- 21 4月, 2008 20 次提交
-
-
由 David Brownell 提交于
Minor cleanups to the OMAP RNG: - Comment update re RNG status: * yes, it works on 16xx; "rngtest" is quite happy * it's fast enough that polling vs IRQ is a non-issue - Get rid of BUG_ON - Help GCC not be stupid about inlining (object code shrink) - Remove "sparse" warning - Cope with new hotplug rule requiring "platform:" modalias And make the file header match kernel conventions. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
Ciphers, block modes, name it, are grouped together and sorted. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Kamalesh Babulal 提交于
On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote: > Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote: > > > This patch cleanups the crypto code, replaces the init() and fini() > > with the <algorithm name>_init/_fini > > This part ist OK. > > > or init/fini_<algorithm name> (if the > > <algorithm name>_init/_fini exist) > > Having init_foo and foo_init won't be a good thing, will it? I'd start > confusing them. > > What about foo_modinit instead? Thanks for the suggestion, the init() is replaced with <algorithm name>_mod_init () and fini () is replaced with <algorithm name>_mod_fini. Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The Padlock AES setkey routine is the same as exported by the generic implementation. So we could use it. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Cc: Michal Ludvig <michal@logix.cz> Tested-by: NStefan Hellermann <stefan@the2masters.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The key expansion routine could be get little more generic, become a kernel doc entry and then get exported. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Tested-by: NStefan Hellermann <stefan@the2masters.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Kevin Coffman 提交于
Implement CTS wrapper for CBC mode required for support of AES encryption support for Kerberos (rfc3962). Signed-off-by: NKevin Coffman <kwc@citi.umich.edu> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Marcin Slusarz 提交于
replace all: big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) + expression_in_cpu_byteorder); with: beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder); Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The third test vector of ECB-XTEA-ENC fails for me all other are fine. I could not find a RFC or something else where they are defined. The test vector has not been modified since git started recording histrory. The implementation is very close (not to say equal) to what is available as Public Domain (they recommend 64 rounds and the in kernel uses 32). Therefore I belive that there is typo somewhere and tcrypt reported always *fail* instead of *okey*. This patch replaces input + result of the third test vector with result + input from the third decryption vector. The key is the same, the other three test vectors are also the reverse. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
Currently the tcrypt module is about 2 MiB on x86-32. The main reason for the huge size is the data segment which contains all the test vectors for each algorithm. The test vectors are staticly allocated in an array and the size of the array has been drastically increased by the merge of the Salsa20 test vectors. With a hint from Benedigt Spranger I found a way how I could convert those fixed-length arrays to strings which are flexible in size. VIM and regex were also very helpfull :) So, I am talking about a shrinking of ~97% on x86-32: text data bss dec hex filename 18309 2039708 20 2058037 1f6735 tcrypt-b4.ko 45628 23516 80 69224 10e68 tcrypt.ko Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The test routines (test_{cipher,hash,aead}) are makeing a copy of the test template and are processing the encryption process in place. This patch changes the creation of the copy so it will work even if the source address of the input data isn't an array inside of the template but a pointer. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The return parameter isn't used remove it. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The speed templates as it look always the same. The key size is repeated for each block size and we test always the same block size. The addition of one inner loop makes it possible to get rid of the struct and it is possible to use a tiny u8 array :) Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
Some crypto ciphers which are impleneted support similar key sizes (16,24 & 32 byte). They can be grouped together and use a common templatte instead of their own which contains the same data. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Glauber 提交于
