- 26 4月, 2007 40 次提交
-
-
由 Stephen Hemminger 提交于
This is an implementation of TCP Illinois invented by Shao Liu at University of Illinois. It is a another variant of Reno which adapts the alpha and beta parameters based on RTT. The basic idea is to increase window less rapidly as delay approaches the maximum. See the papers and talks to get a more complete description. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
It isn't any faster to test a boolean global variable than do a simple check for empty list. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Ostrowski 提交于
pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: NMichal Ostrowski <mostrows@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Zumbiehl 提交于
below you find a patch that fixes a memory leak when a PPPoE socket is release()d after it has been connect()ed, but before the PPPIOCGCHAN ioctl ever has been called on it. This is somewhat of a security problem, too, since PPPoE sockets can be created by any user, so any user can easily allocate all the machine's RAM to non-swappable address space and thus DoS the system. Is there any specific reason for PPPoE sockets being available to any unprivileged process, BTW? After all, you need a packet socket for the discovery stage anyway, so it's unlikely that any unprivileged process will ever need to create a PPPoE socket, no? Allocating all session IDs for a known AC is a kind of DoS, too, after all - with Juniper ERXes, this is really easy, actually, since they don't ever assign session ids above 8000 ... Signed-off-by: NFlorian Zumbiehl <florz@florz.de> Acked-by: NMichal Ostrowski <mostrows@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Zumbiehl 提交于
below you find a patch that (hopefully) fixes a race between an interface going down and a connect() to a peer on that interface. Before, connect() would determine that an interface is up, then the interface could go down and all entries referring to that interface in the item_hash_table would be marked as ZOMBIEs and their references to the device would be freed, and after that, connect() would put a new entry into the hash table referring to the device that meanwhile is down already - which also would cause unregister_netdevice() to wait until the socket has been release()d. This patch does not suffice if we are not allowed to accept connect()s referring to a device that we already acked a NETDEV_GOING_DOWN for (that is: all references are only guaranteed to be freed after NETDEV_DOWN has been acknowledged, not necessarily after the NETDEV_GOING_DOWN already). And if we are allowed to, we could avoid looking through the hash table upon NETDEV_GOING_DOWN completely and only do that once we get the NETDEV_DOWN ... mostrows: pppoe_flush_dev is called on NETDEV_GOING_DOWN and NETDEV_DOWN to deal with this "late connect" issue. Ideally one would hope to notify users at the "NETDEV_GOING_DOWN" phase (just to pretend to be nice). However, it is the NETDEV_DOWN scan that takes all the responsibility for ensuring nobody is hanging around at that time. Signed-off-by: NFlorian Zumbiehl <florz@florz.de> Acked-by: NMichal Ostrowski <mostrows@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Zumbiehl 提交于
below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: NFlorian Zumbiehl <florz@florz.de> Acked-by: NMichal Ostrowski <mostrows@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Getting warnings becuase skb_store_bits has skb as constant, but the function overwrites it. Looks like const was on the wrong side. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The following is leftover from earlier change in net-2.6.22. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P. Waskiewicz Jr 提交于
Add a packet socket option to allow the orig_dev index to be returned to userspace when passing traffic through a decapsulated device, such as the bonding driver. This is very useful for layer 2 traffic being able to report which physical device actually received the traffic, instead of having the encapsulating device hide that information. The new option is called PACKET_ORIGDEV. Signed-off-by: NPeter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
This also fixes memory leak in error path. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Heffner 提交于
Add IP(V6)_PMTUDISC_PROBE value for IP(V6)_MTU_DISCOVER. This option forces us not to fragment, but does not make use of the kernel path MTU discovery. That is, it allows for user-mode MTU probing (or, packetization-layer path MTU discovery). This is particularly useful for diagnostic utilities, like traceroute/tracepath. Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Heffner 提交于
