- 05 1月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
SH-2A was referencing the old handler that no longer exists, fix it up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 12月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
This is the initial step for converting singlestep handling via ptrace over to hw_breakpoints. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 12月, 2009 2 次提交
-
-
由 Paul Mundt 提交于
This kills off kgdb's breakpoint handler and ties in to the notifier chain instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Presently the hw_breakpoint code is the primary notifier dispatch for breakpoint traps, although it's only UBC traps that are of particular interest there. This patches in a check to allow non-UBC generated breakpoints to pass through down the remainder of the notifier chain, giving things like kgdb a chance at getting notified. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 12月, 2009 4 次提交
-
-
由 Paul Mundt 提交于
This follows the x86 change to select perf events when hw_breakpoint support is enabled. This fixes up build issues where perf events can otherwise be disabled on their own. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The event callback handling has been removed in favour of going through a generic event handler to handle overflows. Follows the x86 change. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We don't actually require this in the cpu_relax() polling case, so just cuddle these around the sleeping version. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This fixes up some crashes with IRQs racing the need_resched() test under QEMU. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 12月, 2009 5 次提交
-
-
由 Heiko Carstens 提交于
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Oleg Nesterov 提交于
Nobody except ptrace itself should use task->ptrace or PT_PTRACED directly, change arch/s390/kernel/traps.c to use the helper. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The elf notes number for the upper register halves is s390 specific. Change the name of the elf notes to include S390. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Roel Kluin 提交于
Return the PTR_ERR of the correct pointer. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 18 12月, 2009 8 次提交
-
-
由 Frederic Weisbecker 提交于
The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: NCyrill Gorcunov <gorcunov@gmail.com> Reported-by: NMichal Marek <mmarek@suse.cz> Reported-by: NAndrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Daney 提交于
Use the new unreachable() macro instead of for(;;); Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: linux-alpha@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Michael Cree 提交于
In the kernel the patch enables configuration of the perf event option, adds the perf_event_open syscall, and includes a minimal architecture specific asm/perf_event.h header file. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Daniele Calore 提交于
This wire up the: fallocate, timerfd_create, timerfd_settime, timerfd_gettime, signalfd4, eventfd2, epoll_create1, dup3, pipe2, inotify_init1, preadv, pwritev and rt_tgsigqueueinfo syscalls for the alpha port. For umount2, alpha have an "old" and "new" version called: oldumount and umount; so ignore umount2. Rebased on top of 6e17e8b9 by Matt Turner. Signed-off-by: NDaniele Calore <orkaan@orkaan.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Suresh Siddha 提交于
John Blackwood reported: > on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded), > and 32 bit (x86) kernel, once you change the irq smp_affinity of an irq > to be less than all cpus in the system, you can never change really the > irq smp_affinity back to be all cpus in the system (0xff) again, > even though no error status is returned on the "/bin/echo ff > > /proc/irq/[n]/smp_affinity" operation. > > This is due to that fact that BAD_APICID has the same value as > all cpus (0xff) on 32bit kernels, and thus the value returned from > set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated > as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes > are made. set_desc_affinity() is already checking if the incoming cpu mask intersects with the cpu online mask or not. So there is no need for the apic op cpu_mask_to_apicid_and() to check again and return BAD_APICID. Remove the BAD_APICID return value from cpu_mask_to_apicid_and() and also fix set_desc_affinity() to return -1 instead of using BAD_APICID to represent error conditions (as cpu_mask_to_apicid_and() can return logical or physical apicid values and BAD_APICID is really to represent bad physical apic id). Reported-by: NJohn Blackwood <john.blackwood@ccur.com> Root-caused-by: NJohn Blackwood <john.blackwood@ccur.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261103386.2535.409.camel@sbs-t61> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
It says Warning: objdump version is older than 2.19 Warning: Skipping posttest. because it used the wrong field from `objdump -v': akpm:/usr/src/25> /opt/crosstool/gcc-4.0.2-glibc-2.3.6/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu-objdump -v GNU objdump 2.16.1 Copyright 2005 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> LKML-Reference: <200912172326.nBHNQaQl024796@imap1.linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
-
由 Pallipadi, Venkatesh 提交于
Commit 83ce4009 did the following change If the TSC is constant and non-stop, also set it reliable. But, there seems to be few systems that will end up with TSC warp across sockets, depending on how the cpus come out of reset. Skipping TSC sync test on such systems may result in time inconsistency later. So, reenable TSC sync test even on constant and non-stop TSC systems. Set, sched_clock_stable to 1 by default and reset it in mark_tsc_unstable, if TSC sync fails. This change still gives perf benefit mentioned in 83ce4009 for systems where TSC is reliable. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091217202702.GA18015@linux-os.sc.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Christoph Hellwig 提交于
Proper Posix O_SYNC handling only made it into 2.6.33, not 2.6.32. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 17 12月, 2009 19 次提交
-
-
由 Ben Dooks 提交于
