Previously, these macros hardcoded THREAD_EVR0 as the base of the save
area, relative to the base register passed.  This base offset is now
passed as a separate macro parameter, allowing reuse with other SPE
save areas, such as used by KVM.
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

giveup_spe() saves the SPE state which is protected by MSR[SPE].
However, modifying SPEFSCR does not trap when MSR[SPE]=0.
And since SPEFSCR is already saved/restored in _switch(),
not all the callers want to save SPEFSCR again.
Thus, saving SPEFSCR should not belong to giveup_spe().

This patch moves SPEFSCR saving to flush_spe_to_thread(),
and cleans up the caller that needs to save SPEFSCR accordingly.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Up until now, Book3S KVM had variables stored in the kernel that a kernel module
or the kvm code in the kernel could read from to figure out where some real mode
helper functions are located.

This is all unnecessary. The high bits of the EA get ignore in real mode, so we
can just use the pointer as is. Also, it's a lot easier on relocations when we
use the normal way of resolving the address to a function, instead of jumping
through hoops.

This patch fixes compilation with CONFIG_RELOCATABLE=y.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When http://www.spinics.net/lists/kvm-ppc/msg02664.html
was applied to produce commit b51e7aa7ed6d8d134d02df78300ab0f91cfff4d2,
the removal of the conversion in add_exit_timing was left out.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

kvm_set_cr0() and kvm_set_cr4(), and possible other functions,
assume that kvm_mmu_reset_context() flushes the guest TLB.  However,
it does not.

Fix by flushing the tlb (and syncing the new root as well).
Signed-off-by: NAvi Kivity <avi@redhat.com>

When CR0.WP=0, we sometimes map user pages as kernel pages (to allow
the kernel to write to them).  Unfortunately this also allows the kernel
to fetch from these pages, even if CR4.SMEP is set.

Adjust for this by also setting NX on the spte in these circumstances.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch exposes ERMS feature to KVM guests.

The REP MOVSB/STOSB instruction can enhance fast strings attempts to
move as much of the data with larger size load/stores as possible.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch exposes RDWRGSFS bit to KVM guests.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds RDWRGSFS support when setting CR4.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch removes RDWRGSFS bit from CR4_RESERVED_BITS.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch exposes DRNG feature to KVM guests.

The RDRAND instruction can provide software with sequences of
random numbers generated from white noise.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

commit 123108f1c1aafd51d6a5c79cc04d7999dd88a930 tried to fix KVMs
XSAVE valid feature scanning, but it was wrong. It was not considering
the sparse nature of this bitfield, instead reading values from
uninitialized members of the entries array.
This patch now separates subleaf indicies from KVM's array indicies
and fills the entry before querying it's value.
This fixes AVX support in KVM guests.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The documented behavior did not match the implemented one (which also
never changed).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM_MAX_MSIX_PER_DEV implies that up to that many MSI-X entries can be
requested. But the kernel so far rejected already the upper limit.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM has an ioctl to define which signal mask should be used while running
inside VCPU_RUN. At least for big endian systems, this mask is different
on 32-bit and 64-bit systems (though the size is identical).

Add a compat wrapper that converts the mask to whatever the kernel accepts,
allowing 32-bit kvm user space to set signal masks.

This patch fixes qemu with --enable-io-thread on ppc64 hosts when running
32-bit user land.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Neither host_irq nor the guest_msi struct are used anymore today.
Tag the former, drop the latter to avoid confusion.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds instruction fetch checking when walking guest page table,
to implement SMEP when emulating instead of executing natively.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NShan, Haitao <haitao.shan@intel.com>
Signed-off-by: NLi, Xin <xin.li@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch masks CPUID leaf 7 ebx against host capability word9.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NShan, Haitao <haitao.shan@intel.com>
Signed-off-by: NLi, Xin <xin.li@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds SMEP handling when setting CR4.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NShan, Haitao <haitao.shan@intel.com>
Signed-off-by: NLi, Xin <xin.li@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch removes SMEP bit from CR4_RESERVED_BITS.
Signed-off-by: NYang, Wei <wei.y.yang@intel.com>
Signed-off-by: NShan, Haitao <haitao.shan@intel.com>
Signed-off-by: NLi, Xin <xin.li@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The nested VMX feature is supposed to fully emulate VMX for the guest. This
(theoretically) not only allows it to run its own guests, but also also
to further emulate VMX for its own guests, and allow arbitrarily deep nesting.

This patch fixes a bug (discovered by Kevin Tian) in handling a VMLAUNCH
by L2, which prevented deeper nesting.

Deeper nesting now works (I only actually tested L3), but is currently
*absurdly* slow, to the point of being unusable.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This saves a lot of pointless casts x86_emulate_ctxt and decode_cache.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The name eip conflicts with a field of the same name in x86_emulate_ctxt,
which we plan to fold decode_cache into.

The name _eip is unfortunate, but what's really needed is a refactoring
here, not a better name.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

a is unused now on CONFIG_X86_32.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

  LOOP/LOOPcc      : E0-E2
  JCXZ/JECXZ/JRCXZ : E3
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Call emulate_int() directly to avoid spaghetti goto's.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Different functions for those which take segment register operands.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In addition, replace one "goto xchg" with an em_xchg() call.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move the following functions to the opcode tables:

  RET (Far return) : CB
  IRET             : CF
  JMP (Jump far)   : EA

  SYSCALL          : 0F 05
  CLTS             : 0F 06
  SYSENTER         : 0F 34
  SYSEXIT          : 0F 35
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The next patch will change these to be called by opcode::execute.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We should use the local variables ctxt and c when the emulate_ctxt and
decode appears many times.  At least, we need to be consistent about
how we use these in a function.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Document KVM_IOEVENTFD that can be used to receive
notifications of PIO/MMIO events without triggering
an exit.
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch includes a brief introduction to the nested vmx feature in the
Documentation/kvm directory. The document also includes a copy of the
vmcs12 structure, as requested by Avi Kivity.

[marcelo: move to Documentation/virtual/kvm]
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Small corrections of KVM (spelling, etc.) not directly related to nested VMX.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If the "nested" module option is enabled, add the "VMX" CPU feature to the
list of CPU features KVM advertises with the KVM_GET_SUPPORTED_CPUID ioctl.

Qemu uses this ioctl, and intersects KVM's list with its own list of desired
cpu features (depending on the -cpu option given to qemu) to determine the
final list of features presented to the guest.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In the unlikely case that L1 does not capture MSR_IA32_TSC, L0 needs to
emulate this MSR write by L2 by modifying vmcs02.tsc_offset. We also need to
set vmcs12.tsc_offset, for this change to survive the next nested entry (see
prepare_vmcs02()).
Additionally, we also need to modify vmx_adjust_tsc_offset: The semantics
of this function is that the TSC of all guests on this vcpu, L1 and possibly
several L2s, need to be adjusted. To do this, we need to adjust vmcs01's
tsc_offset (this offset will also apply to each L2s we enter). We can't set
vmcs01 now, so we have to remember this adjustment and apply it when we
later exit to L1.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>