Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch is a bug fix to the SystemACE driver to use resource_size_t
for physical address instead of unsigned long.  This makes the driver
work correctly on 32 bit systems with 64-bit resources (e.g. PowerPC 440).
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Various printk format string in code used by the Xilinx Virtex platform
are not 32-bit/64-bit safe.  Add correct casting to fix the bugs.
Reported-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Without this patch it is possible to select drivers which require
bestcomm support without bestcomm support being selected.  This
patch reworks the bestcomm dependencies to ensure the correct
bestcomm tasks are always enabled.
Reported-by: NHans Lehmann <hans.lehmann@ritter-elektronik.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix init_idle()'s use of sched_clock()
  sched: fix stale value in average load per task

Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

C2port implements a two wire serial communication protocol (bit
banging) designed to enable in-system programming, debugging, and
boundary-scan testing on low pin-count Silicon Labs devices.

Currently this code supports only flash programming through sysfs
interface but extensions shoud be easy to add.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a brief document about omap2430/3430 HDQ/1-wire driver.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide the BQ27000 slave interface driver.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware
protocol of the master functions of the Benchmark HDQ and the Dallas
Semiconductor 1-Wire protocols.  These protocols use a single wire for
communication between the master (HDQ/1-Wire controller) and the slave
(HDQ/1-Wire external compliant device).

This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Acked-by: NFelipe Balbi <felipe.balbi@nokia.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Export the w1_read_8 function for use of drivers.  The OMAP HDQ
driver(drivers/w1/masters/omap_hdq.c) uses this function.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Dallas DS1390/93/94 SPI RTC chip.
Signed-off-by: NMark Jackson <mpfj@mimc.co.uk>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C
RTC.  It currently does not support the RTC's Alarm or Fixed-cycle timer.

[akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation]
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for the RTC provided by the Wolfson Microelectronics
WM8350.

This driver was originally written by Graeme Gregory and Liam Girdwood,
though it has been modified since then to update it to current mainline
coding standards and for API completeness.

[akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()]
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Liam Girdwood <linux@wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ics932s401 is a clock generator chip.  This driver allows users to
read the current clock outputs.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New driver to play with.  As Jean mentioned a couple of years ago, this
chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13
voltage sensors.  This driver has been tested on an IntelliStation Z30.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a driver to the accelerometer sensor found in several HP
laptops (under the commercial names of "HP Mobile Data Protection System
3D" and "HP 3D driveguard").  It tries to have more or less the same
interfaces as the hdaps and other accelerometer drivers: in sysfs and as
a joystick.

This driver was first written by Yan Burman.  Eric Piel has updated it
and slimed it up (including the removal of an interface to access to the
free-fall feature of the sensor because it is not reliable enough for
now).  Pavel Machek removed few more features and switched locking from
semaphore to mutex.

Several people have contributed to the database of the axes.

[eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API]
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NYan Burman <burman.yan@gmail.com>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The start pfn calculation in page_cgroup's memory hotplug notifier chain
is wrong.
Tested-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We're working with an AT91SAM9263 Rev B in our design and I experienced
some inconsistency in spi-based touchscreen usage between our board and
the Atmel evaluation kit we have that runs on a Rev A chip.

The data was apparently delayed by 1 byte and got ridiculous data out of
the touchscreen driver, very strange.  As everything looked normal in
the spi, touchscreen and dma logs, I contacted the Atmel support and
they triggered me on a new HW bug that appeared in the Rev B SPI
controller.

The problem is that the SPI controller on the Rev B needs that the
software reset is performed two times so that it's performed correctly.

Applying the patch below solves the issue on my Rev B board.  I've tested
it as well on my Rev A evaluation kit and it has apparently no unwanted
side effect, things continue to work as expected.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support
along the same code paths.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement correct range checking for adt7470 to prevent userland from
writing impossible values into the chip, and cap out-of-range values per
standard hwmon conventions.

