Add more optimized XTS code for aesni_intel in 64-bit mode, for smaller stack
usage and boost for speed.

tcrypt results, with Intel i5-2450M:
256-bit key
        enc     dec
16B     0.98x   0.99x
64B     0.64x   0.63x
256B    1.29x   1.32x
1024B   1.54x   1.58x
8192B   1.57x   1.60x

512-bit key
        enc     dec
16B     0.98x   0.99x
64B     0.60x   0.59x
256B    1.24x   1.25x
1024B   1.39x   1.42x
8192B   1.38x   1.42x

I chose not to optimize smaller than block size of 256 bytes, since XTS is
practically always used with data blocks of size 512 bytes. This is why
performance is reduced in tcrypt for 64 byte long blocks.

Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add more optimized XTS code for camellia-aesni-avx, for smaller stack usage
and small boost for speed.

tcrypt results, with Intel i5-2450M:
        enc     dec
16B     1.10x   1.01x
64B     0.82x   0.77x
256B    1.14x   1.10x
1024B   1.17x   1.16x
8192B   1.10x   1.11x

Since XTS is practically always used with data blocks of size 512 bytes or
more, I chose to not make use of camellia-2way for block sized smaller than
256 bytes. This causes slower result in tcrypt for 64 bytes.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change cast6-avx to use the new XTS code, for smaller stack usage and small
boost to performance.

tcrypt results, with Intel i5-2450M:
        enc     dec
16B     1.01x   1.01x
64B     1.01x   1.00x
256B    1.09x   1.02x
1024B   1.08x   1.06x
8192B   1.08x   1.07x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change twofish-avx to use the new XTS code, for smaller stack usage and small
boost to performance.

tcrypt results, with Intel i5-2450M:
        enc     dec
16B     1.03x   1.02x
64B     0.91x   0.91x
256B    1.10x   1.09x
1024B   1.12x   1.11x
8192B   1.12x   1.11x

Since XTS is practically always used with data blocks of size 512 bytes or
more, I chose to not make use of twofish-3way for block sized smaller than
128 bytes. This causes slower result in tcrypt for 64 bytes.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds AVX optimized XTS-mode helper functions/macros and converts
serpent-avx to use the new facilities. Benefits are slightly improved speed
and reduced stack usage as use of temporary IV-array is avoided.

tcrypt results, with Intel i5-2450M:
        enc     dec
16B     1.00x   1.00x
64B     1.00x   1.00x
256B    1.04x   1.06x
1024B   1.09x   1.09x
8192B   1.10x   1.09x
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that CryptoAPI has support for CMAC, we can add support for AES-CMAC-96
(rfc4494).

Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI.

This work is based on Tom St Denis' earlier patch,
 http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2

Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Without these, kernel log shows:
[    5.984881] alg: No test for cipher_null (cipher_null-generic)
[    5.985096] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    5.985170] alg: No test for compress_null (compress_null-generic)
[    5.985297] alg: No test for digest_null (digest_null-generic)
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the gcm cipher used by rfc4543 does not complete request immediately,
the authentication tag is not copied to destination buffer. Patch adds
correct async logic for this case.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The GMAC code assumes that dst==src, which causes problems when trying to add
rfc4543(gcm(aes)) test vectors.

So fix this code to work when source and destination buffer are different.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch allows timeriomem_rng to be used via devicetree.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

timeriomem_rng only supports a single device instance.  This patch
enables multiple timeriomem_rng devices to coexist as well as adds
some additional error checking.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y.
Older versions of bintuils do not support the pclmulqdq instruction. The
PCLMULQDQ gas macro is used instead.
Signed-off-by: NSandy Wu <sandyw@twitter.com>
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds a driver for random number generator present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: NDom Cobley <popcornmix@gmail.com>
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

checkstack reports report_deco_status(), report_ccb_status() as
particularly excessive stack users.  Move their lookup tables
off the stack and put them in .rodata.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

commit 2af8f4a2 "crypto: caam - coccicheck fixes" added error
return values yet neglected to change the type from unsigned.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto: sha512 - Create module providing optimized SHA512 routines using SSSE3, AVX or AVX2 instructions.

