- 21 3月, 2006 40 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Merging it with its only user: dccp_v[46]_reqsk_send_ack. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Using this also provides opportunities for introducing inet_csk_alloc_skb that would call alloc_skb, account it to the sock and skb_reserve(max_header), but I'll leave this for later, for now using sk_prot->max_header consistently is enough. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
I.e. they should be just ignored, but we have to use 'break', not 'continue', as we have to possibly reset the mandatory flag. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.52. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add fw_version information to ethtool -i. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some nvram related cleanup: 1. Add a tg3_nvram_read_swab() since swabing the data is frequently done. 2. Add a function to convert nvram address to physical address instead of doing it in 2 separate places. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Ethtool memory test on 5787 requires a new memory table. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support one-shot MSI on 5787. This one-shot MSI idea is credited to David Miller. In this mode, MSI disables itself automatically after it is generated, saving the driver a register access to disable it for NAPI. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2. Since the TSO interface is slightly different and these chips have finally fixed the 4GB DMA problem and do not have the 40-bit DMA problem, a new hard_start_xmit is used for these chips. All previous chips will use the old hard_start_xmit that is now renamed tg3_start_xmit_dma_bug(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support additional nvrams and new nvram format for 5787 and 5754. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add basic support for 2 new chips 5787 and 5754. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin LaHaise 提交于
Here's an updated copy of the patch to use fget_light in net/socket.c. Rerunning the tests show a drop of ~80Mbit/s on average, which looks bad until you see the drop in cpu usage from ~89% to ~82%. That will get fixed in another patch... Before: max 8113.70, min 8026.32, avg 8072.34 87380 16384 16384 10.01 8045.55 87.11 87.11 1.774 1.774 87380 16384 16384 10.01 8065.14 90.86 90.86 1.846 1.846 87380 16384 16384 10.00 8077.76 89.85 89.85 1.822 1.822 87380 16384 16384 10.00 8026.32 89.80 89.80 1.833 1.833 87380 16384 16384 10.01 8108.59 89.81 89.81 1.815 1.815 87380 16384 16384 10.01 8034.53 89.01 89.01 1.815 1.815 87380 16384 16384 10.00 8113.70 90.45 90.45 1.827 1.827 87380 16384 16384 10.00 8111.37 89.90 89.90 1.816 1.816 87380 16384 16384 10.01 8077.75 87.96 87.96 1.784 1.784 87380 16384 16384 10.00 8062.70 90.25 90.25 1.834 1.834 After: max 8035.81, min 7963.69, avg 7998.14 87380 16384 16384 10.01 8000.93 82.11 82.11 1.682 1.682 87380 16384 16384 10.01 8016.17 83.67 83.67 1.710 1.710 87380 16384 16384 10.01 7963.69 83.47 83.47 1.717 1.717 87380 16384 16384 10.01 8014.35 81.71 81.71 1.671 1.671 87380 16384 16384 10.00 7967.68 83.41 83.41 1.715 1.715 87380 16384 16384 10.00 7995.22 81.00 81.00 1.660 1.660 87380 16384 16384 10.00 8002.61 83.90 83.90 1.718 1.718 87380 16384 16384 10.00 8035.81 81.71 81.71 1.666 1.666 87380 16384 16384 10.01 8005.36 82.56 82.56 1.690 1.690 87380 16384 16384 10.00 7979.61 82.50 82.50 1.694 1.694 Signed-off-by: NBenjamin LaHaise <bcrl@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The functions list_del followed by list_add_tail is equivalent to the existing inline list_move_tail. list_move_tail avoids unnecessary _LIST_POISON. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alpt 提交于
The Netsukuku daemon is using the same number to mark its routes, you can see it here: http://hinezumilabs.org/cgi-bin/viewcvs.cgi/netsukuku/src/krnl_route.h?rev=HEAD&content-type=text/vnd.viewcvs-markupSigned-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
struct neigh_ops currently has a destructor field, which no in-kernel drivers outside of infiniband use. The infiniband/ulp/ipoib in-tree driver stashes some info in the neighbour structure (the results of the second-stage lookup from ARP results to real link-level path), and it uses neigh->ops->destructor to get a callback so it can clean up this extra info when a neighbour is freed. We've run into problems with this: since the destructor is in an ops field that is shared between neighbours that may belong to different net devices, there's no way to set/clear it safely. The following patch moves this field to neigh_parms where it can be safely set, together with its twin neigh_setup. Two additional patches in the patch series update ipoib to use this new interface. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
