Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 07 6月, 2015 1 次提交
    • K
      perf tools: handle PERF_RECORD_LOST_SAMPLES · c4937a91
      由 Kan Liang 提交于 
      This patch modifies the perf tool to handle the new RECORD type,
PERF_RECORD_LOST_SAMPLES.

The number of lost-sample events is stored in
.nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples
which the kernel dropped is stored in total_lost_samples.

When the percentage of dropped samples is greater than 5%, a warning
is printed.

Here are some examples:

Eg 1, Recording different frequently-occurring events is safe with the
      patch. Only a very low drop rate is associated with such actions.

$ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain

$ perf report -D | tail
          SAMPLE events:     120243
           MMAP2 events:          5
    LOST_SAMPLES events:         24
  FINISHED_ROUND events:         15
cycles:p stats:
           TOTAL events:      59348
          SAMPLE events:      59348
instructions:p stats:
           TOTAL events:      60895
          SAMPLE events:      60895

$ perf report --stdio --group
 # To display the perf.data header info, please use --header/--header-only options.
 #
 #
 # Total Lost Samples: 24
 #
 # Samples: 120K of event 'anon group { cycles:p, instructions:p }'
 # Event count (approx.): 24048600000
 #
 #         Overhead  Command      Shared Object     Symbol
 # ................  ...........  ................
 ..................................
 #
    99.74%  99.86%  tchain_edit  tchain_edit       [.] f3
     0.09%   0.02%  tchain_edit  tchain_edit       [.] f2
     0.04%   0.00%  tchain_edit  [kernel.vmlinux]  [k] ixgbe_read_reg

Eg 2, Recording the same thing multiple times can lead to high drop
      rate, but it is not a useful configuration.

$ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain
Warning: Processed 600592 samples and lost 99.73% samples!
[perf record: Woken up 148 times to write data]
[perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)]
[perf record: Woken up 1 times to write data]
[perf record: Captured and wrote 0.121 MB perf.data (1629 samples)]
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c4937a91
  3. 27 5月, 2015 1 次提交
    • A
      perf session: Fix perf_session__peek_event() · 554e92ed
      由 Adrian Hunter 提交于 
      perf_session__peek_event() generally leverages there being a single mmap
of the perf.data file, however on 32-bit platforms when there is more
that 32MiB of data, then there are multiple mmaps, so
perf_session__peek_event() reads from the file.

In that case a couple of bugs were exposed (note how the seg. fault
appears with >32M of data):

   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 1000000
   [ perf record: Woken up 13 times to write data ]
   [ perf record: Captured and wrote 24.568 MB perf.data ]
   $ perf script > /dev/null
   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 10000000
   [ perf record: Woken up 136 times to write data ]
   [ perf record: Captured and wrote 270.794 MB perf.data ]
   $ perf script > /dev/null
   Segmentation fault (core dumped)

The wrong address was being passed to the readn() function and the
buffer size was not being checked.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      554e92ed
  5. 06 5月, 2015 2 次提交
  7. 05 5月, 2015 1 次提交
    • A
      perf tools: Add AUX area tracing index · 99fa2984
      由 Adrian Hunter 提交于 
      Add an index of AUX area tracing events within a perf.data file.

perf record uses a special user event PERF_RECORD_FINISHED_ROUND to
enable sorting of events in chunks instead of having to sort all events
altogether.

AUX area tracing events contain data that can span back to the very
beginning of the recording period. i.e. they do not obey the rules of
PERF_RECORD_FINISHED_ROUND.

By adding an index, AUX area tracing events can be found in advance and
the PERF_RECORD_FINISHED_ROUND approach works as usual.

The index is recorded with the auxtrace feature in the perf.data file.
A session reads the index but does not process it.  An AUX area decoder
can queue all the AUX area data in advance using
auxtrace_queues__process_index() or otherwise process the index in some
custom manner.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      99fa2984
  9. 29 4月, 2015 5 次提交
  11. 08 4月, 2015 1 次提交
  13. 01 4月, 2015 2 次提交
    • A
      perf ordered_samples: Remove references to perf_{evlist,tool} and machines · 9870d780
      由 Arnaldo Carvalho de Melo 提交于 
      As these can be obtained from the ordered_events pointer, via
container_of, reducing the cross section of ordered_samples.

