The encapsulated ethernet and VLAN header may be outside the received
ethernet frame. Thus the skb buffer size has to be checked before it can be
parsed to find out if it encapsulates another batman-adv packet.

Fixes: 42019357 ("batman-adv: softif bridge loop avoidance")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Pull RTC fixes from Alexandre Belloni:
 "A few fixes for the RTC subsystem.  The documentation fix already
  missed 4.5 so I think it is worth taking it now:

  A documentation fix for s3c and two fixes for the ds1307"

* tag 'rtc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: ds1307: Use irq when available for wakeup-source device
  rtc: ds1307: ds3231 temperature s16 overflow
  rtc: s3c: Document in binding that only s3c6410 needs a src clk

Pull power management fixes from Rafael Wysocki:
 "Two fixes for issues introduced recently, one for an intel_pstate
  driver problem uncovered by the recent switch over from using timers
  and the other one for a potential cpufreq core problem related to
  system suspend/resume.

  Specifics:

   - Fix an intel_pstate driver problem causing CPUs to get stuck in the
     highest P-state when completely idle uncovered by the recent switch
     over from using timers (Rafael Wysocki).

   - Avoid attempts to get the current CPU frequency when all devices
     (like I2C controllers that may be nedded for that purpose) have
     been suspended during system suspend/resume (Rafael Wysocki)"

* tag 'pm+acpi-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set
  intel_pstate: Avoid getting stuck in high P-states when idle

With commit 8bc2a407 ("rtc: ds1307: add support for the
DT property 'wakeup-source'") we lost the ability for rtc irq
functionality for devices that are actually hooked on a real IRQ
line and have capability to wakeup as well. This is not an expected
behavior. So, instead of just not requesting IRQ, skip the IRQ
requirement only if interrupts are not defined for the device.

Fixes: 8bc2a407 ("rtc: ds1307: add support for the DT property 'wakeup-source'")
Reported-by: NTony Lindgren <tony@atomide.com>
Cc: Michael Lange <linuxstuff@milaw.biz>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

while retrieving temperature from ds3231, the result may be overflow
since s16 is too small for a multiplication with 250.

ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Tested-by: NMichael Tatarinov <kukabu@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Pull networking fixes from David Miller:

 1) Fix memory leak in iwlwifi, from Matti Gottlieb.

 2) Add missing registration of netfilter arp_tables into initial
    namespace, from Florian Westphal.

 3) Fix potential NULL deref in DecNET routing code.

 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry
    Ivanov.

 5) Fix dst ref counting in VRF, from David Ahern.

 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck.

 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause.

 8) Ravalidate IPV6 datagram socket cached routes properly, particularly
    with UDP, from Martin KaFai Lau.

 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang.

10) Fix stats typing in bcmgenet driver, from Eric Dumazet.

11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing,
    from Joe Stringer.

12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown.

13) atl2 doesn't actually support scatter-gather, so don't advertise the
    feature.  From Ben Hucthings.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  openvswitch: use flow protocol when recalculating ipv6 checksums
  Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets
  atl2: Disable unimplemented scatter/gather feature
  net/mlx4_en: Split SW RX dropped counter per RX ring
  net/mlx4_core: Don't allow to VF change global pause settings
  net/mlx4_core: Avoid repeated calls to pci enable/disable
  net/mlx4_core: Implement pci_resume callback
  net: phy: spi_ks8895: Don't leak references to SPI devices
  net: ethernet: davinci_emac: Fix platform_data overwrite
  net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable
  qede: Fix single MTU sized packet from firmware GRO flow
  qede: Fix setting Skb network header
  qede: Fix various memory allocation error flows for fastpath
  tcp: Merge tx_flags and tskey in tcp_shifted_skb
  tcp: Merge tx_flags and tskey in tcp_collapse_retrans
  drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open
  tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks
  openvswitch: Orphan skbs before IPv6 defrag
  Revert "Prevent NUll pointer dereference with two PHYs on cpsw"
  VSOCK: Only check error on skb_recv_datagram when skb is NULL
  ...

When using masked actions the ipv6_proto field of an action
to set IPv6 fields may be zero rather than the prevailing protocol
which will result in skipping checksum recalculation.

This patch resolves the problem by relying on the protocol
in the flow key rather than that in the set field action.

Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.")
Cc: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For IPv6, if the device indicates that the checksum is correct, set
CHECKSUM_UNNECESSARY.
Reported-by: NSubbarao Narahari <snarahari@vmware.com>
Signed-off-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NJin Heo <heoj@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atl2 includes NETIF_F_SG in hw_features even though it has no support
for non-linear skbs.  This bug was originally harmless since the
driver does not claim to implement checksum offload and that used to
be a requirement for SG.

Now that SG and checksum offload are independent features, if you
explicitly enable SG *and* use one of the rare protocols that can use
SG without checkusm offload, this potentially leaks sensitive
information (before you notice that it just isn't working).  Therefore
this obscure bug has been designated CVE-2016-2117.
Reported-by: NJustin Yackoski <jyackoski@crypto-nite.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
Mellaox 40G driver fixes for 4.6-rc

With the fix for ARM bug being under the works, these are
few other fixes for mlx4 we have ready to go.

Eran addressed the problematic/wrong reporting of dropped packets, Daniel
fixed some matters related to PPC EEH's and Jenny's patch makes sure
VFs can't change the port's pause settings.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Count SW packet drops per RX ring instead of a global counter. This
will allow monitoring the number of rx drops per ring.

In addition, SW rx_dropped counter was overwritten by HW rx_dropped
counter, sum both of them instead to show the accurate value.

Fixes: a3333b35 ('net/mlx4_en: Moderate ethtool callback to [...] ')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reported-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently changing global pause settings is done via SET_PORT
command with input modifier GENERAL. This command is allowed
for each VF since MTU setting is done via the same command.

Change the above to the following scheme: before passing the
request to the FW, the PF will check whether it was issued
by a slave. If yes, don't change global pause and warn,
otherwise change to the requested value and store for
further reference.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maintain the PCI status and provide wrappers for enabling and disabling
the PCI device.  Performing the actions more than once without doing
its opposite results in warning logs.

This occurred when EEH hotplugged the device causing a warning for
disabling an already disabled device.

Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly')
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move resume related activities to a new pci_resume function instead of
performing them in mlx4_pci_slot_reset.  This change is needed to avoid
a hotplug during EEH recovery due to commit f2da4ccf ("powerpc/eeh:
More relaxed hotplug criterion").

Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly')
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ks8895 driver is using spi_dev_get() apparently just to take a copy
of the SPI device used to instantiate it but never calls spi_dev_put()
to free it.  Since the device is guaranteed to exist between probe() and
remove() there should be no need for the driver to take an extra
reference to it so fix the leak by just using a straight assignment.
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the DaVinci emac driver is removed and re-probed, the actual
pdev->dev.platform_data is populated with an unwanted valid pointer saved by
the previous davinci_emac_of_get_pdata() call, causing a kernel crash when
calling priv->int_disable() in emac_int_disable().

Unable to handle kernel paging request at virtual address c8622a80
...
[<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8)
[<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120)
[<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c)
[<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48)
[<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac)
[<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0)
[<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600)
[<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c)
[<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c)

Fixes: 42f59967 ("net: ethernet: davinci_emac: add OF support")
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to avoid an Unbalanced pm_runtime_enable in the DaVinci
emac driver when the device is removed and re-probed, and a
pm_runtime_disable() call in davinci_emac_remove().

Actually, using unbind/bind on a TI DM8168 SoC gives :
$ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind
net eth1: DaVinci EMAC: davinci_emac_remove()
$ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind
davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Fixes: 3ba97381 ("net: ethernet: davinci_emac: add pm_runtime support")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* pm-cpufreq-fixes:
  cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set
  intel_pstate: Avoid getting stuck in high P-states when idle

Manish Chopra says:

====================
qede: Bug fixes

This series fixes -

* various memory allocation failure flows for fastpath
* issues with respect to driver GRO packets handling

V1->V2

* Send series against net instead of net-next.

Please consider applying this series to "net"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In firmware assisted GRO flow there could be a single MTU sized
segment arriving due to firmware aggregation timeout/last segment
in an aggregation flow, which is not expected to be an actual gro
packet. So If a skb has zero frags from the GRO flow then simply
push it in the stack as non gso skb.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <yuval.mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Skb's network header needs to be set before extracting IPv4/IPv6
headers from it.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <yuval.mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch handles memory allocation failures for fastpath
gracefully in the driver.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <yuval.mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Martin KaFai Lau says:

====================
tcp: Merge timestamp info when coalescing skbs

This series is separated from the RFC series related to
tcp_sendmsg(MSG_EOR) and it is targeting for the net branch.
This patchset is focusing on fixing cases where TCP
timestamp could be lost after coalescing skbs.