Implement correct rounding of input values per standard hwmon conventions.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement correct range checking for adt7470 to prevent userland from
writing impossible values into the chip, and cap out-of-range values per
standard hwmon conventions.

Implement correct rounding of input values per standard hwmon conventions.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We only need the cacheline padding on SMP kernels.  Saves 6k:

   text    data     bss     dec     hex filename
   5713     388    8840   14941    3a5d kernel/kprobes.o
   5713     388    2632    8733    221d kernel/kprobes.o
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

xip documentation updated:
- change "get_xip_page" to "get_xip_mem";
- explain changed function parameters
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add printk-formats.txt so that we don't have to keep fixing the
same things over and over again.  <wishful thinking>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It mistakenly assumes that a static local in an inlined function is a
kernel-wide singleton.  It also has no callers, so let's remove it.

Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the last refactoring of shrink_submounts a variable was not completely
renamed.  So finish the renaming of mnt to m now.

Without this if you attempt to mount an nfs mount that has both automatic
nfs sub mounts on it, and has normal mounts on it.  The unmount will
succeed when it should not.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep warns about following message at boot time on one of my test
machine.  Then, schedule_on_each_cpu() sholdn't be called when the task
have mmap_sem.

Actually, lru_add_drain_all() exist to prevent the unevictalble pages
stay on reclaimable lru list.  but currenct unevictable code can rescue
unevictable pages although it stay on reclaimable list.

So removing is better.

In addition, this patch add lru_add_drain_all() to sys_mlock() and
sys_mlockall().  it isn't must.  but it reduce the failure of moving to
unevictable list.  its failure can rescue in vmscan later.  but reducing
is better.

Note, if above rescuing happend, the Mlocked and the Unevictable field
mismatching happend in /proc/meminfo.  but it doesn't cause any real
trouble.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.28-rc2-mm1 #2
-------------------------------------------------------
lvm/1103 is trying to acquire lock:
 (&cpu_hotplug.lock){--..}, at: [<c0130789>] get_online_cpus+0x29/0x50

but task is already holding lock:
 (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_sem){----}:
       [<c0153da2>] check_noncircular+0x82/0x110
       [<c0185e6a>] might_fault+0x4a/0xa0
       [<c0156161>] validate_chain+0xb11/0x1070
       [<c0185e6a>] might_fault+0x4a/0xa0
       [<c0156923>] __lock_acquire+0x263/0xa10
       [<c015714c>] lock_acquire+0x7c/0xb0			(*) grab mmap_sem
       [<c0185e6a>] might_fault+0x4a/0xa0
       [<c0185e9b>] might_fault+0x7b/0xa0
       [<c0185e6a>] might_fault+0x4a/0xa0
       [<c0294dd0>] copy_to_user+0x30/0x60
       [<c01ae3ec>] filldir+0x7c/0xd0
       [<c01e3a6a>] sysfs_readdir+0x11a/0x1f0			(*) grab sysfs_mutex
       [<c01ae370>] filldir+0x0/0xd0
       [<c01ae370>] filldir+0x0/0xd0
       [<c01ae4c6>] vfs_readdir+0x86/0xa0			(*) grab i_mutex
       [<c01ae75b>] sys_getdents+0x6b/0xc0
       [<c010355a>] syscall_call+0x7/0xb
       [<ffffffff>] 0xffffffff