Adds a check in ip6_fragment() mirroring ip_fragment() for packets that we can't fragment, and sends an ICMP Packet Too Big message in response. Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Switch ingress queueing back to use ingress_lock. qdisc_lock_tree now locks both the ingress and egress qdiscs on the device. All changes to data that might be used on both ingress and egress needs to be protected by using qdisc_lock_tree instead of manually taking dev->queue_lock. Additionally the qdisc stats_lock needs to be initialized to ingress_lock for ingress qdiscs. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Since we're now holding the rtnl during the entire dump operation, we can remove qdisc_tree_lock, whose only purpose is to protect dump callbacks from concurrent changes to the qdisc tree. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Don't reinitialize the callback mutex the netlink_kernel_create caller handed in, it is supposed to already be initialized and could already be held by someone. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Since we're now holding the rtnl during the entire dump operation, we can remove additional locking for rtnl protected data. This patch does that for all simple cases (dev_base_lock for dev_base walking, RCU protection for FIB rule dumping). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Hold rtnl_mutex during the entire netlink dump operation. This allows to simplify locking in the dump callbacks, since they can now rely on that no concurrent changes happen. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Switch cb_lock to mutex and allow netlink kernel users to override it with a subsystem specific mutex for consistent locking in dump callbacks. All netlink_dump_start users have been audited not to rely on any side-effects of the previously used spinlock. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Don't fallback to group 0 if no instance can be found for the given group. This potentially confuses the listener and is not what the user configured. Also remove the ring buffer spamming that happens when rules are set up before the logging daemon is started. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
All LOG targets always use their internal logging function nowadays, so remove the incorrect error message and handle real errors (!= -EEXIST) by failing to load. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When mangling packets forwarded to a HW checksumming capable device, offload recalculation of the checksum instead of doing it in software. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart De Schuymer 提交于
The attached patch adds gratuitous arp filtering, more precisely: it allows checking that the IPv4 source address matches the IPv4 destination address inside the ARP header. It also adds a check for the hardware address type when matching MAC addresses (nothing critical, just for better consistency). Signed-off-by: NBart De Schuymer <bdschuym@pandora.be> Acked-by: NCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Milner 提交于
The attached patch by Michael Milner adds support for using iptables and ip6tables on bridged traffic encapsulated in ppoe frames, similar to what's already supported for vlan. Signed-off-by: NMichael Milner <milner@blissisland.ca> Signed-off-by: NBart De Schuymer <bdschuym@pandora.be> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This fills in missing documentation for dccp_sock fields. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This prints the value of the parsed Elapsed Time when received via a Timestamp Echo option [RFC 4342, 13.3]. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This fixes an error in the calculation of t_ipi when X converges towards very low sending rates (between 1 and 64 bytes per second). Although this case may not sound likely, it can be reproduced by connecting, hitting enter (1 byte sent) and waiting for some time, during which the nofeedback timer halves the sending rate until finally it reaches the region 1..64 bytes/sec. Computing X is handled correctly (tested separately); but by dividing X _before_ entering the calculation of t_ipi, X becomes zero as a result. This in turn triggers a BUG condition caught in scaled_div(). Fixed by replacing with equivalent statement and explicit typecast for good measure. Calculation verified and effect of patch tested - reduced never below 1 byte per 64 seconds afterwards, i.e. not allowing divide-by-zero. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Allow s390 to properly override the generic __div64_32() implementation by: 1) Using obj-y for div64.o in s390's makefile instead of lib-y 2) Adding the weak attribute to the generic implementation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
skb_copy_expand changes the headroom, so it needs to adjust the header offsets by the difference between the old and the new value. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Rusty added a new 'stats' field to struct net_device. loopback driver can use it instead of declaring another struct net_device_stats This saves some memory. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
This patch checks kmem_cache_create() error and aborts loading module on failure. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
For case of bridging pseudo devices, the get created/destroyed (Xen) need to allow setting address to any valid value. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Need to tell STP daemon about more events, like any time a device is added even when it is down. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
The RSTP daemon needs to be able to flush all dynamic forwarding entries in the case of topology change. This is a temporary interface. It will change to a netlink interface before RSTP daemon is officially released. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Instead of hashing the whole Ethernet address, it should be faster to just use the last 4 bytes. Add a random salt value to the hash to make it more difficult to construct worst case DoS hash chains. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-