A BPF prog is used to kprobe to sock_queue_err_skb()
and print out the value of serr->ee.ee_data.  The BPF
prog (run-able from bcc) is attached here:

BPF prog used for testing:
~~~~~

from __future__ import print_function
from bcc import BPF

bpf_text = """

int trace_err_skb(struct pt_regs *ctx)
{
	struct sk_buff *skb = (struct sk_buff *)ctx->si;
	struct sock *sk = (struct sock *)ctx->di;
	struct sock_exterr_skb *serr;
	u32 ee_data = 0;

	if (!sk || !skb)
		return 0;

	serr = SKB_EXT_ERR(skb);
	bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data);
	bpf_trace_printk("ee_data:%u\\n", ee_data);

	return 0;
};
"""

b = BPF(text=bpf_text)
b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb")
print("Attached to kprobe")
b.trace_print()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After receiving sacks, tcp_shifted_skb() will collapse
skbs if possible.  tx_flags and tskey also have to be
merged.

This patch reuses the tcp_skb_collapse_tstamp() to handle
them.

BPF Output Before:
~~~~~
<no-output-due-to-missing-tstamp-event>

BPF Output After:
~~~~~
<...>-2024  [007] d.s.    88.644374: : ee_data:14599

Packetdrill Script:
~~~~~
+0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
+0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0

0.200 write(4, ..., 1460) = 1460
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 13140) = 13140

0.200 > P. 1:1461(1460) ack 1
0.200 > . 1461:8761(7300) ack 1
0.200 > P. 8761:14601(5840) ack 1

0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop>
0.300 > P. 1:1461(1460) ack 1
0.400 < . 1:1(0) ack 14601 win 257

0.400 close(4) = 0
0.400 > F. 14601:14601(0) ack 1
0.500 < F. 1:1(0) ack 14602 win 257
0.500 > . 14602:14602(0) ack 2
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Tested-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If two skbs are merged/collapsed during retransmission, the current
logic does not merge the tx_flags and tskey.  The end result is
the SCM_TSTAMP_ACK timestamp could be missing for a packet.

The patch:
1. Merge the tx_flags
2. Overwrite the prev_skb's tskey with the next_skb's tskey

BPF Output Before:
~~~~~~
<no-output-due-to-missing-tstamp-event>

BPF Output After:
~~~~~~
packetdrill-2092  [001] d.s.   453.998486: : ee_data:1459

Packetdrill Script:
~~~~~~
+0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
+0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0

0.200 write(4, ..., 730) = 730
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 730) = 730
+0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0
0.200 write(4, ..., 11680) = 11680
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0

0.200 > P. 1:731(730) ack 1
0.200 > P. 731:1461(730) ack 1
0.200 > . 1461:8761(7300) ack 1
0.200 > P. 8761:13141(4380) ack 1

0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop>
0.300 > P. 1:1461(1460) ack 1
0.400 < . 1:1(0) ack 13141 win 257

0.400 close(4) = 0
0.400 > F. 13141:13141(0) ack 1
0.500 < F. 1:1(0) ack 13142 win 257
0.500 > . 13142:13142(0) ack 2
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Tested-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cpsw_ndo_open() could try to access CPSW registers before
calling pm_runtime_get_sync(). This will trigger L3 error:

 WARNING: CPU: 0 PID: 21 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c()
 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_FAST (Idle): Data Access in Supervisor mode during Functional access

and CPSW will stop functioning.

Hence, fix it by moving pm_runtime_get_sync() before the first access
to CPSW registers in cpsw_ndo_open().
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received,
it could incorrectly think that a skb has already
been acked and queue a SCM_TSTAMP_ACK cmsg to the
sk->sk_error_queue.

In tcp_ack_tstamp(), it checks
'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'.
If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill
script, between() returns true but the tskey is actually not acked.
e.g. try between(3, 2, 1).

The fix is to replace between() with one before() and one !before().
By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be
removed.

A packetdrill script is used to reproduce the dup ack scenario.
Due to the lacking cmsg support in packetdrill (may be I
cannot find it),  a BPF prog is used to kprobe to
sock_queue_err_skb() and print out the value of
serr->ee.ee_data.

Both the packetdrill and the bcc BPF script is attached at the end of
this commit message.

BPF Output Before Fix:
~~~~~~
      <...>-2056  [001] d.s.   433.927987: : ee_data:1459  #incorrect
packetdrill-2056  [001] d.s.   433.929563: : ee_data:1459  #incorrect
packetdrill-2056  [001] d.s.   433.930765: : ee_data:1459  #incorrect
packetdrill-2056  [001] d.s.   434.028177: : ee_data:1459
packetdrill-2056  [001] d.s.   434.029686: : ee_data:14599

