ndata.  It also introduces the first scheduler, which is
what we do today but now factored out: first come first served (FCFS).

With stream scheduling now we have to track which chunk was enqueued on
which stream and be able to select another other than the in front of
the main outqueue. So we introduce a list on sctp_stream_out_ext
structure for this purpose.

We reuse sctp_chunk->transmitted_list space for the list above, as the
chunk cannot belong to the two lists at the same time. By using the
union in there, we can have distinct names for these moments.

sctp_sched_ops are the operations expected to be implemented by each
scheduler. The dequeueing is a bit particular to this implementation but
it is to match how we dequeue packets today. We first dequeue and then
check if it fits the packet and if not, we requeue it at head. Thus why
we don't have a peek operation but have dequeue_done instead, which is
called once the chunk can be safely considered as transmitted.

The check removed from sctp_outq_flush is now performed by
sctp_stream_outq_migrate, which is only called during assoc setup.
(sctp_sendmsg() also checks for it)

The only operation that is foreseen but not yet added here is a way to
signalize that a new packet is starting or that the packet is done, for
round robin scheduler per packet, but is intentionally left to the
patch that actually implements it.

Support for I-DATA chunks, also described in this RFC, with user message
interleaving is straightforward as it just requires the schedulers to
probe for the feature and ignore datamsg boundaries when dequeueing.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a helper to fetch the stream number from a given chunk.
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the stream schedulers, sctp_stream_out will become too big to be
allocated by kmalloc and as we need to allocate with BH disabled, we
cannot use __vmalloc in sctp_stream_init().

This patch moves out the stats from sctp_stream_out to
sctp_stream_out_ext, which will be allocated only when the application
tries to sendmsg something on it.

Just the introduction of sctp_stream_out_ext would already fix the issue
described above by splitting the allocation in two. Moving the stats
to it also reduces the pressure on the allocator as we will ask for less
memory atomically when creating the socket and we will use GFP_KERNEL
later.

Then, for stream schedulers, we will just use sctp_stream_out_ext.
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is 1 place allocating it and another reallocating. Move such
procedures to a common function.

v2: updated changelog
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is 1 place allocating it and 2 other reallocating. Move such
procedures to a common function.
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As SCTP supports up to 65535 streams, that can lead to very large
allocations in sctp_stream_init(). As Xin Long noticed, systems with
small amounts of memory are more prone to not have enough memory and
dump warnings on dmesg initiated by user actions. Thus, silence them.

Also, if the reallocation of stream->out is not necessary, skip it and
keep the memory we already have.
Reported-by: NXin Long <lucien.xin@gmail.com>
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2017-10-03

This series contains updates to fm10k only.

Jake provides majority of the changes in this series, starting with using
fm10k_prepare_for_reset() if we lose PCIe link.  Before we would detach
the device and close the netdev, which left a lot of items still active,
such as the Tx/Rx resources.  This could cause problems where register
reads would return potentially invalid values and would result in unknown
driver behavior, so call fm10k_prepare_for_reset() much like we do for
suspend/resume cycles.  This will attempt to shutdown as much as possible
to prevent possible issues.  Then replaced the PCI specific legacy power
management hooks with the new generic power management hooks for both
suspend and hibernate.  Introduced a workqueue item which monitors a
queue of MAC and VLAN requests since a large number of MAC address or
VLAN updates at once can overload the mailbox with too many messages at
once.  Fixed a cppcheck warning by properly declaring the min_rate and
max_rate variables in the declaration and definition for .ndo_set_vf_bw,
rather than using "unused" for the minimum rates.

Joe Perches fixes the backward logic when using net_ratelimit().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Device alias can be set by either rtnetlink (rtnl is held) or sysfs.

rtnetlink hold the rtnl mutex, sysfs acquires it for this purpose.
Add an extra mutex for it and use rcu to protect concurrent accesses.

This allows the sysfs path to not take rtnl and would later allow
to not hold it when dumping ifalias.

Based on suggestion from Eric Dumazet.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some NIC drivers don't have correct speed/duplex settings at the
time they send NETDEV_UP notification and that messes up the
bonding state. Especially 802.3ad mode which is very sensitive
to these settings. In the current implementation we invoke
bond_update_speed_duplex() when we receive NETDEV_UP, however,
ignore the return value. If the values we get are invalid
(UNKNOWN), then slave gets removed from the aggregator with
speed and duplex set to UNKNOWN while link is still marked as UP.