-> #2 (sysfs_mutex){--..}:
       [<c0153da2>] check_noncircular+0x82/0x110
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c0156161>] validate_chain+0xb11/0x1070
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c0156923>] __lock_acquire+0x263/0xa10
       [<c015714c>] lock_acquire+0x7c/0xb0			(*) grab sysfs_mutex
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0
       [<c01e422f>] create_dir+0x3f/0x90
       [<c01e42a9>] sysfs_create_dir+0x29/0x50
       [<c04faaf5>] _spin_unlock+0x25/0x40
       [<c028f21d>] kobject_add_internal+0xcd/0x1a0
       [<c028f37a>] kobject_set_name_vargs+0x3a/0x50
       [<c028f41d>] kobject_init_and_add+0x2d/0x40
       [<c019d4d2>] sysfs_slab_add+0xd2/0x180
       [<c019d580>] sysfs_add_func+0x0/0x70
       [<c019d5dc>] sysfs_add_func+0x5c/0x70			(*) grab slub_lock
       [<c01400f2>] run_workqueue+0x172/0x200
       [<c014008f>] run_workqueue+0x10f/0x200
       [<c0140bd0>] worker_thread+0x0/0xf0
       [<c0140c6c>] worker_thread+0x9c/0xf0
       [<c0143c80>] autoremove_wake_function+0x0/0x50
       [<c0140bd0>] worker_thread+0x0/0xf0
       [<c0143972>] kthread+0x42/0x70
       [<c0143930>] kthread+0x0/0x70
       [<c01042db>] kernel_thread_helper+0x7/0x1c
       [<ffffffff>] 0xffffffff

-> #1 (slub_lock){----}:
       [<c0153d2d>] check_noncircular+0xd/0x110
       [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0
       [<c0156161>] validate_chain+0xb11/0x1070
       [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0
       [<c015433d>] mark_lock+0x35d/0xd00
       [<c0156923>] __lock_acquire+0x263/0xa10
       [<c015714c>] lock_acquire+0x7c/0xb0
       [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0
       [<c04f93a3>] down_read+0x43/0x80
       [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0		(*) grab slub_lock
       [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0
       [<c04fd9ac>] notifier_call_chain+0x3c/0x70
       [<c04f5454>] _cpu_up+0x84/0x110
       [<c04f552b>] cpu_up+0x4b/0x70				(*) grab cpu_hotplug.lock
       [<c06d1530>] kernel_init+0x0/0x170
       [<c06d15e5>] kernel_init+0xb5/0x170
       [<c06d1530>] kernel_init+0x0/0x170
       [<c01042db>] kernel_thread_helper+0x7/0x1c
       [<ffffffff>] 0xffffffff

-> #0 (&cpu_hotplug.lock){--..}:
       [<c0155bff>] validate_chain+0x5af/0x1070
       [<c040f7e0>] dev_status+0x0/0x50
       [<c0156923>] __lock_acquire+0x263/0xa10
       [<c015714c>] lock_acquire+0x7c/0xb0
       [<c0130789>] get_online_cpus+0x29/0x50
       [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0
       [<c0130789>] get_online_cpus+0x29/0x50
       [<c0130789>] get_online_cpus+0x29/0x50
       [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10
       [<c0130789>] get_online_cpus+0x29/0x50			(*) grab cpu_hotplug.lock
       [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0
       [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0
       [<c0156945>] __lock_acquire+0x285/0xa10
       [<c0188f09>] vma_merge+0xa9/0x1d0
       [<c0187450>] mlock_fixup+0x180/0x200
       [<c0187548>] do_mlockall+0x78/0x90			(*) grab mmap_sem
       [<c01878e1>] sys_mlockall+0x81/0xb0
       [<c010355a>] syscall_call+0x7/0xb
       [<ffffffff>] 0xffffffff

other info that might help us debug this:

1 lock held by lvm/1103:
 #0:  (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0

stack backtrace:
Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2
Call Trace:
 [<c01555fc>] print_circular_bug_tail+0x7c/0xd0
 [<c0155bff>] validate_chain+0x5af/0x1070
 [<c040f7e0>] dev_status+0x0/0x50
 [<c0156923>] __lock_acquire+0x263/0xa10
 [<c015714c>] lock_acquire+0x7c/0xb0
 [<c0130789>] get_online_cpus+0x29/0x50
 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0
 [<c0130789>] get_online_cpus+0x29/0x50
 [<c0130789>] get_online_cpus+0x29/0x50
 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10
 [<c0130789>] get_online_cpus+0x29/0x50
 [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0
 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0
 [<c0156945>] __lock_acquire+0x285/0xa10
 [<c0188f09>] vma_merge+0xa9/0x1d0
 [<c0187450>] mlock_fixup+0x180/0x200
 [<c0187548>] do_mlockall+0x78/0x90
 [<c01878e1>] sys_mlockall+0x81/0xb0
 [<c010355a>] syscall_call+0x7/0xb
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__register_kprobe() can be preempted after checking probing address but
before module_text_address() or try_module_get(), and in this interval
the module can be unloaded.  In that case, try_module_get(probed_mod)
will access to invalid address, or kprobe will probe invalid address.