BPF Output After Fix:
~~~~~~
      <...>-2049  [000] d.s.   113.517039: : ee_data:1459
      <...>-2049  [000] d.s.   113.517253: : ee_data:14599

BCC BPF Script:
~~~~~~
#!/usr/bin/env python

from __future__ import print_function
from bcc import BPF

bpf_text = """
#include <uapi/linux/ptrace.h>
#include <net/sock.h>
#include <bcc/proto.h>
#include <linux/errqueue.h>

#ifdef memset
#undef memset
#endif

int trace_err_skb(struct pt_regs *ctx)
{
	struct sk_buff *skb = (struct sk_buff *)ctx->si;
	struct sock *sk = (struct sock *)ctx->di;
	struct sock_exterr_skb *serr;
	u32 ee_data = 0;

	if (!sk || !skb)
		return 0;

	serr = SKB_EXT_ERR(skb);
	bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data);
	bpf_trace_printk("ee_data:%u\\n", ee_data);

	return 0;
};
"""

b = BPF(text=bpf_text)
b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb")
print("Attached to kprobe")
b.trace_print()

Packetdrill Script:
~~~~~~
+0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
+0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0

+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 1460) = 1460
0.200 write(4, ..., 13140) = 13140

0.200 > P. 1:1461(1460) ack 1
0.200 > . 1461:8761(7300) ack 1
0.200 > P. 8761:14601(5840) ack 1

0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop>
0.300 > P. 1:1461(1460) ack 1
0.400 < . 1:1(0) ack 14601 win 257

0.400 close(4) = 0
0.400 > F. 14601:14601(0) ack 1
0.500 < F. 1:1(0) ack 14602 win 257
0.500 > . 14602:14602(0) ack 2
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil.kdev@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Tested-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the IPv6 counterpart to commit 8282f274 ("inet: frag: Always
orphan skbs inside ip_defrag()").

Prior to commit 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free
clone operations"), ipv6 fragments sent to nf_ct_frag6_gather() would be
cloned (implicitly orphaning) prior to queueing for reassembly. As such,
when the IPv6 message is eventually reassembled, the skb->sk for all
fragments would be NULL. After that commit was introduced, rather than
cloning, the original skbs were queued directly without orphaning. The
end result is that all frags except for the first and last may have a
socket attached.

This commit explicitly orphans such skbs during nf_ct_frag6_gather() to
prevent BUG_ON(skb->sk) during a later call to ip6_fragment().

kernel BUG at net/ipv6/ip6_output.c:631!
[...]
Call Trace:
 <IRQ>
 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
 [<ffffffffa042c7c0>] ? do_output.isra.28+0x1b0/0x1b0 [openvswitch]
 [<ffffffff810bb8a2>] ? __lock_is_held+0x52/0x70
 [<ffffffffa042c587>] ovs_fragment+0x1f7/0x280 [openvswitch]
 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50
 [<ffffffff81697ea0>] ? dst_discard_out+0x20/0x20
 [<ffffffff81697e80>] ? dst_ifdown+0x80/0x80
 [<ffffffffa042c703>] do_output.isra.28+0xf3/0x1b0 [openvswitch]
 [<ffffffffa042d279>] do_execute_actions+0x709/0x12c0 [openvswitch]
 [<ffffffffa04340a4>] ? ovs_flow_stats_update+0x74/0x1e0 [openvswitch]
 [<ffffffffa04340d1>] ? ovs_flow_stats_update+0xa1/0x1e0 [openvswitch]
 [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40
 [<ffffffffa042de75>] ovs_execute_actions+0x45/0x120 [openvswitch]
 [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch]
 [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40
 [<ffffffffa042def4>] ovs_execute_actions+0xc4/0x120 [openvswitch]
 [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch]
 [<ffffffffa04337f2>] ? key_extract+0x442/0xc10 [openvswitch]
 [<ffffffffa043b26d>] ovs_vport_receive+0x5d/0xb0 [openvswitch]
 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50
 [<ffffffffa043c11d>] internal_dev_xmit+0x6d/0x150 [openvswitch]
 [<ffffffffa043c0b5>] ? internal_dev_xmit+0x5/0x150 [openvswitch]
 [<ffffffff8168fb5f>] dev_hard_start_xmit+0x2df/0x660
 [<ffffffff8168f5ea>] ? validate_xmit_skb.isra.105.part.106+0x1a/0x2b0
 [<ffffffff81690925>] __dev_queue_xmit+0x8f5/0x950
 [<ffffffff81690080>] ? __dev_queue_xmit+0x50/0x950
 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
 [<ffffffff81690990>] dev_queue_xmit+0x10/0x20
