- 18 12月, 2012 2 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 12月, 2012 5 次提交
-
-
由 Cyril Roelandt 提交于
Found using the following semantic patch: <spml> @@ @@ spin_lock_irqsave(...); ... when != spin_unlock_irqrestore(...); * GFP_KERNEL </spml> Signed-off-by: NCyril Roelandt <tipecaml@gmail.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
sh-vou causes several "may be used uninitialized" warnings. Even though they all are purely theoretical, it is better to fix them. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Anatolij Gustschin 提交于
Sometimes VIDIOC_S_CROP ioctl doesn't work, soc-camera driver reports: soc-camera-pdrv soc-camera-pdrv.0: S_CROP denied: getting current crop failed The VIDIOC_G_CROP documentation states that the type field needs to be set to the respective buffer type when querying, so the check in .g_crop() of the subdevices returns -EINVAL if the type is not set properly. Here the uninitialized local variable 'current_crop' is passed to the .g_crop() and this leads to the observed error. Initialize the type field of the local 'current_crop' before get_crop call. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Julian Scheel 提交于
On systems where it cannot be assured that enough continous memory is available all the time it can be very useful to only allocate the memory once when it is needed the first time. Afterwards the initially allocated memory will be reused, so it is ensured that the memory will stay available until the driver is unloaded. [mchehab@redhat.com: Codingstyle fixups] Signed-off-by: NJulian Scheel <julian@jusst.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Rémi Cardona 提交于
Signed-off-by: NRémi Cardona <remi.cardona@smartjog.com> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 28 11月, 2012 21 次提交
-
-
由 Laurent Pinchart 提交于
Drivers must not rely on cpu_is_omap* macros (they will soon become private). Use the ISP revision instead to identify the hardware. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Clock enable (disable) is split in two operations, prepare and enable (disable and unprepare). Perform both when enabling/disabling the ISP clocks. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Support both grayscale (Y8) and Bayer (SBGGR8, SGBRG8, SGRBG8 and SRGGB8) formats. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Use the dev_* message logging API instead of raw printk. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
No longer assume pad number 0 is the source pad of the external entity. Find the source pad from the external entity and use it instead. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Configure CSI-2 phy based on platform data in the ISP driver. For that, the new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same was configured from the board code. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add PHY routing configuration for both 3430 and 3630. Also add register bit definitions of CSIRXFE and CAMERA_PHY_CTRL registers on OMAP 3430 and 3630, respectively. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Add the registers used to configure the CSI-2 receiver PHY on OMAP3430 and 3630 and map them in the ISP driver. The register is part of the control block but it only is needed by the ISP driver. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The OMAP3ISP_*_REG_OFFSET, OMAP3ISP_*_REG_BASE and OMAP3ISP_*_REG macros are not needed. Remove them. The only exception is the OMAP3ISP_HIST_REG_BASE address. Replace it with the memory address received through platform resources. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
V4L2 buffers use the monotonic clock, while statistics buffers use wall time. This makes it difficult to correlate video frames and statistics. Switch statistics buffers to the monotonic clock to fix this. Reported-by: NAntoine Reversat <a.reversat@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
V4L2 integer controls are stored in signed 32-bit values. However, UVC controls can be either signed or unsigned. Take the UVC control signedness into account when clamping the control value to the min-max range. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The MEDIA_ENT_FL_DEFAULT identifies entities that are considered as default for their group and type. For video nodes, it identifies the node that application should use by default. UVC devices don't report which output terminal should be considered as the default, use the first one. Most devices have a single output terminal anyway. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The proper error code is -ENOTTY instead of -EINVAL. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Set the capabilities field to global capabilities, and the device_caps field to the video node capabilities. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Return the default format in that case. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The proper return code according to the V4L2 specification is -EACCES, not -EINVAL. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
When one of the requested controls doesn't exist the error_idx field must reflect that situation. For G_EXT_CTRLS and S_EXT_CTRLS, error_idx must be set to the control count. For TRY_EXT_CTRLS, it must be set to the index of the unexisting control. This issue was found by the v4l2-compliance tool. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Juergen Lock 提交于
This just adds the usbid to the rtl28xxu driver, that's all that's needed to make the stick work for DVB. Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
It was a bad idea, as comment also says, to write some "don't care" registers as 0xff value. Fix it. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series camera interface. The driver exposes a subdev device node for CAMIF pixel resolution and crop control and two video capture nodes - for the "codec" and "preview" data paths. It has been tested on Mini2440 (s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer. Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com> Signed-off-by: NAndrey Gusakov <dron0gus@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 11月, 2012 9 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The right solution is to remove the architecture dependency on dma_common_get_sgtable(). Revert this patch to apply the right one. This reverts commit 93049b93.
-
由 Arun Kumar K 提交于
When one input buffer has multiple frames, it should be fed again to the hardware with the remaining bytes. Removed the check for P frame in this scenario as this condition can come with all frame types. Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Signed-off-by: NARUN MANKUZHI <arun.m@samsung.com> Acked-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Arun Kumar K 提交于
Modified the function s5p_mfc_get_dec_y_adr_v6 to access the decode Y address register instead of display Y address. Signed-off-by: NSunil Mazhavanchery <sunilm@samsung.com> Signed-off-by: NArun Kumar K <arun.kk@samsung.com> Acked-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
vfl_dir should be set to VFL_DIR_M2M so valid ioctls for this mem-to-mem device can be properly determined in the v4l2 core. Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Shaik Ameer Basha 提交于
Macros used to set input and output RGB type aren't correct. Updating the macros as per register manual. Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. This patch is required for stable kernels v3.5+. Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this caused driver resources not to be released. Not releasing the buffer queue also prevented other drivers to free memory, e.g. in MMAP -> USERPTR scenario. This patch is required for stable kernels v3.6+. Reported-by: NKamil Debski <k.debski@samsung.com> Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Make sure when fimc and fimc-lite capture video node is registered it has valid pipeline_ops assigned to it. Otherwise when a video node is opened right after is was registered there, might be an attempt to use ops that are just being assigned, after function v4l2_device_register_subdev() returns. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 11月, 2012 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As reported by Stephen: > After merging the v4l-dvb tree, today's linux-next build (x86_64 > allmodconfig) failed like this: > > ERROR: "dma_common_get_sgtable" [drivers/media/v4l2-core/videobuf2-dma-contig.ko] undefined! > > Caused by commit 9ef2cbeb ("[media] v4l: vb2-dma-contig: add support > for DMABUF exporting"). dma_common_get_sgtable() is called from the > inline dma_get_sgtable_attrs() and dma_get_sgtable_attrs() is "called > from" dma_get_sgtable(). dma_common_get_sgtable() is only defined if > ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY is set which depends on > CONFIG_HAVE_GENERIC_DMA_COHERENT being set which it isn't for this build. The simplest fix is to just not support DMABUF with vb2-contig, on archs where this symbol doesn't exist. Some latter patch can rewrite it to support this outside -arm. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch enhances s5p-mfc with support for DMABUF exporting via VIDIOC_EXPBUF ioctl. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch enhances s5p-tv with support for DMABUF exporting via VIDIOC_EXPBUF ioctl. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-