We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA512 x86_64 assembly routines.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA512 x86_64 assembly routine optimized with SSE, AVX and
AVX2's RORX instructions.  Speedup of 70% or more has been
measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA512 x86_64 assembly routine optimized with SSE and AVX instructions.
Speedup of 60% or more has been measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA512 x86_64 assembly routine optimized with SSSE3 instructions.
Speedup of 40% or more has been measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Other SHA512 routines may need to use the generic routine when
FPU is not available.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto: sha256 - Create module providing optimized SHA256 routines using SSSE3, AVX or AVX2 instructions.

We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA256 x86_64 assembly routine optimized with SSE, AVX and
AVX2's RORX instructions.  Speedup of 70% or more has been
measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA256 x86_64 assembly routine optimized with SSE and AVX instructions.
Speedup of 60% or more has been measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Provides SHA256 x86_64 assembly routine optimized with SSSE3 instructions.
Speedup of 40% or more has been measured over the generic implementation.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Other SHA256 routine may need to use the generic routine when
FPU is not available.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

These modules require AVX support in assembler, so add new check to Makefile
for this.

Other option would be to use CONFIG_AS_AVX inside source files, but that would
result dummy/empty/no-fuctionality modules being created.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Using devm_ioremap_resource() can make the code cleaner and simpler.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Following AEAD algo templates are updated for '.type' initialization.
	(a) authenc(hmac(sha224),cbc(aes))
	(b) authenc(hmac(sha384),cbc(aes))
	(c) authenc(hmac(sha224),cbc(des3_ede))
	(d) authenc(hmac(sha384),cbc(des3_ede))
	(e) authenc(hmac(sha224),cbc(des))
	(f) authenc(hmac(sha384),cbc(des))
Signed-off-by: NVakul Garg <vakul@freescale.com>
Reviewed-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This change is required for post SEC-5.0 devices which have RNG4.
Setting RDB in security configuration register allows CAAM to use the
"Random Data Buffer" to be filled by a single request. The Random Data
Buffer is large enough for ten packets to get their IVs from a single
request. If the Random Data Buffer is not enabled, then each IV causes a
separate request, and RNG4 hardware cannot keep up resulting in lower
IPSEC throughput if random IVs are used.
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix
the following build warning when CONFIG_PM_SLEEP is not selected.

drivers/char/hw_random/exynos-rng.c:147:12: warning: 'exynos_rng_runtime_suspend' defined but not used [-Wunused-function]
drivers/char/hw_random/exynos-rng.c:157:12: warning: 'exynos_rng_runtime_resume' defined but not used [-Wunused-function]

Add CONFIG_PM_RUNTIME to suspend/resume functions to fix the build
error. It is because UNIVERSAL_DEV_PM_OPS macro is related to both
CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME.

drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_suspend' undeclared here (not in a function)
drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_resume' undeclared here (not in a function)
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reported-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NMihnea Dobrescu-Balaur <mihneadb@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SAHARA2 HW module is included in the i.MX27 SoC from
Freescale. It is capable of performing cipher algorithms
such as AES, 3DES..., hashing and RNG too.

This driver provides support for AES-CBC and AES-ECB
by now.
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Seeing from the comment, there should be three reasons for removing request_mem_region.
Change the comment "two" to "three".
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Acked-by: NRob Landley <rob@landley.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Kconfig entry for CAAM's hash algorithm implementations has always
selected CRYPTO_AHASH. But there's no corresponding Kconfig symbol.

It seems it was intended to select CRYPTO_HASH, like other crypto
drivers do. That would apparently (indirectly) select CRYPTO_HASH2,
which would enable the ahash functionality this driver uses.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Reviewed-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

module_platform_driver() makes the code simpler by eliminating boilerplate
code.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>