 [<ffffffff8169a418>] neigh_resolve_output+0x178/0x220
 [<ffffffff81752759>] ? ip6_finish_output2+0x219/0x7b0
 [<ffffffff81752759>] ip6_finish_output2+0x219/0x7b0
 [<ffffffff817525a5>] ? ip6_finish_output2+0x65/0x7b0
 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80
 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50
 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50
 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40
 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0
 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0
 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50
 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80
 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0
 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50
 [<ffffffff817796cc>] icmpv6_push_pending_frames+0xac/0xe0
 [<ffffffff8177a4be>] icmpv6_echo_reply+0x42e/0x500
 [<ffffffff8177acbf>] icmpv6_rcv+0x4cf/0x580
 [<ffffffff81755ac7>] ip6_input_finish+0x1a7/0x690
 [<ffffffff81755925>] ? ip6_input_finish+0x5/0x690
 [<ffffffff817567a0>] ip6_input+0x30/0xa0
 [<ffffffff81755920>] ? ip6_rcv_finish+0x1a0/0x1a0
 [<ffffffff817557ce>] ip6_rcv_finish+0x4e/0x1a0
 [<ffffffff8175640f>] ipv6_rcv+0x45f/0x7c0
 [<ffffffff81755fe6>] ? ipv6_rcv+0x36/0x7c0
 [<ffffffff81755780>] ? ip6_make_skb+0x1c0/0x1c0
 [<ffffffff8168b649>] __netif_receive_skb_core+0x229/0xb80
 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
 [<ffffffff8168c07f>] ? process_backlog+0x6f/0x230
 [<ffffffff8168bfb6>] __netif_receive_skb+0x16/0x70
 [<ffffffff8168c088>] process_backlog+0x78/0x230
 [<ffffffff8168c0ed>] ? process_backlog+0xdd/0x230
 [<ffffffff8168db43>] net_rx_action+0x203/0x480
 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
 [<ffffffff817c156e>] __do_softirq+0xde/0x49f
 [<ffffffff81752768>] ? ip6_finish_output2+0x228/0x7b0
 [<ffffffff817c070c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff8106f88b>] do_softirq.part.18+0x3b/0x40
 [<ffffffff8106f946>] __local_bh_enable_ip+0xb6/0xc0
 [<ffffffff81752791>] ip6_finish_output2+0x251/0x7b0
 [<ffffffff81754af1>] ? ip6_fragment+0xba1/0xc50
 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80
 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50
 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50
 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40
 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0
 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0
 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50
 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80
 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0
 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50
 [<ffffffff81778558>] rawv6_sendmsg+0xa28/0xe30
 [<ffffffff81719097>] ? inet_sendmsg+0xc7/0x1d0
 [<ffffffff817190d6>] inet_sendmsg+0x106/0x1d0
 [<ffffffff81718fd5>] ? inet_sendmsg+0x5/0x1d0
 [<ffffffff8166d078>] sock_sendmsg+0x38/0x50
 [<ffffffff8166d4d6>] SYSC_sendto+0xf6/0x170
 [<ffffffff8100201b>] ? trace_hardirqs_on_thunk+0x1b/0x1d
 [<ffffffff8166e38e>] SyS_sendto+0xe/0x10
 [<ffffffff817bebe5>] entry_SYSCALL_64_fastpath+0x18/0xa8
Code: 06 48 83 3f 00 75 26 48 8b 87 d8 00 00 00 2b 87 d0 00 00 00 48 39 d0 72 14 8b 87 e4 00 00 00 83 f8 01 75 09 48 83 7f 18 00 74 9a <0f> 0b 41 8b 86 cc 00 00 00 49 8#
RIP  [<ffffffff8175468a>] ip6_fragment+0x73a/0xc50
 RSP <ffff880072803120>

Fixes: 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free clone
operations")
Reported-by: NDaniele Di Proietto <diproiettod@vmware.com>
Signed-off-by: NJoe Stringer <joe@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM fixes from Russell King:
 "Three further fixes for ARM.

  Alexandre Courbot was having problems with DMA allocations with the
  GFP flags affecting where the tracking data was being allocated from.
  Vladimir Murzin noticed that the CPU feature code was not entirely
  correct, which can cause some features to be misreported"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8564/1: fix cpu feature extracting helper
  ARM: 8563/1: fix demoting HWCAP_SWP
  ARM: 8551/2: DMA: Fix kzalloc flags in __dma_alloc