These were added to ordered_samples in:

 commit b7b61cbe
 Author: Arnaldo Carvalho de Melo <acme@redhat.com>
 Date:   Tue Mar 3 11:58:45 2015 -0300

    perf ordered_events: Shorten function signatures

    By keeping pointers to machines, evlist and tool in ordered_events.

But that was more a transitional patch while moving stuff out from
perf_session.c to ordered_events.c and possibly not even needed by then,
as we could use the container_of() method and instead of having the
nr_unordered_samples stats in events_stats, we can have it in
ordered_samples.
Based-on-a-patch-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4lk0t9js82g0tfc0x1onpkjt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9870d780
    • A
      perf session: Always initialize ordered_events · aae59fab
      由 Arnaldo Carvalho de Melo 提交于 
      Even when it is not used to actually reorder events, some of its fields
are used, like session->ordered_events->tool, to shorten function
signatures where tool, for instance, was being passed, as the tool is
needed for the ordered_events code, we need it there and might as well
use it for other perf_session needs.

This fixes a problem where 'perf script' had some condition that made
session->ordered_events not to be initialized even with its
script->tool ordered_events related flags asking for it to be, which
looks like another bug and needs to be investigated further.

Always initializing session->ordered_events at least leaves the current
assumptions in place, so do it now.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b1xxk0rwkz2a0gip1uufmjqg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      aae59fab
  15. 12 3月, 2015 3 次提交
  17. 11 3月, 2015 2 次提交
  19. 03 3月, 2015 1 次提交
    • A
      perf tools: Reference count struct thread · f3b623b8
      由 Arnaldo Carvalho de Melo 提交于 
      We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.

We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ejvfyed0r7ue61dkurzjux4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f3b623b8
  21. 23 2月, 2015 5 次提交
  23. 19 2月, 2015 1 次提交
    • K
      perf tools: Construct LBR call chain · 384b6055
      由 Kan Liang 提交于 
      LBR call stack only has user-space callchains. It is output in the
PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's
still in the form of PERF_SAMPLE_CALLCHAIN.

The perf tool has to handle both data sources to construct a
complete callstack.

For the "perf report -D" option, both lbr and fp information will be
displayed.

A new call chain recording option "lbr" is introduced into the perf
tool for LBR call stack. The user can use --call-graph lbr to get
the call stack information from hardware.

Here are some examples.

When profiling bc(1) on Fedora 19:

  echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd

If enabling LBR, perf report output looks like:

    50.36%       bc  bc                 [.] bc_divide
                 |
                 --- bc_divide
                     execute
                     run_code
                     yyparse
                     main
                     __libc_start_main
                     _start
    33.66%       bc  bc                 [.] _one_mult
                 |
                 --- _one_mult
                     bc_divide
                     execute
                     run_code
                     yyparse
                     main
                     __libc_start_main
                     _start
     7.62%       bc  bc                 [.] _bc_do_add
                 |
                 --- _bc_do_add
                    |
                    |--99.89%-- 0x2000186a8
                     --0.11%-- [...]
     6.83%       bc  bc                 [.] _bc_do_sub
                 |
                 --- _bc_do_sub
                    |
                    |--99.94%-- bc_add
                    |          execute
                    |          run_code
                    |          yyparse
                    |          main
                    |          __libc_start_main
                    |          _start
                     --0.06%-- [...]
     0.46%       bc  libc-2.17.so       [.] __memset_sse2
                 |
                 --- __memset_sse2
                    |
                    |--54.13%-- bc_new_num
                    |          |
                    |          |--51.00%-- bc_divide
                    |          |          execute
                    |          |          run_code
                    |          |          yyparse
                    |          |          main
                    |          |          __libc_start_main
                    |          |          _start
                    |          |
                    |          |--30.46%-- _bc_do_sub
                    |          |          bc_add
                    |          |          execute
                    |          |          run_code
                    |          |          yyparse
                    |          |          main
                    |          |          __libc_start_main
                    |          |          _start
                    |          |
                    |           --18.55%-- _bc_do_add
                    |                     bc_add
                    |                     execute
                    |                     run_code
                    |                     yyparse
                    |                     main
                    |                     __libc_start_main
                    |                     _start
                    |
                     --45.87%-- bc_divide
                               execute
                               run_code
                               yyparse
                               main
                               __libc_start_main
                               _start

