- 27 6月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
The very same notifier code is used in both hda_intel.c and hda_tegra.c. Move it to the generic code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
... and move most parts into hda_intel.c from the generic controller code. This is a clean up, and there should be no functional change by this patch. Now, struct azx obtains the generic callbacks for getting the position and the delay. As default NULL, posbuf is read. These replace the old position_fix[], and each is implemented as a callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Pass the codec object so that we can replace all the rest of snd_print*() usages with the proper device-specific print helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 4月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
The recent commit (ca460f86) changed the CORB RP reset procedure to follow the specification with a couple of sanity checks. Unfortunately, Nvidia controller chips seem not following this way, and spew the warning messages like: snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0 This patch adds the workaround for such chips. It just skips the new reset procedure for the known broken chips. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 4月, 2014 2 次提交
-
-
由 Thierry Reding 提交于
The full_reset argument to azx_init_chip() carries boolean rather than numerical information, so update the type to reflect that. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
From azx_interrupt, use the helper to check if the device is active instead of checking the state. This will do the right thing if runtime pm is disabled in addition to if the device is suspended. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 4月, 2014 1 次提交
-
-
由 Anssi Hannula 提交于
Currently stream numbers are assigned in reverse order. Unfortunately commit 7546abfb ("ALSA: hda - Increment default stream numbers for AMD HDMI controllers") assumed this was not the case (specifically, it had the "old cards had single device only" => "extra unused stream numbers do not matter" assumption), causing non-working audio regressions for AMD Radeon HDMI users. Change the stream numbers to be assigned in forward order. The benefit is that regular audio playback will still work even if the assumed stream count is too high, downside is that a too high stream count may remain hidden. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002Reported-by: NChristian Güdel <cg@dmesg.ch> Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Tested-by: Christian Güdel <cg@dmesg.ch> # 3.14 Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 3月, 2014 1 次提交
-
-
由 Dylan Reid 提交于
It is only used in hda_controller.c now. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 3月, 2014 8 次提交
-
-
由 Dylan Reid 提交于
Codec creation and stream initialization can be shared between hda_intel and hda platform drivers. Move it and the static functions it depends on to hda_controller.c. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
This code will be reused by an hda_platform driver as it has no PCI dependencies. This allows update_rirb to be static as all users are now in hda_controller.c. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Share more code from hda_intel. This moves the link control and initialization to hda_controller. The code will also be used by an hda platform driver. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Combining the call to alloc_cmd_io with the allocate pages function removes an extra interface between hda_intel and hda_controller. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
This is done to allow an HDA platform driver to reuse the code. A few of the interfaces added to hda_controller will disappear in following commits as their users are also moved to hda_controller. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Moving the DSP loading functionality to hda_controller.c means that the dsp lock doesn't need to be shared in hda_intel and hda_controller. The forthcoming platform driver doesn't need the DSP loading code, but sharing it doesn't hurt. Tested on Chromebook Pixel's ca0132 that uses the DSP loader. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Pull allocation from first_init to a new function in hda_controller.c. Short term this will allow the dsp loader to be moved as well. In later commits it will allow the same allocation to be used by the platform hda driver. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Pull the pcm_ops and the functions they use into a new hda_controller file. This is done to allow for other hda implementations besides PCI to use the same ops. The hda_controller file will house functionality related to HDA but independent of the bus used to talk to the controller. This currently shares dsp locking across the two files. This will be remedied in a following commit. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-