This patch fixes this scenario. Also 802.3ad mode is sensitive to
these conditions while other modes are not, so making sure that it
doesn't change the behavior for other modes.
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We accidentally return success if the kmalloc_array() call fails.

Fixes: 0e14c777 ("mlxsw: spectrum: Add the multicast routing hardware logic")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NYotam Gigi <yotamg@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlxsw_afa_block_create() doesn't return error pointers, it returns NULL
on error.

Fixes: 0e14c777 ("mlxsw: spectrum: Add the multicast routing hardware logic")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NYotam Gigi <yotamg@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function mt7530_phy_write is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warnings:
symbol 'mt7530_phy_write' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The functions lan9303_mdio_phy_write and lan9303_mdio_phy_read are local
to the source and do not need to be in global scope, so make them static.

Cleans up sparse warnings:
symbol 'lan9303_mdio_phy_write' was not declared. Should it be static?
symbol 'lan9303_mdio_phy_read' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Add support for partial multicast route offload

Yotam says:

Previous patchset introduced support for offloading multicast MFC routes to
the Spectrum hardware. As described in that patchset, no partial offloading
is supported, i.e if a route has one output interface which is not a valid
offloadable device (e.g. pimreg device, dummy device, management NIC), the
route is trapped to the CPU and the forwarding is done in slow-path.

Add support for partial offloading of multicast routes, by letting the
hardware to forward the packet to all the in-hardware devices, while the
kernel ipmr module will continue forwarding to all other interfaces.

Similarly to the bridge, the kernel ipmr module will forward a marked
packet to an interface only if the interface has a different parent ID than
the packet's ingress interfaces.

The first patch introduces the offload_mr_fwd_mark skb field, which can be
used by offloading drivers to indicate that a packet had already gone
through multicast forwarding in hardware, similarly to the offload_fwd_mark
field that indicates that a packet had already gone through L2 forwarding
in hardware.

Patches 2 and 3 change the ipmr module to not forward packets that had
already been forwarded by the hardware, i.e. packets that are marked with
offload_mr_fwd_mark and the ingress VIF shares the same parent ID with the
egress VIF.

Patches 4, 5, 6 and 7 add the support in the mlxsw Spectrum driver for trap
and forward routes, while marking the trapped packets with the
offload_mr_fwd_mark.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the support of trap-and-forward route action in the multicast routing
offloading logic. A route will be set to trap-and-forward action if one (or
more) of its output interfaces is not offload-able, i.e. does not have a
valid Spectrum RIF.

This way, a route with mixed output VIFs list, which contains both
offload-able and un-offload-able devices can go through partial offloading
in hardware, and the rest will be done in the kernel ipmr module.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In addition to the current multicast route actions, which include trap
route action and a forward route action, add the trap-and-forward multicast
route action, and implement it in the multicast routing hardware logic.

To implement that, add a trap-and-forward ACL action as the last action in
the route flexible action set. The used trap is the ACL2 trap, which marks
the packets with offload_mr_forward_mark, to prevent the packet from being
forwarded again by the kernel.

Note: At that stage the offloading logic does not support trap-and-forward
multicast routes. This patch adds the support only in the hardware logic.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a multicast route is configured with trap-and-forward action, the
packets should be marked with skb->offload_mr_fwd_mark, in order to prevent
the packets from being forwarded again by the kernel ipmr module.

Due to this, it is not possible to use the already existing multicast trap
(MLXSW_TRAP_ID_ACL1) as the packet should be marked differently. Add the
MLXSW_TRAP_ID_ACL2 which is for trap-and-forward multicast routes, and set
the offload_mr_fwd_mark skb field in its handler.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use trap/discard flex action to implement trap and forward. The action will
later be used for multicast routing, as the multicast routing mechanism is
done using ACL flexible actions in Spectrum hardware. Using that action, it
will be possible to implement a trap-and-forward route.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the ipmr module to not forward packets if:
 - The packet is marked with the offload_mr_fwd_mark, and
 - Both input interface and output interface share the same parent ID.

This way, a packet can go through partial multicast forwarding in the
hardware, where it will be forwarded only to the devices that share the
same parent ID (AKA, reside inside the same hardware). The kernel will
forward the packet to all other interfaces.