If using FP, perf report output looks like:

  echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd

    50.49%       bc  bc                 [.] bc_divide
                 |
                 --- bc_divide
    33.57%       bc  bc                 [.] _one_mult
                 |
                 --- _one_mult
     7.61%       bc  bc                 [.] _bc_do_add
                 |
                 --- _bc_do_add
                     0x2000186a8
     6.88%       bc  bc                 [.] _bc_do_sub
                 |
                 --- _bc_do_sub
     0.42%       bc  libc-2.17.so       [.] __memcpy_ssse3_back
                 |
                 --- __memcpy_ssse3_back

If using LBR, perf report -D output looks like:

3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0
... LBR call chain: nr:8
.....  0: fffffffffffffe00
.....  1: 0000000000408e50
.....  2: 000000000040a458
.....  3: 000000000040562e
.....  4: 0000000000408590
.....  5: 00000000004022c0
.....  6: 00000000004015dd
.....  7: 0000003d1cc21b43
... FP chain: nr:2
.....  0: fffffffffffffe00
.....  1: 0000000000408ea8
 ... thread: bc:9748
 ...... dso: /usr/bin/bc

The LBR call stack has the following known limitations:

 - Zero length calls are not filtered out by the hardware

 - Exception handing such as setjmp/longjmp will have calls/returns not
   match

 - Pushing different return address onto the stack will have
   calls/returns not match

 - If callstack is deeper than the LBR, only the last entries are
   captured
Tested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      384b6055
  25. 30 1月, 2015 1 次提交
  27. 22 1月, 2015 1 次提交
  29. 29 11月, 2014 1 次提交
    • J
      perf session: Do not fail on processing out of order event · f61ff6c0
      由 Jiri Olsa 提交于 
      Linus reported perf report command being interrupted due to processing
of 'out of order' event, with following error:

  Timestamp below last timeslice flush
  0x5733a8 [0x28]: failed to process type: 3

I could reproduce the issue and in my case it was caused by one CPU
(mmap) being behind during record and userspace mmap reader seeing the
data after other CPUs data were already stored.

This is expected under some circumstances because we need to limit the
number of events that we queue for reordering when we receive a
PERF_RECORD_FINISHED_ROUND or when we force flush due to memory
pressure.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1417016371-30249-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f61ff6c0
  31. 16 11月, 2014 1 次提交
  33. 29 10月, 2014 4 次提交
    • A
      perf session: Add perf_session__deliver_synth_event() · a293829d
      由 Adrian Hunter 提交于 
      Add a function to deliver synthesized events from within a session.

Intel PT decoding works by synthesizing events (primarily branch events)
that can then be consumed by existing tools.  This function will be used
to deliver those events.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414417770-18602-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a293829d
    • A
      perf tools: Use evlist__for_each in a few remaining places · cba9b847
      由 Arnaldo Carvalho de Melo 提交于 
      Where direct use of the longer form using list_for_entry() was being
used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v4fw80flg25nkl8jgeod3ot9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cba9b847
    • A
      perf tools: Add id index · 3c659eed
      由 Adrian Hunter 提交于 
      Add an index of the event identifiers, in preparation for Intel PT.

The event id (also called the sample id) is a unique number
allocated by the kernel to the event created by perf_event_open().  Events
can include the event id by having a sample type including PERF_SAMPLE_ID or
PERF_SAMPLE_IDENTIFIER.

