- 10 4月, 2009 12 次提交
-
-
由 Lai Jiangshan 提交于
Impact: Cleanup These two lines: if (unlikely(*ppos)) return -ESPIPE; in tracing_buffers_splice_read() are not needed, VFS layer has disabled seek(2). We remove these two lines, and then we can update file->f_pos. And tracing_buffers_read() updates file->f_pos, this fix make tracing_buffers_splice_read() updates file->f_pos too. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D46670.4010503@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lai Jiangshan 提交于
Impact: Cleanup Sometimes, we open trace_pipe_raw, but we don't read(2) it, we just splice(2) it, thus, the page is not used. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D4666B.4010608@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lai Jiangshan 提交于
Impact: disable pread() We set tracing_buffers_fops.llseek to no_llseek, but we can still perform pread() to read this file. That is not expected. This fix uses nonseekable_open() to disable it. tracing_buffers_fops.llseek is still set to no_llseek, it mark this file is a "non-seekable device" and is used by sys_splice(). See also do_splice() or manual of splice(2): ERRORS EINVAL Target file system doesn't support splicing; neither of the descriptors refers to a pipe; or offset given for non-seekable device. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D46668.8030806@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Howells 提交于
Kill MN10300's own profiling Kconfig as this is superfluous given that the profiling options have moved to init/Kconfig and arch/Kconfig. Not only is this now superfluous, but the dependencies are not correct. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
asm-frv/pgtable.h could just #include <asm-generic/pgtable.h> in NOMMU mode rather than #defining macros for lazy MMU and CPU stuff. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
When request_key() is called, without there being any standard process keyrings on which to fall back if a destination keyring is not specified, an oops is liable to occur when construct_alloc_key() calls down_write() on dest_keyring's semaphore. Due to function inlining this may be seen as an oops in down_write() as called from request_key_and_link(). This situation crops up during boot, where request_key() is called from within the kernel (such as in CIFS mounts) where nobody is actually logged in, and so PAM has not had a chance to create a session keyring and user keyrings to act as the fallback. To fix this, make construct_alloc_key() not attempt to cache a key if there is no fallback key if no destination keyring is given specifically. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stoyan Gaydarov 提交于
Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_debug remove execute permission x86: smarten /proc/interrupts output for new counters x86: DMI match for the Dell DXP061 as it needs BIOS reboot x86: make 64 bit to use default_inquire_remote_apic x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes x86, intel-iommu: fix X2APIC && !ACPI build failure
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: consolidate documents blktrace: pass the right pointer to kfree() tracing/syscalls: use a dedicated file header tracing: append a comma to INIT_FTRACE_GRAPH
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: do not count frozen tasks toward load sched: refresh MAINTAINERS entry sched: Print sched_group::__cpu_power in sched_domain_debug cpuacct: add per-cgroup utime/stime statistics posixtimers, sched: Fix posix clock monotonicity sched_rt: don't allocate cpumask in fastpath cpuacct: make cpuacct hierarchy walk in cpuacct_charge() safe when rcupreempt is used -v2
-
由 Linus Torvalds 提交于
Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: fix wrong format string iter for printk futex: comment requeue key reference semantics * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: fix cpumask memory leak on offstack cpumask kernels * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) posix-timers: fix RLIMIT_CPU && fork() timers: add missing kernel-doc
-
由 Thomas Gleixner 提交于
Convert the last remaining users to no_irq_chip. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 4月, 2009 28 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: fix callback race dm kcopyd: prepare for callback race fix dm: implement basic barrier support dm: remove dm_request loop dm: rework queueing and suspension dm: simplify dm_request loop dm: split DMF_BLOCK_IO flag into two dm: rearrange dm_wq_work dm: remove limited barrier support dm: add integrity support
-
由 Herbert Xu 提交于
Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com> Tested-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nathan Lynch 提交于