Due to the thread's lock changes, we're at a new version now. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
As suggested by Arnaldo, this patch replaces the thread_lock()/thread_unlock() by directly calls to mutex_lock()/mutex_unlock(). This change makes the code a bit more readable, and the direct calls are used everywhere in the kernel. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
pktgen's thread semaphores are strict mutexes, convert them to the mutex implementation. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
First, it warns when PAGE_SIZE >= 64K because the ctx_len field is 16-bits. Secondly, if there are any real length limitations it can be verified by the security layer security_xfrm_state_alloc() call. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Even 提交于
Instead of estimating the time since the last congestion event, count it directly. Signed-off-by: NBaruch Even <baruch@ev-en.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Even 提交于
Account for delayed-ACKs in H-TCP. Delayed-ACKs cause H-TCP to be less aggressive than its design calls for. It is especially true when the receiver is a Linux machine where the average delayed ack is over 3 packets with values of 7 not unheard of. Signed-off-By: NBaruch Even <baruch@ev-en.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Even 提交于
Use functions to calculate jiffies from milliseconds and not the old, crude method of dividing HZ by a value. Ensures more accurate values even in the face of strange HZ values. Signed-off-By: NBaruch Even <baruch@ev-en.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Evgeniy Polyakov 提交于
Return -ESRCH from cn_netlink_send() when there are not listeners, just as it could be done by netlink_broadcast(). Propagate netlink_broadcast() error back to the caller. Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Basden 提交于
Here goes a patch for supporting TOIM3232 based serial IrDA dongles. The code is based on the tekram dongle code. It's been tested with a TOIM3232 based IRWave 320S dongle. It may work for TOIM4232 dongles, although it's not been tested. Signed-off-by: NDavid Basden <davidb-irda@rcpt.to> Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
With all the previous changes, we're at a new version now. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
This patch ports the per-thread interface list list to the in-kernel linked list implementation. In the general, the resulting code is a bit simpler. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
Even if pktgen's thread initialization fails for all CPUs, the module will be successfully loaded. This patch changes that behaivor, by returning an error on module load time, and also freeing all the resources allocated. It also prints a warning if a thread initialization has failed. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
Free all the alocated resources if kernel_thread() call fails. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
The final result is a simpler and smaller code. Note that I'm adding a new member in the struct pktgen_thread called 'removed'. The reason is that I didn't find a better wait condition to be used in the place of the replaced one. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luiz Capitulino 提交于
Lindet run, with some fixes made by hand. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
According to dccp draft (draft-ietf-dccp-spec-13.txt) section 5.8.2 (Mandatory Option) the following patch correct the handling of the following cases: 1) "... and any Mandatory options received on DCCP-Data packets MUST be ignored." 2) "The connection is in error and should be reset with Reset Code 5, ... if option O is absent (Mandatory was the last byte of the option list), or if option O equals Mandatory." Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
No changes in the logic where made. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
No changes in the logic were made, just removing trailing whitespaces, etc. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Consolidating open coded sequences in tcp and dccp, v4 and v6. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
I guess I forgot to add it, nah, now it just works: 18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0) 18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code) Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both IPv6 and IPv4, so I'll come up with another way for freeing the control sockets in upcoming changesets. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
There's no reason for struct dccp_v4_prot being global. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-