Add pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver to get DMA-like performance where there are either no free DMA channels or when doing transfers that required both TX and RX data paths. Since this patch requires the addition of an assembly file to hold the FIQ code, we rename the module (instead of adding a rename of the .c file to this patch). We expect most users are loading this via udev and thus there should be no change to the userland configuration. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Linus Torvalds 提交于
The loop condition is fragile: we compare an unsigned value to zero, and then decrement it by something larger than one in the loop. All the callers should be passing in appropriately aligned buffer lengths, but it's better to just not rely on it, and have some appropriate defensive loop limits. Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland Dreier 提交于
Not all awk implementations (including the default awk in Ubuntu 9.10) support POSIX character classes. Since x86-opcode-map.txt is plain ASCII, we can just use explicit ranges for lower case, alphabetic, and alphanumeric characters instead. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <adabphy750b.fsf@roland-alpha.cisco.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Chen Liqin 提交于
Signed-off-by: NCui Bixiong <bixiong@sunnorth.com.cn> Signed-off-by: NChen Liqin <liqin.chen@sunplusct.com>
-
由 Chen Liqin 提交于
Signed-off-by: NCui Bixiong <bixiong@sunnorth.com.cn> Signed-off-by: NChen Liqin <liqin.chen@sunplusct.com> modified: arch/score/include/asm/page.h modified: arch/score/kernel/setup.c modified: arch/score/mm/init.c
-
由 Chen Liqin 提交于
Signed-off-by: NCui Bixiong <bixiong@sunnorth.com.cn> Signed-off-by: NChen Liqin <liqin.chen@sunplusct.com> modified: arch/score/include/asm/cacheflush.h modified: arch/score/mm/cache.c
-
由 Frederic Weisbecker 提交于
perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker It's just wasteful for stacktrace users like perf to walk through every entries on the stack whereas these only accept reliable ones, ie: that the frame pointer validates. Since perf requires pure reliable stacktraces, it needs a stack walker based on frame pointers-only to optimize the stacktrace processing. This might solve some near-lockup scenarios that can be triggered by call-graph tracing timer events. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261024834-5336-2-git-send-regression-fweisbec@gmail.com> [ v2: fix for modular builds and small detail tidyup ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
The current print_context_stack helper that does the stack walking job is good for usual stacktraces as it walks through all the stack and reports even addresses that look unreliable, which is nice when we don't have frame pointers for example. But we have users like perf that only require reliable stacktraces, and those may want a more adapted stack walker, so lets make this function a callback in stacktrace_ops that users can tune for their needs. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Matt Fleming 提交于
If using 64-bit PTEs and 4K pages then each page table has 512 entries (as opposed to 1024 entries with 32-bit PTEs). Unlike MIPS, SH follows the convention that all structures in the page table (pgd_t, pmd_t, pgprot_t, etc) must be the same size. Therefore, 64-bit PTEs require 64-bit PGD entries, etc. Using 2-levels of page tables and 64-bit PTEs it is only possible to map 1GB of virtual address space. In order to map all 4GB of virtual address space we need to adopt a 3-level page table layout. This actually works out better for CONFIG_SUPERH32 because we only waste 2 PGD entries on the P1 and P2 areas (which are untranslated) instead of 256. Signed-off-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Matt Fleming 提交于
Keep the dimensions of the page tables in a separate header file in preparation for allowing a three level page table structure. Signed-off-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
MAX_DMA_CHANNELS is tested for the total number of channels in order to populate an IRQ map. Stub this out completely when no DMA support is enabled -- as used to be the default behaviour before this was generalized for use by the dmaengine code. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Add dmaengine platform device to SH7785. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Add a dmaengine platform device to sh7724, fix DMA channel interrupt numbers. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Ralf Baechle 提交于
Commit 16393192 "sysctl mips/lasat: Remove dead binary sysctl support" obviously wasn't test built ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Martin Michlmayr 提交于
There's no reason for MIPS to select EMBEDDED. In fact, EMBEDDED makes MIPS more awkward to deal with because it makes it different to the majority of architectures for no good reason. [Ralf: Historically disabling EMBEDDED had hid essential options for many MIPS platforms such as serial console and forced crap like VGA support or power managment enabled for platforms where those don't make any sense. The name of the option is also _very_ missleading so many users don't select it even where is was required for a functioning kernel.] Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/663/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
Currently, MIPS kernels silently overwrite kernel command-line parameters hardcoded in CONFIG_CMDLINE by the ones received from firmware. Therefore, using firmware remains the only reliable method to transfer the command-line parameters, which is not always desirable or convenient, and the CONFIG_CMDLINE option is thereby effectively rendered useless. This patch fixes the problem described above and introduces a more flexible scheme of handling the kernel command line, in a manner identical to what is currently used for x86. The default behavior, i.e. when CONFIG_CMDLINE_BOOL is not defined, retains the existing semantics, and firmware command-line arguments override the hardcoded ones. [Ralf: I fixed up all the defconfig files so the stay unaffected by this change.] Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/689/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The platform has never been fully merged Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Acked-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wu Zhangjin 提交于
This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-