Currently the main use of the event id is to match an event back to the
evsel to which it belongs i.e. perf_evlist__id2evsel()

The purpose of this patch is to make it possible to match an event back to
the mmap from which it was read.  The reason that is useful is because the
mmap represents a time-ordered context (either for a cpu or for a thread).
Intel PT decodes trace information on that basis.  In full-trace mode, that
information can be recorded when the Intel PT trace is read, but in
sample-mode the Intel PT trace data is embedded in a sample and it is in
that case that the "id index" is needed.

So the mmaps are numbered (idx) and the cpu and tid recorded against the id
by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel().

That information is recorded on the perf.data file in the new "id index".
idx, cpu and tid are added to struct perf_sample_id (which is the node of
evlist's hash table to match ids to evsels).  The information can be
retrieved using perf_evlist__id2sid().  Note however this all depends on
having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER,
otherwise ids are not recorded.

The "id index" is a synthesized event record which will be created when
Intel PT sampling is used by calling perf_event__synthesize_id_index().
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3c659eed
    • A
      perf thread: Adopt resolve_callchain method from machine · cc8b7c2b
      由 Arnaldo Carvalho de Melo 提交于 
      Shortening function signature lenght too, since a thread's machine can be
obtained from thread->mg->machine, no need to pass thread, machine.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5wb6css280ty0cel5p0zo2b1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cc8b7c2b
  35. 16 10月, 2014 1 次提交
    • A
      perf session: Add option to copy events when queueing · 54bf53b1
      由 Alexander Yarygin 提交于 
      When processing events the session code has an ordered samples queue
which is used to time-sort events coming in across multiple mmaps. At a
later point in time samples on the queue are flushed up to some
timestamp at which point the event is actually processed.

When analyzing events live (ie., record/analysis path in the same
command) there is a race that leads to corrupted events and parse errors
which cause perf to terminate. The problem is that when the event is
placed in the ordered samples queue it is only a reference to the event
which is really sitting in the mmap buffer. Even though the event is
queued for later processing the mmap tail pointer is updated which
indicates to the kernel that the event has been processed. The race is
flushing the event from the queue before it gets overwritten by some
other event. For commands trying to process events live (versus just
writing to a file) and processing a high rate of events this leads to
parse failures and perf terminates.

Examples hitting this problem are 'perf kvm stat live', especially with
nested VMs which generate 100,000+ traces per second, and a command
processing scheduling events with a high rate of context switching --
e.g., running 'perf bench sched pipe'.

This patch offers live commands an option to copy the event when it is
placed in the ordered samples queue.

Based on a patch from David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1412347212-28237-2-git-send-email-yarygin@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      54bf53b1
  37. 14 10月, 2014 1 次提交
    • A
      perf session: Remove last reference to hists struct · 2a1731fb
      由 Arnaldo Carvalho de Melo 提交于 
      Now perf_session doesn't require that the evsels in its evlist are hists
containing ones.

Tools that are hists based and want to do per evsel events_stats
updates, if at some point this turns into a necessity, should do it in
the tool specific code, keeping the session class hists agnostic.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cli1bgwpo82mdikuhy3djsuy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2a1731fb
  39. 11 10月, 2014 1 次提交
    • A
      perf session: Don't count per evsel events · c2329ade
      由 Arnaldo Carvalho de Melo 提交于 
      PERF_RECORD_SAMPLE was not being counted here and is the only per-evsel
thing anyway, the other events were not mapping to a evsel.

With this we don't require that evsels used with a perf_session need to
have space for hists, like the ones in annotate, report, top.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kzchpz0l1mhrsfpkirz086m2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c2329ade
  41. 10 10月, 2014 1 次提交
    • A
      perf evsel: Add hists helper · 4ea062ed
      由 Arnaldo Carvalho de Melo 提交于 
      Not all tools need a hists instance per perf_evsel, so lets pave the way
to remove evsel->hists while leaving a way to access the hists from a
specially allocated evsel, one that comes with space at the end where
lives the evsel.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4ea062ed
  43. 26 9月, 2014 1 次提交
  45. 14 8月, 2014 2 次提交