To do this, add the ipmr_offload_forward helper, which per skb, ingress VIF
and egress VIF, returns whether the forwarding was offloaded to hardware.
The ipmr_queue_xmit frees the skb and does not forward it if the result is
a true value.

All the forwarding path code compiles out when the CONFIG_NET_SWITCHDEV is
not set.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to allow the ipmr module to do partial multicast forwarding
according to the device parent ID, add the device parent ID field to the
VIF struct. This way, the forwarding path can use the parent ID field
without invoking switchdev calls, which requires the RTNL lock.

When a new VIF is added, set the device parent ID field in it by invoking
the switchdev_port_attr_get call.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to the offload_fwd_mark field, the offload_mr_fwd_mark field is
used to allow partial offloading of MFC multicast routes.

Switchdev drivers can offload MFC multicast routes to the hardware by
registering to the FIB notification chain. When one of the route output
interfaces is not offload-able, i.e. has different parent ID, the route
cannot be fully offloaded by the hardware. Examples to non-offload-able
devices are a management NIC, dummy device, pimreg device, etc.

Similar problem exists in the bridge module, as one bridge can hold
interfaces with different parent IDs. At the bridge, the problem is solved
by the offload_fwd_mark skb field.

Currently, when a route cannot go through full offload, the only solution
for a switchdev driver is not to offload it at all and let the packet go
through slow path.

Using the offload_mr_fwd_mark field, a driver can indicate that a packet
was already forwarded by hardware to all the devices with the same parent
ID as the input device. Further patches in this patch-set are going to
enhance ipmr to skip multicast forwarding to devices with the same parent
ID if a packets is marked with that field.

The reason why the already existing "offload_fwd_mark" bit cannot be used
is that a switchdev driver would want to make the distinction between a
packet that has already gone through L2 forwarding but did not go through
multicast forwarding, and a packet that has already gone through both L2
and multicast forwarding.

For example: when a packet is ingressing from a switchport enslaved to a
bridge, which is configured with multicast forwarding, the following
scenarios are possible:
 - The packet can be trapped to the CPU due to exception while multicast
   forwarding (for example, MTU error). In that case, it had already gone
   through L2 forwarding in the hardware, thus A switchdev driver would
   want to set the skb->offload_fwd_mark and not the
   skb->offload_mr_fwd_mark.
 - The packet can also be trapped due to a pimreg/dummy device used as one
   of the output interfaces. In that case, it can go through both L2 and
   (partial) multicast forwarding inside the hardware, thus a switchdev
   driver would want to set both the skb->offload_fwd_mark and
   skb->offload_mr_fwd_mark.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellaox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have lost a comment for minimum mtu value set for netdevice with
'commit d894be57 ("ethernet: use net core MTU range checking in
more drivers"). Updating it accordingly.
Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We've had support for setting both a minimum and maximum bandwidth via
.ndo_set_vf_bw since commit 883a9ccb ("fm10k: Add support for SR-IOV
to driver", 2014-09-20).

Likely because we do not support minimum rates, the declaration
mis-ordered the "unused" parameter, which causes warnings when analyzed
with cppcheck.

Fix this warning by properly declaring the min_rate and max_rate
variables in the declaration and definition (rather than using
"unused"). Also rename "rate" to max_rate so as to clarify that we only
support setting the maximum rate.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Don't hard code the function names in the diagnostic output when these
reset related routines fail. Instead, use %s and __func__ so that future
refactors don't need to change the print outs.

Additionally, while we are here, add missing function header comments
for the new reset_prepare and reset_done function handlers.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Correct the backward logic using !net_ratelimit()

Miscellanea:

o Add a blank line before the error return label
Signed-off-by: NJoe Perches <joe@perches.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that we have a working MAC/VLAN queue for handling MAC/VLAN messages
from the netdev, replace the default handler for the VF<->PF messages.
This new handler is very similar to the default code, but uses the
MAC/VLAN queue instead of sending the message directly. Unfortunately we
can't easily re-use the default code, so we'll just replace the entire
function.

This ensures that a VF requesting a large number of VLANs or MAC
addresses does not start a reset cycle, as explained in the commit which
introduced the message queue.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NNgai-mint Kwan <ngai-mint.kwan@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>