Pull fbdev fixes from Tomi Valkeinen:

 - ARM CLCD: fix regression on multiplatform kernels

 - panel-sharp-ls037v7dw01: fix possible NULL deref

* tag 'fbdev-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  omapfb: panel-sharp-ls037v7dw01: fix check of gpio_to_desc() return value
  video: ARM CLCD: runtime check for Versatile

Merge tag 'platform-drivers-x86-v4.6-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "An S4 fix for intel-hid, new platform 'quirk' for hp_accel, a fix for
  broader support of ACPI resources for the Intel P-unit, and a few
  uninitialized variable fixes.

  intel p-unit:
   - decouple telemetry driver from the optional IPC resources

  thinkpad_acpi:
   - Silence an uninitialized variable warning

  intel_telemetry_pltdrv:
   - Silence an uninitialized variable warning

  hp_accel:
   - Silence an uninitialized variable warning
   - Add support for HP ProBook 440 G3

  intel-hid:
   - add a workaround to ignore an event after waking up from S4"

* tag 'platform-drivers-x86-v4.6-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform:x86 decouple telemetry driver from the optional IPC resources
  thinkpad_acpi: Silence an uninitialized variable warning
  intel_telemetry_pltdrv: Silence an uninitialized variable warning
  hp_accel: Silence an uninitialized variable warning
  hp_accel: Add support for HP ProBook 440 G3
  intel-hid: add a workaround to ignore an event after waking up from S4.

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Incorrect output buffer size calculation in rsa-pkcs1pad

   - Uninitialised padding bytes on exported state in ccp driver

   - Potentially freed pointer used on completion callback in sha1-mb"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccp - Prevent information leakage on export
  crypto: sha1-mb - use corrcet pointer while completing jobs
  crypto: rsa-pkcs1pad - fix dst len

This reverts commit cfe25560

This can result in a "Unable to handle kernel paging request"
during boot. This was due to using an uninitialised struct member,
data->slaves.
Signed-off-by: NAndrew Goodbody <andrew.goodbody@cambrionix.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If skb_recv_datagram returns an skb, we should ignore the err
value returned. Otherwise, datagram receives will return EAGAIN
when they have to wait for a datagram.
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb->sk could point to timewait or request socket which has no sk_classid.
Detected as "BUG: KASAN: slab-out-of-bounds in cls_cgroup_classify".
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes couple error paths after allocation failures.
Atomic set of page reference counter is safe only if it is zero,
otherwise set can race with any speculative get_page_unless_zero.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

High order pages are optional here since commit 51151a16 ("mlx4: allow
order-0 memory allocations in RX path"), so here is no reason for depleting
reserves. Generic __netdev_alloc_frag() implements the same logic.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge the ptmx internal interface cleanup branch.

This doesn't change semantics, but it should be a sane basis for
eventually getting the multi-instance devpts code into some sane shape
where we can get rid of the kernel config option.  Which we can
hopefully get done next merge window..

* ptmx-cleanup:
  devpts: clean up interface to pty drivers

Currently the optional IPC resources prevent telemetry driver from
probing if these resources are not in ACPI table. This patch decouples
telemetry driver from these optional resources, so that telemetry driver
has dependency only on the necessary ACPI resources.
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Commit b8c9592b "ARM: 8318/1: treat CPU feature register fields as signed
quantities" introduced helper to extract signed quantities of 4-bit
blocks. However, with a current code feature with value 0b1000 isn't
rejected as negative. So fix the "if" condition.
Reported-by: NJonathan Brawn <Jon.Brawn@arm.com>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>