Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 26 7月, 2008 9 次提交
  3. 25 7月, 2008 18 次提交
    • L
      x86-64: Clean up 'save/restore_i387()' usage · b30f3ae5
      由 Linus Torvalds 提交于 
      Suresh Siddha wants to fix a possible FPU leakage in error conditions,
but the fact that save/restore_i387() are inlines in a header file makes
that harder to do than necessary.  So start off with an obvious cleanup.

This just moves the x86-64 version of save/restore_i387() out of the
header file, and moves it to the only file that it is actually used in:
arch/x86/kernel/signal_64.c.  So exposing it in a header file was wrong
to begin with.

[ Side note: I'd like to fix up some of the games we play with the
  32-bit version of these functions too, but that's a separate
  matter.  The 32-bit versions are shared - under different names
  at that! - by both the native x86-32 code and the x86-64 32-bit
  compatibility code ]
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b30f3ae5
    • B
      ide: remove <asm/ide.h> for some archs · 2a8f7450
      由 Bartlomiej Zolnierkiewicz 提交于 
      * Remove <linux/irq.h> include from <asm-ia64.h> (<linux/ide.h> includes
  <linux/interrupt.h> which is enough).

* Remove <asm/ide.h> for alpha/blackfin/h8300/ia64/m32r/sh/x86/xtensa
  (this leaves us with arm/frv/m68k/mips/mn10300/parisc/powerpc/sparc[64]).

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      2a8f7450
    • B
      ide-generic: remove ide_default_{io_base,irq}() inlines (take 3) · f01d35d8
      由 Bartlomiej Zolnierkiewicz 提交于 
      Replace ide_default_{io_base,irq}() inlines by legacy_{bases,irqs}[].

v2:
Add missing zero-ing of hws[] (caught during testing by Borislav Petkov).

v3:
Fix zero-oing of hws[] for _real_ this time.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      f01d35d8
    • B
      ide: define MAX_HWIFS in <linux/ide.h> · d83b8b85
      由 Bartlomiej Zolnierkiewicz 提交于 
      * Now that ide_hwif_t instances are allocated dynamically
  the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10
  is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs
  except these ones that use MAX_HWIFS == 1.

* Define MAX_HWIFS in <linux/ide.h> instead of <asm/ide.h>.

[ Please note that avr32/cris/v850 have no <asm/ide.h>
  and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      d83b8b85
    • B
      ide-generic: remove "no_pci_devices()" quirk from ide_default_io_base() · b6cd7da5
      由 Bartlomiej Zolnierkiewicz 提交于 
      Since the decision to probe for ISA ide2-6 is now left to the user
"no_pci_devices()" quirk is no longer needed and may be removed.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      b6cd7da5
    • U
      flag parameters add-on: remove epoll_create size param · 9fe5ad9c
      由 Ulrich Drepper 提交于 
      Remove the size parameter from the new epoll_create syscall and renames the
syscall itself.  The updated test program follows.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9fe5ad9c
    • U
      flag parameters: inotify_init · 4006553b
      由 Ulrich Drepper 提交于 
      This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before).  The
values accepted for this parameter are function-specific and defined in the
inotify.h header.  Here the values must match the O_* flags, though.  In this
patch CLOEXEC support is introduced.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("inotify_init1(0) set close-on-exit");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4006553b
    • U
      flag parameters: pipe · ed8cae8b
      由 Ulrich Drepper 提交于 
      This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value.  This patch implements
the handling of O_CLOEXEC for the flag.  I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation.  I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.

The implementation introduces do_pipe_flags.  I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code.  To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fd[2];
  if (syscall (__NR_pipe2, fd, 0) != 0)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
    {
      puts ("pipe2(O_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ed8cae8b
    • U
      flag parameters: dup2 · 336dd1f7
      由 Ulrich Drepper 提交于 
      This patch adds the new dup3 syscall.  It extends the old dup2 syscall by one
parameter which is meant to hold a flag value.  Support for the O_CLOEXEC flag
is added in this patch.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_dup3
# ifdef __x86_64__
#  define __NR_dup3 292
# elif defined __i386__
#  define __NR_dup3 330
# else
#  error "need __NR_dup3"
# endif
#endif

int
main (void)
{
  int fd = syscall (__NR_dup3, 1, 4, 0);
  if (fd == -1)
    {
      puts ("dup3(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("dup3(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC);
  if (fd == -1)
    {
      puts ("dup3(O_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("dup3(O_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      336dd1f7
    • U
      flag parameters: epoll_create · a0998b50
      由 Ulrich Drepper 提交于 
      This patch adds the new epoll_create2 syscall.  It extends the old epoll_create
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EPOLL_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 1, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a0998b50
    • U
      flag parameters: eventfd · b087498e
      由 Ulrich Drepper 提交于 
      This patch adds the new eventfd2 syscall.  It extends the old eventfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("eventfd2(0) sets close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b087498e
    • U
      flag parameters: signalfd · 9deb27ba
      由 Ulrich Drepper 提交于 
      This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9deb27ba
    • U
      flag parameters: paccept · aaca0bdc
      由 Ulrich Drepper 提交于 
      This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      aaca0bdc
    • A
      PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures · 27ac792c
      由 Andrea Righi 提交于 
      On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      27ac792c
    • A
      x86: add hugepagesz option on 64-bit · b4718e62
      由 Andi Kleen 提交于 
      Add an hugepagesz=...  option similar to IA64, PPC etc.  to x86-64.

