This allows us to query certain registers from userspace
for profiling and harvest configuration.  E.g., it can
be used by the GALLIUM_HUD for profiling the status of
various gfx blocks.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow the UMDs to query the current sclk/mclk
for profiling, etc.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Useful for profiling.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If acceleration is disabled, it does not make sense
to init gpuvm since nothing will use it.  Moreover,
if radeon_vm_init() gets called it uses accel to try
and clear the pde tables, etc. which results in a bug.

v2: handle vm_fini as well
v3: handle bo_open/close as well

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=88786Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

I was unable too boot 3.18.0-rc6 because of the following kernel
panic in drm_calc_vbltimestamp_from_scanoutpos():

    [drm] Initialized drm 1.1.0 20060810
    [drm] radeon kernel modesetting enabled.
    [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080).
    [drm] register mmio base: 0xC8400000
    [drm] register mmio size: 65536
    radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
    radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
    [drm] Detected VRAM RAM=128M, BAR=128M
    [drm] RAM width 16bits DDR
    [TTM] Zone  kernel: Available graphics memory: 3829346 kiB
    [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
    [TTM] Initializing pool allocator
    [TTM] Initializing DMA pool allocator
    [drm] radeon: 16M of VRAM memory ready
    [drm] radeon: 512M of GTT memory ready.
    [drm] GART: num cpu pages 131072, num gpu pages 131072
    [drm] PCI GART of 512M enabled (table at 0x0000000037880000).
    radeon 0000:0b:01.0: WB disabled
    radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000
    [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [drm] Driver supports precise vblank timestamp query.
    [drm] radeon: irq initialized.
    [drm] Loading R100 Microcode
    radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2
    radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
    [drm:r100_cp_init] *ERROR* Failed to load firmware!
    radeon 0000:0b:01.0: failed initializing CP (-2).
    radeon 0000:0b:01.0: Disabling GPU acceleration
    [drm] radeon: cp finalized
    BUG: unable to handle kernel NULL pointer dereference at 000000000000025c
    IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320
    PGD 0
    Oops: 0000 [#1] SMP
    Modules linked in:
    CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649
    Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006
    task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000
    RIP: 0010:[<ffffffff8150423b>]  [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320
    RSP: 0000:ffff880234da7918  EFLAGS: 00010086
    RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48
    RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000
    RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000
    R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0
    R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000
    FS:  0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0
    Stack:
     ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480
     ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d
     ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58
    Call Trace:
     [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110
     [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60
     [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180
     [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70
     [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0
     [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70
     [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0
     [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70
     [<ffffffff8156c07e>] r100_init+0x26e/0x410
     [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50
     [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210
     [<ffffffff81506965>] drm_dev_register+0xb5/0x110
     [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200
     [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0
     [<ffffffff8141a365>] local_pci_probe+0x45/0xa0
     [<ffffffff8141b741>] pci_device_probe+0xd1/0x130
     [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0
     [<ffffffff8163413b>] __driver_attach+0x9b/0xa0
     [<ffffffff816340a0>] ? __device_attach+0x40/0x40
     [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0
     [<ffffffff8163378e>] driver_attach+0x1e/0x20
     [<ffffffff81633390>] bus_add_driver+0x180/0x240
     [<ffffffff81634914>] driver_register+0x64/0xf0
     [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50
     [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120
     [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a
     [<ffffffff821dc908>] radeon_init+0x97/0xb5
     [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0
     [<ffffffff810e3278>] ? __wake_up+0x48/0x60
     [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215
     [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0
     [<ffffffff818a78f0>] ? rest_init+0x80/0x80
     [<ffffffff818a78fe>] kernel_init+0xe/0xf0
     [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0
     [<ffffffff818a78f0>] ? rest_init+0x80/0x80
    Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60
    RIP  [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320
     RSP <ffff880234da7918>
    CR2: 000000000000025c
    ---[ end trace ad2c0aadf48e2032 ]---
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

It has helped me to add a NULL pointer check that was suggested at
http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html

I am not familiar with the code. But the change looks sane
and we need something fast at this stage of 3.18 development.
Suggested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NPetr Mladek <pmladek@suse.cz>
Tested-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

That's useless when all callers drop the reservation
immediately after calling the function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds an IOCTL for turning a pointer supplied by
userspace into a buffer object.

It imposes several restrictions upon the memory being mapped:

1. It must be page aligned (both start/end addresses, i.e ptr and size).

2. It must be normal system memory, not a pointer into another map of IO
space (e.g. it must not be a GTT mmapping of another object).