Rename sha512 to sha512_generic and add a MODULE_ALIAS for sha512 so all sha512 implementations can be loaded automatically. Keep the broken tabs so git recognizes this as a rename. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Glauber 提交于
Exploit the System z10 hardware acceleration for SHA384. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Glauber 提交于
Exploit the System z10 hardware acceleration for SHA512. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Glauber 提交于
The sha_{update|final} functions are similar for every sha variant. Since that is error-prone and redundant replace these functions by a shared generic implementation for s390. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 19 4月, 2008 20 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: security: fix up documentation for security_module_enable Security: Introduce security= boot parameter Audit: Final renamings and cleanup SELinux: use new audit hooks, remove redundant exports Audit: internally use the new LSM audit hooks LSM/Audit: Introduce generic Audit LSM hooks SELinux: remove redundant exports Netlink: Use generic LSM hook Audit: use new LSM hooks instead of SELinux exports SELinux: setup new inode/ipc getsecid hooks LSM: Introduce inode_getsecid and ipc_getsecid hooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
-
由 James Morris 提交于
security_module_enable() can only be called during kernel init. Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Ahmed S. Darwish 提交于
Add the security= boot parameter. This is done to avoid LSM registration clashes in case of more than one bult-in module. User can choose a security module to enable at boot. If no security= boot parameter is specified, only the first LSM asking for registration will be loaded. An invalid security module name will be treated as if no module has been chosen. LSM modules must check now if they are allowed to register by calling security_module_enable(ops) first. Modify SELinux and SMACK to do so. Do not let SMACK register smackfs if it was not chosen on boot. Smackfs assumes that smack hooks are registered and the initial task security setup (swapper->security) is done. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Ahmed S. Darwish 提交于
Rename the se_str and se_rule audit fields elements to lsm_str and lsm_rule to avoid confusion. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Ahmed S. Darwish 提交于
Setup the new Audit LSM hooks for SELinux. Remove the now redundant exported SELinux Audit interface. Audit: Export 'audit_krule' and 'audit_field' to the public since their internals are needed by the implementation of the new LSM hook 'audit_rule_known'. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Ahmed S. Darwish 提交于
Convert Audit to use the new LSM Audit hooks instead of the exported SELinux interface. Basically, use: security_audit_rule_init secuirty_audit_rule_free security_audit_rule_known security_audit_rule_match instad of (respectively) : selinux_audit_rule_init selinux_audit_rule_free audit_rule_has_selinux selinux_audit_rule_match Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Ahmed S. Darwish 提交于
Introduce a generic Audit interface for security modules by adding the following new LSM hooks: audit_rule_init(field, op, rulestr, lsmrule) audit_rule_known(krule) audit_rule_match(secid, field, op, rule, actx) audit_rule_free(rule) Those hooks are only available if CONFIG_AUDIT is enabled. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Ahmed S. Darwish 提交于
Remove the following exported SELinux interfaces: selinux_get_inode_sid(inode, sid) selinux_get_ipc_sid(ipcp, sid) selinux_get_task_sid(tsk, sid) selinux_sid_to_string(sid, ctx, len) They can be substitued with the following generic equivalents respectively: new LSM hook, inode_getsecid(inode, secid) new LSM hook, ipc_getsecid*(ipcp, secid) LSM hook, task_getsecid(tsk, secid) LSM hook, sid_to_secctx(sid, ctx, len) Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Ahmed S. Darwish 提交于
Don't use SELinux exported selinux_get_task_sid symbol. Use the generic LSM equivalent instead. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Ahmed S. Darwish 提交于
Stop using the following exported SELinux interfaces: selinux_get_inode_sid(inode, sid) selinux_get_ipc_sid(ipcp, sid) selinux_get_task_sid(tsk, sid) selinux_sid_to_string(sid, ctx, len) kfree(ctx) and use following generic LSM equivalents respectively: security_inode_getsecid(inode, secid) security_ipc_getsecid*(ipcp, secid) security_task_getsecid(tsk, secid) security_sid_to_secctx(sid, ctx, len) security_release_secctx(ctx, len) Call security_release_secctx only if security_secid_to_secctx succeeded. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Ahmed S. Darwish 提交于
