GK20A's initialization was based on GK104, but differences exist in the
way the initial context is built and the initialization process itself.

This patch follows the same initialization sequence as nvgpu performs
to avoid bad surprises. Since the register bundles initialization also
differ considerably from GK104, the register packs are now loaded from
firmware files, again similarly to what is done with nvgpu.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

NVIDIA will officially start providing GR firmwares through
linux-firmware for GPUs that require it. Change the GR firmware lookup
function to use these files.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gk104_pm_ctor() is equal to gf100_pm_ctor().
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This trivial patch makes thing more consistent since hardware signals
names are prefixed by 'pcXX'.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is going to be very useful for GF100+ because each GPC can
have its own domain of counters.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

According to the tstate calculation in nvkm_clk_tstate(),
the range of tstate is from -(clk->state_nr - 1) to 0,
it mean the tstate is negative value. But in nvkm_pstate_work(),
it use (clk->state_nr - 1 - clk->tstate) to limit pstate,
it's not correct.
This patch fix it to use (clk->state_nr - 1 + clk->tstate) to
limit pstate.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.

This commit also adds a new class for GF108 and GF117.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from NVIDIA
PerfKit (Windows) and CUPTI (Linux), they will be used to build complex
hardware events from the userspace.

This commit also adds a new class for GT200.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Configuring counters from the userspace require the kernel to handle some
logic related to performance counters. Basically, it has to find a free
slot to assign a counter, to handle extra counting modes like B4/B6 and it
must return and error when it can't configure a counter.

In my opinion, the kernel should not handle all of that logic but it
should only write the configuration sent by the userspace without
checking anything. In other words, it should overwrite the configuration
even if it's already counting and do not return any errors.

This patch allows the userspace to configure a domain instead of
separate counters. This has the advantage to move all of the logic to
the userspace.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This adds a new method NVIF_PERFCTR_V0_INIT which starts a batch of
hardware counters for sampling. This will allow the userspace to start
a monitoring session using the INIT method and to stop it with SAMPLE,
for example before and after a frame is rendered.

This commit temporarily breaks nv_perfmon but this is going to be fixed
with the upcoming patch.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows to query the ID, the mask and the user-readable name of
sources for each signal.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

A source (or multiplexer) is a tuple addr+mask+shift which allows to
control a block of signals. The maximum number of sources that a signal
can define is arbitrary limited to 8 and this should be large enough.
This patch allows to define multi-level of sources for a signal.

Each different sources are stored to a global list and will be exposed
to the userspace through the nvif interface in order to avoid conflicts.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This signal index must be always allowed even if it's not clearly
defined in a domain in order to monitor a counter like 0x03020100
because it's the default value of signals.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

16 bits is large enough to store the maximum number of signals available
for one domain (i.e. 256).
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will allow to configure performance counters with hardware signal
indexes instead of user-readable names in an upcoming patch.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows to query the number of available domains, including the
number of hardware counter and the number of signals per domain.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Since a new class has been introduced to query signals, we can now
return an error when the userspace wants to monitor unknown signals.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This commit introduces the NVIF_IOCTL_NEW_V0_PERFMON class which will be
used in order to query domains, signals and sources. This separates the
querying and the counting interface.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

PDAEMON signals don't have to be exposed by the perfmon engine.
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Tested on a few cards. Probably works quite well for most, given they should
all be GDDR3.
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This looks surprisingly similar to scripts on earlier cards as well
but they don't seem to work just yet. That... and I don't have any, which
makes it a tough job to reverse engineer.
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some of the bits in there are similar to the bits in the gt215 rammap.
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Might need some generalisation to < GT200. For those: use at your own risk!
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Like on GT215
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In preparation of NV50 reclocking, where there is no version
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This was merged with core/device.h in an earlier commit, but somehow
never got removed.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This reverts commit 1addc126

This commit seems to cause crashes in gk104_fifo_intr_runlist() by
returning 0xbad0da00 when register 0x2a00 is read. Since this commit was
intended for GM20B which is not completely supported yet, let's revert
it for the time being.
Reported-by: NEric Biggers <ebiggers3@gmail.com>
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Tested-by: NAfzal Mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>