3. The BO is mapped into GTT, so the maximum amount of memory mapped at
all times is still the GTT limit.

4. The BO is only mapped readonly for now, so no write support.

5. List of backing pages is only acquired once, so they represent a
snapshot of the first use.

Exporting and sharing as well as mapping of buffer objects created by
this function is forbidden and results in an -EPERM.

v2: squash all previous changes into first public version
v3: fix tabs, map readonly, don't use MM callback any more
v4: set TTM_PAGE_FLAG_SG so that TTM never messes with the pages,
    pin/unpin pages on bind/unbind instead of populate/unpopulate
v5: rebased on 3.17-wip, IOCTL renamed to userptr, reject any unknown
    flags, better handle READONLY flag, improve permission check
v6: fix ptr cast warning, use set_page_dirty/mark_page_accessed on unpin
v7: add warning about it's availability in the API definition
v8: drop access_ok check, fix VM mapping bits
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v4)
Reviewed-by: Jérôme Glisse <jglisse@redhat.com> (v4)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Adjust the previous tweak for hawaii to return 3 if the new firmware is used.
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Return 2 so we can be sure the kernel has the necessary
changes for acceleration to work.

Note: This patch depends on these two commits:
 - drm/radeon: fix cut and paste issue for hawaii.
 - drm/radeon: use packet2 for nop on hawaii with old firmware
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Cc: stable@vger.kernel.org

Calling radeon_vm_bo_find on the IB BO during CS
is illegal and can lead to an crash.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds the interface between the radeon driver and the amdkfd driver.
The interface implementation is contained in radeon_kfd.c and radeon_kfd.h.

The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside radeon_device structure.

All the register accesses that amdkfd need are done using this interface. This
allows us to avoid direct register accesses in amdkfd proper,  while also
avoiding locking between amdkfd and radeon.

The single exception is the doorbells that are used in both of the drivers.
However, because they are located in separate pci bar pages, the danger of
sharing registers between the drivers is minimal.

Having said that, we are planning to move the doorbells as well to radeon.

v3:

Add interface for sa manager init and fini. The init function will allocate a
buffer on system memory and pin it to the GART address space via the radeon sa
manager.

All mappings of buffers to GART address space are done via the radeon sa
manager. The interface of allocate memory will use the radeon sa manager to sub
allocate from the single buffer that was allocated during the init function.

Change lower_32/upper_32 calls to use linux macros

Add documentation for the interface

v4:

Change ptr field type in kgd_mem from uint32_t* to void* to match to type that
is returned by radeon_sa_bo_cpu_addr

v5:

Change format of mqd structure to work with latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Move generic kfd-->kgd interface and other generic kgd definitions to a generic
header file that will be used by AMD's radeon and amdgpu drivers
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I cannot see a need to provide a DRM_ version of ARRAY_SIZE(), only used
in a few places. I suspect its usage has been spread by copy & paste
rather than anything else.

Let's just remove it for plain ARRAY_SIZE().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When accel is not working on device with virtual address space radeon
segfault because the ib buffer is NULL and trying to map it inside the
virtual address space trigger segfault. This patch only map the ib
buffer if accel is working.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

vgaswitcheroo and the ATPX ACPI methods are required to
power down the dGPU.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73901Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

On bo reservation failure, we end up leaking fpriv.

v2 (chk): rebased and added missing free on vm failure as well

Fixes: 5e386b57 ("drm/radeon: fix missing bo reservation")
Cc: stable@vger.kernel.org
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Don't try and runtime suspend the APU in PX systems.  We
only want to power down the dGPU.

v2: fix harder
v3: fix stupid typo
v4: consolidate runpm enablement to a single flag

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=75127
https://bugzilla.kernel.org/show_bug.cgi?id=72701Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Not sure why git didn't flag this, but the result of automerge
from 3.14-rc7 screwed up the radeon init procedure.

Reported-by: Fireburn on #radeon
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make sure runtime pm is disabled on non-PX hardware.
Should fix powerdown problems without displays attached.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

No need to make it more complicated than necessary,
just allocate the page tables as normal BO and
flush whenever the address change.

v2: update comments and function name
v3: squash bug fixes, page directory and tables patch
v4: rebased on Mareks changes
Signed-off-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>

The statistics are:
- VRAM usage in bytes
- GTT usage in bytes
- number of bytes moved by TTM

The last one is actually a counter, so you need to sample it before and after
command submission and take the difference.