Setup the new inode_getsecid and ipc_getsecid() LSM hooks for SELinux. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Ahmed S. Darwish 提交于
Introduce inode_getsecid(inode, secid) and ipc_getsecid(ipcp, secid) LSM hooks. These hooks will be used instead of similar exported SELinux interfaces. Let {inode,ipc,task}_getsecid hooks set the secid to 0 by default if CONFIG_SECURITY is not defined or if the hook is set to NULL (dummy). This is done to notify the caller that no valid secid exists. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Alexey Dobriyan 提交于
This patch effectively reverts commit d0498d9a aka "[NET]: Do not allocate unneeded memory for dev->priv alignment." It was found to be buggy because of final unconditional += NETDEV_ALIGN_CONST removal. For example, for sizeof(struct net_device) being 2048 bytes, "alloc_size" was also 2048 bytes, but allocator with debugging options turned on started giving out !32-byte aligned memory resulting in redzones overwrites. Patch does small optimization in ->priv'less case: bumping size to next 32-byte boundary was always done to ensure ->priv will also be aligned. But, no ->priv, no need to do that. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
do not return a -EINVAL when mmap()-ing PCI holes. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NArjan van de Ven <arjan@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits) firewire: cleanups firewire: fix synchronization of gap counts firewire: wait until PHY configuration packet was transmitted (fix bus reset loop) firewire: remove unused struct member firewire: use bitwise and to get reg in handle_registers firewire: replace more hex values with defined csr constants firewire: reread config ROM when device reset the bus firewire: replace static ROM cache by allocated cache firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more) firewire: fw-ohci: extend logging of bus generations and node ID firewire: fw-ohci: conditionally log busReset interrupts firewire: fw-ohci: don't append to AT context when it's not active firewire: fw-ohci: log regAccessFail events firewire: fw-ohci: make sure HCControl register LPS bit is set firewire: fw-ohci: missing PPC PMac feature calls in failure path firewire: fw-ohci: untangle a mixed unsigned/signed expression firewire: debug interrupt events firewire: fw-ohci: catch self_id_count == 0 firewire: fw-ohci: add self ID error check firewire: fw-ohci: refactor probe, remove, suspend, resume ...
-
由 James Bottomley 提交于
The kernel now panics reliably on boot if you have a SATAPI device connected. The problem was introduced by the libata merge trying to pull out all the SFF code into a separate module. Unfortunately, if you're a satapi device you usually need to call atapi_request_sense, which has a bare invocation of a SFF callback which is NULL on non-SFF HBAs. Fix this by making the call conditional. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits) ocfs2/net: Add debug interface to o2net ocfs2: Only build ocfs2/dlm with the o2cb stack module ocfs2/cluster: Get rid of arguments to the timeout routines ocfs2: Put tree in MAINTAINERS ocfs2: Use BUG_ON ocfs2: Convert ocfs2 over to unlocked_ioctl ocfs2: Improve rename locking fs/ocfs2/aops.c: test for IS_ERR rather than 0 ocfs2: Add inode stealing for ocfs2_reserve_new_inode ocfs2: Add ac_alloc_slot in ocfs2_alloc_context ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits ocfs2: Enable cross extent block merge. ocfs2: Add support for cross extent block ocfs2: Move /sys/o2cb to /sys/fs/o2cb sysfs: Allow removal of symlinks in the sysfs root ocfs2: Reconnect after idle time out. ocfs2/dlm: Cleanup lockres print ocfs2/dlm: Fix lockname in lockres print function ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c ocfs2/dlm: Dumps the purgelist into a debugfs file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits) [GFS2] fix assertion in log_refund() [GFS2] fix GFP_KERNEL misuses [GFS2] test for IS_ERR rather than 0 [GFS2] Invalidate cache at correct point [GFS2] fs/gfs2/recovery.c: suppress warnings [GFS2] Faster gfs2_bitfit algorithm [GFS2] Streamline quota lock/check for no-quota case [GFS2] Remove drop of module ref where not needed [GFS2] gfs2_adjust_quota has broken unstuffing code [GFS2] possible null pointer dereference fixup [GFS2] Need to ensure that sector_t is 64bits for GFS2 [GFS2] re-support special inode [GFS2] remove gfs2_dev_iops [GFS2] fix file_system_type leak on gfs2meta mount [GFS2] Allow bmap to allocate extents [GFS2] Fix a page lock / glock deadlock [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops [GFS2] gfs2/ops_file.c should #include "ops_inode.h" [GFS2] be*_add_cpu conversion [GFS2] Fix bug where we called drop_bh incorrectly ...
-