This patch uses preempt_disable() to protect it and uses
__module_text_address() and __kernel_text_address().
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With this change, control file 'freezer.state' doesn't exist in root
cgroup, making root cgroup unfreezable.

I think it's reasonable to disallow freeze tasks in the root cgroup.  And
then we can avoid fork overhead when freezer subsystem is compiled but not
used.

Also make writing invalid value to freezer.state returns EINVAL rather
than EIO.  This is more consistent with other cgroup subsystem.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In theory the task can be moved to another cgroup and the freezer will be
freed right after task_lock is dropped, so the lock results in zero
protection.

But in the case of freezer_fork() no lock is needed, since the task is not
in tasklist yet so it won't be moved to another cgroup, so task->cgroups
won't be changed or invalidated.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver supports the Xilinx XPS GPIO IP core which has the typical
GPIO features.
Signed-off-by: NKiran Sutariya <kirans@xilinx.com>
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: "Grant Likely" <grant.likely@secretlab.ca>
Cc: <avorontsov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If all allowable memory is unreclaimable, it is possible to loop forever
in the page allocator for ~__GFP_NORETRY allocations.

During this time, it is also possible for a task's cpuset to expand its
set of allowable nodes so that it now includes free memory.  The cached
copy of this set, current->mems_allowed, is stale, however, since there
has not been a subsequent call to cpuset_update_task_memory_state().

The cached copy of the set of allowable nodes is now updated in the page
allocator's slow path so the additional memory is available to
get_page_from_freelist().

[akpm@linux-foundation.org: add comment]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Paul Menage <menage@google.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that edac_mc_del_mc will kobject_put the last kref on the
mci object.

If the timing is just right, that means that the mci object is freed
before before i5000_remove_one has a chance to free the resources
associated with it, causing a null pointer exceptions when unloading the
driver.  Insert a kobject_{get,put} pair so that this doesn't happen.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that if one registers a struct platform_device, the
platform device code expects that platform_device.device->driver points
to a struct driver inside a struct platform_driver.

This is not the case with the ipmi-si, ipmi-msghandler and ibmaem
drivers, which causes the suspend/resume hook functions to jump off into
nowhere, causing a crash.  Make this assumption hold true for these
three drivers.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Acked-by: NCorey Minyard <cminyard@mvista.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed because old the definition of unsigned long cannot be negative.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Reported-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds accelerometer and temperature sensor support for Macbook 4.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oops.  Part of the hugetlb private reservation code was not fully
converted to use hstates.

When a huge page must be unmapped from VMAs due to a failed COW,
HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of
the page size being used.  This works if the VMA is using the default
huge page size.  Otherwise we might unmap too much, too little, or
trigger a BUG_ON.  Rare but serious -- fix it.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: fix poll_controller to pass proper structures and check all rx queues
  niu: Fix readq implementation when architecture does not provide one.
  hostap: pad the skb->cb usage in lieu of a proper fix
  rtl8187 : support for Sitecom WL-168 0001 v4
  mac80211: fix notify_mac function
  rtl8187: Add Abocom USB ID
  net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller
  tcp_htcp: last_cong bug fix
  [netdrvr] smc911x: fix for driver resume (and compilation warning)
  RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface.
  cxgb3 - Limit multiqueue setting to msi-x
  cxgb3 - eeprom read fixes
  myri10ge: fix stop/go ordering even more