This is useful for finding performance bottlenecks. Userspace queries are
also added.

v2: use atomic64_t
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

When passing buffers between processes, the receiving process needs to know
the original buffer domain, so that it doesn't accidentally move the buffer.

v2: reserve the buffer
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Otherwise we might get a crash here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also make the result available to userspace.
Signed-off-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>

Only VCE 2.0 support so far.

v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
    basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: NChristian König <christian.koenig@amd.com>

This is needed for reporting the max GPU engine clock
in OpenCL.  This just reports the max possible engine
clock, it does not take into account current conditions
that may limit that clock.

v2: fix query number for merge with 3.13
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than using crtc->hwmode, just pass the relevant mode to
drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode
usage from core drm.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Add static keyword to the definition of KMS_INVALID_IOCTL(name) in
radeon_kms.c because the functions passed to it as arguments are not
used anywhere else.

This eliminates the following warnings in drm/radeon/radeon_kms.c:
drivers/gpu/drm/radeon/radeon_kms.c:719:1: warning: no previous prototype for ‘radeon_cp_init_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:720:1: warning: no previous prototype for ‘radeon_cp_start_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:721:1: warning: no previous prototype for ‘radeon_cp_stop_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:722:1: warning: no previous prototype for ‘radeon_cp_reset_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:723:1: warning: no previous prototype for ‘radeon_cp_idle_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:724:1: warning: no previous prototype for ‘radeon_cp_resume_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:725:1: warning: no previous prototype for ‘radeon_engine_reset_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:726:1: warning: no previous prototype for ‘radeon_fullscreen_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:727:1: warning: no previous prototype for ‘radeon_cp_swap_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:728:1: warning: no previous rototype for ‘radeon_cp_clear_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:729:1: warning: no previous prototype for ‘radeon_cp_vertex_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:730:1: warning: no previous rototype for ‘radeon_cp_indices_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:731:1: warning: no previous prototype for ‘radeon_cp_texture_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:732:1: warning: no previous prototype for ‘radeon_cp_stipple_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:733:1: warning: no previous prototype for ‘radeon_cp_indirect_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:734:1: warning: no previous prototype for ‘radeon_cp_vertex2_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:735:1: warning: no previous prototype for ‘radeon_cp_cmdbuf_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:736:1: warning: no previous prototype for ‘radeon_cp_getparam_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:737:1: warning: no previous prototype for ‘radeon_cp_flip_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:738:1: warning: no previous prototype for ‘radeon_mem_alloc_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:739:1: warning: no previous prototype for ‘radeon_mem_free_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:740:1: warning: no previous rototype for ‘radeon_mem_init_heap_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:741:1: warning: no previous rototype for ‘radeon_irq_emit_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:742:1: warning: no previous prototype for ‘radeon_irq_wait_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:743:1: warning: no previous rototype for ‘radeon_cp_setparam_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:744:1: warning: no previous prototype for ‘radeon_surface_alloc_kms’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_kms.c:745:1: warning: no previous prototype for ‘radeon_surface_free_kms’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Mark function radeon_info_ioctl() as static in drm/radeon/radeon_kms.c
because it is not used outside this file.

This eliminates the following warning in drm/radeon/radeon_kms.c:
drivers/gpu/drm/radeon/radeon_kms.c:194:5: warning: no previous prototype for ‘radeon_info_ioctl’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow userspace to correctly program the PA_SC_RASTER_CONFIG
register, so it can be considered a fix.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Less yelling ftw!
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is required to properly calculate the tiling parameters
in userspace.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required to properly calculate the tiling parameters
in userspace.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This hooks radeon up to the runtime PM system to enable
dynamic power management for secondary GPUs in switchable
and powerxpress laptops.

v2: agd5f: clean up, add module parameter
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can get the PCI vendor and device IDs via dev->pdev. So we can drop
the duplicated information.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Also add a new RADEON_INFO query to check that CP DMA packets are
supported on the compute ring.

CP DMA has been supported since the 3.8 kernel, but due to an oversight
we forgot to teach the CS checker that the CP DMA packet was legal for
the compute ring on Southern Islands GPUs.

This patch fixes a bug where the radeon driver will incorrectly reject a legal
CP DMA packet from user space.  I would like to have the patch
backported to stable so that we don't have to require Mesa users to use a
bleeding edge kernel in order to take advantage of this feature which
is already present in the stable kernels (3.8 and newer).

v2:
  - Don't bump kms version, so this patch can be backported to stable
    kernels.

Cc: stable@vger.kernel.org
Signed-off-by: NTom Stellard <thomas.stellard@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Again, it does nothing.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>