Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
12 个月 前同步成功

通知 150
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 23 10月, 2015 1 次提交
    • H
      PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum · c56d4450
      由 Hariprasad Shenai 提交于 
      The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or
Unexpected Completion errors in some systems, which may cause device access
timeouts.

Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values
for the Attribute as were supplied in the header of the corresponding
Request, except as explicitly allowed when IDO is used."

Instead of copying the Attributes from the Request to the Completion, the
T5 always generates Completions with zero Attributes.  The receiver of a
Completion whose Attributes don't match the Request may accept it (which
itself seems non-compliant based on sec 2.3.2), or it may handle it as a
Malformed TLP or an Unexpected Completion, which will probably lead to a
device access timeout.

Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root
Port so it always generate Requests with zero Attributes.

This does affect all other devices which are downstream of that Root Port,
but these are performance optimizations that should not make a functional
difference.

Note that Configuration Space accesses are never supposed to have TLP
Attributes, so we're safe waiting till after any Configuration Space
accesses to do the Root Port "fixup".

Based on original work by Casey Leedom <leedom@chelsio.com>

[bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework
to use pci_upstream_bridge() and check for Root Port device type, edit
diagnostics to clarify intent and devices affected]
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
      c56d4450
  3. 25 8月, 2015 1 次提交
    • Z
      PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI · 91f15fb3
      由 Zhang Rui 提交于 
      On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0.  The result is that PATA doesn't work after resume, and we
print messages like this:

  pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
  irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa ("PM / sleep:
Asynchronous threads for resume_noirq").  Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41c ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices.  With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume.  Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551Reported-and-tested-by: NBarto <mister.freeman@laposte.net>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.15+
      91f15fb3
  5. 24 8月, 2015 1 次提交
    • K
      PCI: Set MPS to match upstream bridge · 27d868b5
      由 Keith Busch 提交于 
      Firmware typically configures the PCIe fabric with a consistent Max Payload
Size setting based on the devices present at boot.  A hot-added device
typically has the power-on default MPS setting (128 bytes), which may not
match the fabric.

The previous Linux default, in the absence of any "pci=pcie_bus_*" options,
was PCIE_BUS_TUNE_OFF, in which we never touch MPS, even for hot-added
devices.

Add a new default setting, PCIE_BUS_DEFAULT, in which we make sure every
device's MPS setting matches the upstream bridge.  This makes it more
likely that a hot-added device will work in a system with optimized MPS
configuration.

Note that if we hot-add a device that only supports 128-byte MPS, it still
likely won't work because we don't reconfigure the rest of the fabric.
Booting with "pci=pcie_bus_peer2peer" is a workaround for this because it
sets MPS to 128 for everything.

[bhelgaas: changelog, new default, rework for pci_configure_device() path]
Tested-by: NKeith Busch <keith.busch@intel.com>
Tested-by: NJordan Hargrave <jharg93@gmail.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
      27d868b5
  7. 12 8月, 2015 1 次提交
  9. 10 8月, 2015 1 次提交
  11. 22 7月, 2015 1 次提交
  13. 15 7月, 2015 9 次提交
  15. 22 5月, 2015 1 次提交
  17. 16 5月, 2015 1 次提交
  19. 07 5月, 2015 1 次提交
  21. 24 4月, 2015 1 次提交
  23. 09 4月, 2015 1 次提交
  25. 24 3月, 2015 1 次提交
    • A
      PCI: Add ACS quirks for Intel 1G NICs · d748804f
      由 Alex Williamson 提交于 
      Intel has verified that there is no peer-to-peer between functions for the
below selection of 82580, 82576, 82575, I350, and 82571 multi-port devices.
This adds the necessary quirks to consider the functions isolated from each
other.  82571 quad-port devices are omitted due to likely lack of
ACS/isolation in the onboard switch, rendering quirks for the downstream
endpoints useless.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: John Ronciak <john.ronciak@intel.com>
      d748804f
  27. 04 2月, 2015 1 次提交
  29. 24 1月, 2015 2 次提交
    • A
      PCI: Add Wellsburg (X99) to Intel PCH root port ACS quirk · 78e88358
      由 Alex Williamson 提交于 
      Intel has confirmed that the Wellsburg chipset, while not reporting ACS,
does provide the proper isolation through the RCBA/BSPR registers, so the
same quirk works for this set of device IDs.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDon Dugger <donald.d.dugger@intel.com>
      78e88358
    • A
      PCI: Add DMA alias quirk for Adaptec 3405 · d3d2ab43
      由 Alex Williamson 提交于 
      The Adaptec 3405 is actually an Intel 80333 I/O processor where the exposed
device at 0e.0 is actually the address translation unit of the I/O
processor and a hidden, private device at 01.0 masters the DMA for the
device.  Create a fixed alias between the exposed and hidden devfn so we
can enable the IOMMU.

Scenarios like this are potentially likely for any device incorporating
this I/O processor, so this little bit of abstraction with the fixed alias
table should make future additions trivial.

Without this fix, booting a system with the Intel IOMMU enabled and an
Adaptec 3405 at 02:0e.0 results in a flood of errors like this:

  dmar: DRHD: handling fault status reg 3
  dmar: DMAR:[DMA Write] Request device [02:01.0] fault addr ffbff000
  DMAR:[fault reason 02] Present bit in context entry is clear

[bhelgaas: changelog, comment]
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
      d3d2ab43
  31. 17 1月, 2015 3 次提交
  33. 04 11月, 2014 1 次提交
  35. 02 10月, 2014 1 次提交
  37. 30 9月, 2014 1 次提交
  39. 23 9月, 2014 2 次提交
  41. 17 9月, 2014 1 次提交
  43. 09 9月, 2014 1 次提交
  45. 06 7月, 2014 1 次提交
  47. 20 6月, 2014 2 次提交
    • A
      PCI: Suspend/resume quirks for Apple thunderbolt · 1df5172c
      由 Andreas Noever 提交于 
      Add two quirks to support thunderbolt suspend/resume on Apple systems.
We need to perform two different actions during suspend and resume:

The whole controller has to be powered down before suspend. If this is
not done then the native host interface device will be gone after resume
if a thunderbolt device was plugged in before suspending. The controller
represents itself as multiple PCI devices/bridges. To power it down we
hook into the upstream bridge of the controller and call the magic ACPI
methods.  Power will be restored automatically during resume (by the
firmware presumably).

During resume we have to wait for the native host interface to
reestablish all pci tunnels. Since there is no parent-child relationship
between the NHI and the bridges we have to explicitly wait for them
using device_pm_wait_for_dev. We do this in the resume_noirq phase of
the downstream bridges of the controller (which lead into the
thunderbolt tunnels).
Signed-off-by: NAndreas Noever <andreas.noever@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1df5172c
    • A
      PCI: Add pci_fixup_suspend_late quirk pass · 7d2a01b8
      由 Andreas Noever 提交于 
      Add pci_fixup_suspend_late as a new pci_fixup_pass. The pass is called
from suspend_noirq and poweroff_noirq. Using the same pass for suspend
and hibernate is consistent with resume_early which is called by
resume_noirq and restore_noirq.

The new quirk pass is required for Thunderbolt support on Apple
hardware.
Signed-off-by: NAndreas Noever <andreas.noever@gmail.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7d2a01b8
  49. 12 6月, 2014 1 次提交
  51. 11 6月, 2014 2 次提交