- 08 10月, 2009 40 次提交
-
-
由 Johannes Berg 提交于
is_ht can be bool instead of u8, and there's no need to use IWL_CHANNEL_WIDTH_* constants in supported_chan_width when that could just be named is_40mhz instead. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Separate set_hw_params() function for 6000 series from 5000/1000 series because: 1) 6000 series use different set of sensitivity range table 2) 6000 series has different uCode image size Also include the new sensitivity parameters needed by sensitivity algorithm. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Different NIC has different requirements for configuration. Currently all 5000 series hardware and later share the same configuration function even though they do not need the same configurations. Fix this by separating the needed configuration actions for each hardware model. .5000 series: L1-ASPM H/W bug work-around configure radio write CSR_HW_IF_CONFIG_REG for uCode use work-around for NIC get stuck after early PCIe power off .1000 series: write CSR_HW_IF_CONFIG_REG for uCode use setting digital SVR for 1000 card to 1.32V .6000 series: configure radio write CSR_HW_IF_CONFIG_REG for uCode use write CSR_GP_DRIVER_REG to indicate radio sku Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Remove few of the parameters not used and no longer valid in EEPROM. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Modify LED blink index table to include 1Mbps. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
As noted by Jiri. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is the last part to make ath9k hw code core driver agnostic. I believe ath9k_htc can now use use the hw code unmodified. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
mac.c is now core driver independent. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
hw code will be shared between ath9k and ath9k_htc. Just a few more files are left to clean up, mark them as well. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is used by hw code. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is used just to determine how to program the MAC, either for 20 MHz operation of 40 MHz so just use conf_is_ht40() Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This was for supporting 25 MHz spacing for HT40, this is not used as we use 20 MHz spacing instead for HT40 as per 802.11n. The hardware is capable of it though so we leave the phymode definition and EEPROM parsing for it. If some experimenter wants to work on this stuff stuff you can add an extension enabling bool on ath_common and perhaps some debugfs knob to enable it. Keep in mind you'll also need to update the phymode with the AR_PHY_FC_DYN2040_EXT_CH which has been left on the driver. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Make use of it on hw code in ath9k to avoid using the ath9k ath_softc. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Also make ath5k and ath9k use it, and share register definitions. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Only common ath read/write ops go through the common ops. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We can propagate better errors upon failed hw initialization, and set up the ath_common structure for attach purposes. This will become important once we start using the ath_common for read/write ops. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
In an effort to make hw code driver core agnostic read and write operations are defined on the ath_common structure. This patch adds that and makes ath9k use it. This allows drivers like ath9k_htc to define its own read/write ops and still rely on the same hw code. This also paves the way for sharing code between ath9k/ath5k/ath9k_htc. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We disable ASPM when enabling bluetooth coexistance. Disabling ASPM is a bus specific operation. In the future other buses may support bluetooth coexistance, an example is USB. To this end move the current routine which disables ASPM into pci.c, and declare it the PCI bt_coex_prep() helper. Additionally, since ASPM is a PCI-Express primitive ensure we don't ever try to muck with ASPM registers on non PCI-express devices. This also cleans up hw.c to not include bus specific headers or utilities. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This ensures that we can access common on hw related code independent of the driver core. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This fixes this sparse warning: CHECK drivers/net/wireless/ath/ath5k/attach.c drivers/net/wireless/ath/ath5k/attach.c:288:42: warning: symbol 'ee' shadows an earlier one drivers/net/wireless/ath/ath5k/attach.c:109:34: originally declared here Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
The ah_sta_id was really being used as the macaddr. ath5k still does not use the association ID now passed up by mac80211, that can be fixed later. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
These are provided by ath_common. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
These are common amongst ath9k and ath5k, so put them into the common structure and make ath9k to use it. ar9170 can use macaddr, and curbssid. We'll change ath5k and ar9170 separately. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Use the already provided helper instead of rewriting the code required in place. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
The same code was being implemented on reset for setting the bssidmask, instead just use the already provided helper. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Historically some macro helpers have been users for this, AR5K_LOW_ID() and AR5K_HIGH_ID(), use upstream unaligned helpers instead. This applid to ath5k and ar9170. ath9k already uses this. Worth noting is ath5k uses an ah_sta_id but that is already the MAC address combined with the associaiton ID, ah_sta_id is really ETH_ALEN in size. Cc: Bob Copeland <me@bobcopeland.com> Cc: Nick Kossifidis <mick@madwifi-project.org> Cc: Christian Lamparter <chunkeey@web.de> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This is used by both ath5k and ath9k to set the first bssid mask. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ath9k_hw_setpower_nolock --> ath9k_hw_setpower() ath9k_hw_setpower() --> ath9k_setpower() Also change the param for ath9k_setpower() to pass the ath_softc. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
And we make it static. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ath9k_hw_setpower() is a core driver helper with locking protection. Locking protection should be left to the driver core, not the hw code. Hardware code no longer contends for locking when it needs to wake up the chip or put it to sleep. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
These are driver core helpers. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
When the TSF is reset power save state is disabled and then restored. The helpers to disable power save and restore it use a lock provided by the driver core. Move the callers of the helpers outside of the hw code. We reset the TSF when mac80211 tells us and on the beacon.c helper ath9k_hw_beaconinit() when it is made explicitly required. Add a helper on beacon.c which will deal with ps awake/restore if we need to reset the TSF upon ath9k_hw_beaconinit(). Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Also just pass the ath_hw as the parameter. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
These are only used by btcoex.c on one routine, so stuff them into that file. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-