This finally allows to select GB pages for hugetlbfs in x86 now that all
the infrastructure is in place.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b4718e62
    • A
      hugetlb: modular state for hugetlb page size · a5516438
      由 Andi Kleen 提交于 
      The goal of this patchset is to support multiple hugetlb page sizes.  This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg.  huge page
size, number of huge pages currently allocated, etc).

The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.

This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.

Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a5516438
    • J
      mm: remove double indirection on tlb parameter to free_pgd_range() & Co · 42b77728
      由 Jan Beulich 提交于 
      The double indirection here is not needed anywhere and hence (at least)
confusing.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      42b77728
    • R
      access_process_vm device memory infrastructure · 28b2ee20
      由 Rik van Riel 提交于 
      In order to be able to debug things like the X server and programs using
the PPC Cell SPUs, the debugger needs to be able to access device memory
through ptrace and /proc/pid/mem.

This patch:

Add the generic_access_phys access function and put the hooks in place
to allow access_process_vm to access device or PPC Cell SPU memory.

[riel@redhat.com: Add documentation for the vm_ops->access function]
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NBenjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      28b2ee20
  5. 24 7月, 2008 2 次提交
  7. 23 7月, 2008 3 次提交
  9. 22 7月, 2008 6 次提交
    • S
      x64, apic: use generic apic_write() for ack_APIC_irq() · df1be437
      由 Suresh Siddha 提交于 
      I tested tip/master and found an issue (patch attached)
for x2apic support. This is not because of the recent merges we had, but
because of something(where we still access memory based interface after
enabling x2apic mode) that slipped through my earlier tests.

Probably it is a good idea to unmap the memory mapped interface, once we switch
to x2apic mode. That will catch the issues much earlier. I will
post another patch for this.

ack_APIC_irq() is used at too many generic places (and not just during
irq_chip handling!) to use the native_apic_mem_write(). For ex, this will
break x2apic based systems.

Fix ack_APIC_irq() to use the generic apic_write() even for 64-bit.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: suresh.b.siddha@intel.com
Cc: yong.y.wang@linux.intel.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      df1be437
    • J
      x86: add PTE_FLAGS_MASK · 77be1fab
      由 Jeremy Fitzhardinge 提交于 
      PTE_PFN_MASK was getting lonely, so I made it a friend.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      77be1fab
    • J
      x86: rename PTE_MASK to PTE_PFN_MASK · 59438c9f
      由 Jeremy Fitzhardinge 提交于 
      Rusty, in his peevish way, complained that macros defining constants
should have a name which somewhat accurately reflects the actual
purpose of the constant.

Aside from the fact that PTE_MASK gives no clue as to what's actually
being masked, and is misleadingly similar to the functionally entirely
different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the
problem is.

But if this patch silences the incessent noise, then it will have
achieved its goal (TODO: write test-case).
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      59438c9f
    • R
      x86: fix pte_flags() to only return flags, fix lguest (updated) · c2e3277f
      由 Rusty Russell 提交于 
      (Jeremy said:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	rusty: use PTE_MASK
 When I asked:
	jsgf: does that include the NX flag?
 He responded eloquently:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	yes, it's the official constant of masking flags out of ptes
)

Change a15af1c9 'x86/paravirt: add
pte_flags to just get pte flags' removed lguest's private pte_flags()
in favor of a generic one.

Unfortunately, the generic one doesn't filter out the non-flags bits:
this results in lguest creating corrupt shadow page tables and blowing
up host memory.

Since noone is supposed to use the pfn part of pte_flags(), it seems
safest to always do the filtering.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-and-morning-tea-spilled-by: NIngo Molnar <mingo@elte.hu>
      c2e3277f
    • Y
      x86: add apic probe for genapic 64bit, v2 · 1b9b89e7
      由 Yinghai Lu 提交于 
      introducing an APIC handling probing abstraction:

 static struct genapic *apic_probe[] __initdata = {
	&apic_x2apic_uv_x,
	&apic_x2apic_phys,
	&apic_x2apic_cluster,
	&apic_physflat,
	NULL,
 };

This way we can remove UV, x2apic specific code from genapic_64.c and
move them to their specific genapic files.

[ v2: fix compiling when CONFIG_ACPI is not set ]
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1b9b89e7
    • T
      x86: convert Dprintk to pr_debug · cfc1b9a6
      由 Thomas Gleixner 提交于 
      There are a couple of places where (P)Dprintk is used which is an old
compile time enabled printk wrapper. Convert it to the generic
pr_debug().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      cfc1b9a6
  11. 21 7月, 2008 1 次提交
    • I
      KVM: fix exception entry / build bug, on 64-bit · 33a37eb4
      由 Ingo Molnar 提交于 
      -tip testing found this build bug:

 arch/x86/kvm/built-in.o:(.text.fixup+0x1): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0xb): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x15): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x1f): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x29): relocation truncated to fit: R_X86_64_32 against `.text'

Introduced by commit 4ecac3fd. The problem is that 'push' will default
to 32-bit, which is not wide enough as a fixup address. (and which would
crash on any real fixup event even if it was wide enough)

Introduce KVM_EX_PUSH to get the proper address push width on 64-bit too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      33a37eb4
  13. 20 7月, 2008 1 次提交