Freezing tasks via the cgroup freezer causes the load average to climb because the freezer's current implementation puts frozen tasks in uninterruptible sleep (D state). Some applications which perform job-scheduling functions consult the load average when making decisions. If a cgroup is frozen, the load average does not provide a useful measure of the system's utilization to such applications. This is especially inconvenient if the job scheduler employs the cgroup freezer as a mechanism for preempting low priority jobs. Contrast this with using SIGSTOP for the same purpose: the stopped tasks do not count toward system load. Change task_contributes_to_load() to return false if the task is frozen. This results in /proc/loadavg behavior that better meets users' expectations. Signed-off-by: NNathan Lynch <ntl@pobox.com> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NNigel Cunningham <nigel@tuxonice.net> Tested-by: NNigel Cunningham <nigel@tuxonice.net> Cc: <stable@kernel.org> Cc: containers@lists.linux-foundation.org Cc: linux-pm@lists.linux-foundation.org Cc: Matt Helsley <matthltc@us.ibm.com> LKML-Reference: <20090408194512.47a99b95@manatee.lan> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to the new trace/ directory. I didnt find any references to those documents in both source files and documents, so no extra work needs to be done. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
It seems by mistake these files got execute permissions so removing it. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1239211186.9037.2.camel@ht.satnam> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Impact: fix kfree crash with non-standard act_mask string If passing a string with leading white spaces to strstrip(), the returned ptr != the original ptr. This bug was introduced by me. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <49DD694C.8020902@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: NTony Luck <tony.luck@intel.com> Tested-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Baron <jbaron@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Michael Davidson <md@google.com> LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: work_on_cpu(): rewrite it to create a kernel thread on demand kthread: move sched-realeted initialization from kthreadd context kthread: Don't looking for a task in create_kthread() #2
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: pda_power: Add optional OTG transceiver and voltage regulator support pcf50633_charger: Remove unused mbc_set_status function pcf50633_charger: Enable periodic charging restart
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: cap_prctl: don't set error to 0 at 'no_change'
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: igb: remove sysfs entry that was used to set the number of vfs igbvf: add new driver to support 82576 virtual functions drivers/net/eql.c: Fix a dev leakage. niu: Fix unused variable warning. r6040: set MODULE_VERSION bnx2: Don't use reserved names FEC driver: add missing #endif niu: Fix error handling mv643xx_eth: don't reset the rx coal timer on interface up smsc911x: correct debugging message on mii read timeout ethoc: fix library build errors netfilter: ctnetlink: fix regression in expectation handling netfilter: fix selection of "LED" target in netfilter netfilter: ip6tables regression fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Hook up sys_preadv and sys_pwritev sparc64: add_node_ranges() must be __init serial: sunsu: sunsu_kbd_ms_init needs to be __devinit sparc: Fix section mismatch warnings in cs4231 sound driver. sparc64: Fix section mismatch warnings in PCI controller drivers. sparc64: Fix section mismatch warnings in power driver. sparc64: get_cells() can't be marked __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: Try to avoid starting a transaction in writepage for data=writepage block_write_full_page: switch synchronous writes to use WRITE_SYNC_PLUG
-
由 Andrew Morton 提交于
Impact: circular locking bugfix The various implemetnations and proposed implemetnations of work_on_cpu() are vulnerable to various deadlocks because they all used queues of some form. Unrelated pieces of kernel code thus gained dependencies wherein if one work_on_cpu() caller holds a lock which some other work_on_cpu() callback also takes, the kernel could rarely deadlock. Fix this by creating a short-lived kernel thread for each work_on_cpu() invokation. This is not terribly fast, but the only current caller of work_on_cpu() is pci_call_probe(). It would be nice to find some other way of doing the node-local allocations in the PCI probe code so that we can zap work_on_cpu() altogether. The code there is rather nasty. I can't think of anything simple at this time... Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Oleg Nesterov 提交于
kthreadd is the single thread which implements ths "create" request, move sched_setscheduler/etc from create_kthread() to kthread_create() to improve the scalability. We should be careful with sched_setscheduler(), use _nochek helper. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Vitaliy Gusev <vgusev@openvz.org Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Vitaliy Gusev 提交于
Remove the unnecessary find_task_by_pid_ns(). kthread() can just use "current" to get the same result. Signed-off-by: NVitaliy Gusev <vgusev@openvz.org> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Mikulas Patocka 提交于
If the thread calling dm_kcopyd_copy is delayed due to scheduling inside split_job/segment_complete and the subjobs complete before the loop in split_job completes, the kcopyd callback could be invoked from the thread that called dm_kcopyd_copy instead of the kcopyd workqueue. dm_kcopyd_copy -> split_job -> segment_complete -> job->fn() Snapshots depend on the fact that callbacks are called from the singlethreaded kcopyd workqueue and expect that there is no racing between individual callbacks. The racing between callbacks can lead to corruption of exception store and it can also mean that exception store callbacks are called twice for the same exception - a likely reason for crashes reported inside pending_complete() / remove_exception(). This patch fixes two problems: 1. job->fn being called from the thread that submitted the job (see above). - Fix: hand over the completion callback to the kcopyd thread. 2. job->fn(read_err, write_err, job->context); in segment_complete reports the error of the last subjob, not the union of all errors. - Fix: pass job->write_err to the callback to report all error bits (it is done already in run_complete_job) Cc: stable@kernel.org Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Use a variable in segment_complete() to point to the dm_kcopyd_client struct and only release job->pages in run_complete_job() if any are defined. These changes are needed by the next patch. Cc: stable@kernel.org Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Barriers are submitted to a worker thread that issues them in-order. The thread is modified so that when it sees a barrier request it waits for all pending IO before the request then submits the barrier and waits for it. (We must wait, otherwise it could be intermixed with following requests.) Errors from the barrier request are recorded in a per-device barrier_error variable. There may be only one barrier request in progress at once. For now, the barrier request is converted to a non-barrier request when sending it to the underlying device. This patch guarantees correct barrier behavior if the underlying device doesn't perform write-back caching. The same requirement existed before barriers were supported in dm. Bottom layer barrier support (sending barriers by target drivers) and handling devices with write-back caches will be done in further patches. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Remove queue_io return value and a loop in dm_request. IO may be submitted to a worker thread with queue_io(). queue_io() sets DMF_QUEUE_IO_TO_THREAD so that all further IO is queued for the thread. When the thread finishes its work, it clears DMF_QUEUE_IO_TO_THREAD and from this point on, requests are submitted from dm_request again. This will be used for processing barriers. Remove the loop in dm_request. queue_io() can submit I/Os to the worker thread even if DMF_QUEUE_IO_TO_THREAD was not set. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Rework shutting down on suspend and document the associated rules. Drop write lock in __split_and_process_bio to allow more processing concurrency. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Refactor the code in dm_request(). Require the new DMF_BLOCK_FOR_SUSPEND flag on readahead bios we will discard so we don't drop such bios while processing a barrier. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Split the DMF_BLOCK_IO flag into two. DMF_BLOCK_IO_FOR_SUSPEND is set when I/O must be blocked while suspending a device. DMF_QUEUE_IO_TO_THREAD is set when I/O must be queued to a worker thread for later processing. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Refactor dm_wq_work() to make later patch more readable. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Prepare for full barrier implementation: first remove the restricted support. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Martin K. Petersen 提交于
This patch provides support for data integrity passthrough in the device mapper. - If one or more component devices support integrity an integrity profile is preallocated for the DM device. - If all component devices have compatible profiles the DM device is flagged as capable. - Handle integrity metadata when splitting and cloning bios. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Serge E. Hallyn 提交于
One-liner: capsh --print is broken without this patch. In certain cases, cap_prctl returns error > 0 for success. However, the 'no_change' label was always setting error to 0. As a result, for example, 'prctl(CAP_BSET_READ, N)' would always return 0. It should return 1 if a process has N in its bounding set (as by default it does). I'm keeping the no_change label even though it's now functionally the same as 'error'. Signed-off-by: NSerge Hallyn <serue@us.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Alexander Duyck 提交于
This patch removes the sysfs entry num_vfs which was added to support enabling pci virtual functions for 82576. To prevent VFs from loading automatically a module parameter "max_vfs" was added so that the number of VFs per PF can be limited. This is especially useful when 4 or more 82576 ports are on the system because otherwise to load all VFs would result in 8 interface per physical port. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-