- 05 6月, 2010 6 次提交
-
-
由 Eric Dumazet 提交于
Its better to make a route lookup in appropriate namespace. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I believe a moderate SYN flood attack can corrupt RFS flow table (rps_sock_flow_table), making RPS/RFS much less effective. Even in a normal situation, server handling short lived sessions suffer from bad steering for the first data packet of a session, if another SYN packet is received for another session. We do following action in tcp_v4_rcv() : sock_rps_save_rxhash(sk, skb->rxhash); We should _not_ do this if sk is a LISTEN socket, as about each packet received on a LISTEN socket has a different rxhash than previous one. -> RPS_NO_CPU markers are spread all over rps_sock_flow_table. Also, it makes sense to protect sk->rxhash field changes with socket lock (We currently can change it even if user thread owns the lock and might use rxhash) This patch moves sock_rps_save_rxhash() to a sock locked section, and only for non LISTEN sockets. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben McKeegan 提交于
Fix bug in multilink fragment size calculation introduced by commit 9c705260 "ppp: ppp_mp_explode() redesign" Signed-off-by: NBen McKeegan <ben@netservers.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
syncookies default to on since e994b7c9 (tcp: Don't make syn cookies initial setting depend on CONFIG_SYSCTL). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Only check pfc bits in hang logic if PFC is enabled. Previously, if DCB was enabled but PFC was disabled the incorrect pause bits would be checked. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
xfrm triggers a warning if dst_pop() drops a refcount on a noref dst. This patch changes dst_pop() to skb_dst_pop(). skb_dst_pop() drops the refcnt only on a refcounted dst. Also we don't clone the child dst_entry, so it is not refcounted and we can use skb_dst_set_noref() in xfrm_output_one(). Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2010 1 次提交
-
- 03 6月, 2010 8 次提交
-
-
由 Jeff Kirsher 提交于
Based on original patch from Shirley Ma <xma@us.ibm.com> Return IXGBE_ERR_RAR_INDEX when RAR index is out of range, instead of returning IXGBE_SUCCESS. CC: Shirley Ma <xma@us.ibm.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
access skb->data safely we should use skb_header_pointer() and skb_store_bits() to access skb->data to handle small or non-linear skbs. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> ---- net/sched/act_pedit.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This exposes the port number to userland through sysfs. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Probably no one has used this driver on big-endian systems, since it was setting up descriptor swapping if CONFIG_BIG_ENDIAN is set, which it never is, since that symbol is not mentioned anywhere else in the kernel source. Switch this test to a check for __BIG_ENDIAN so it has a chance at working. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
copy_to_user() returns the number of bytes remaining but we want to return a negative error code here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
copy_from_user() returns the number of bytes remaining but we should return -EFAULT here. The error code gets returned to the user. Both old_capi_manufacturer() and capi20_manufacturer() had other places that already returned -EFAULT so this won't break anything. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The bitwise negate is intended here. With the logical negate the condition is always false. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
A single shared memory region used to communicate with firmware is mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be able to identify which port they are addressing in order to use the correct sub-region. Currently we use the PCI function number, but the PCI address may be virtualised. Use the CS_PORT_NUM register field defined for just this purpose. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2010 15 次提交
-
-
由 Changli Gao 提交于
use skb_header_pointer() to dereference data safely the original skb->data dereference isn't safe, as there isn't any skb->len or skb_is_nonlinear() check. skb_header_pointer() is used instead in this patch. And when the skb isn't long enough, we terminate the function u32_classify() immediately with -1. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniele Lacamera 提交于
For large values of rtt, 2^rho operation may overflow u32. Clamp down the increment to 2^16. Signed-off-by: NDaniele Lacamera <root@danielinux.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
fix the wrong checksum when addr isn't in old_addr/mask For TCP and UDP packets, when addr isn't in old_addr/mask we don't do SNAT or DNAT, and we should not update layer 4 checksum. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> ---- net/sched/act_nat.c | 4 ++++ 1 file changed, 4 insertions(+) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Bénard 提交于
* in the actual driver, calling fec_stop and fec_enet_init doesn't allow to have a working network interface at resume (where a ifconfig down and up is required to recover the interface) * by using fec_enet_close and fec_enet_open, this patch solves this problem and handle the case where the link changed between suspend and resume * this patch also disable clock at suspend and reenable it at resume Signed-off-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Sutter 提交于
This way, RX DMA overruns (actually being caused by overrun of the 512byte input FIFO) show up in ifconfig output. The rx_fifo_errors counter is unused otherwise. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Sutter 提交于
This patch completes commit 89d71a66 which missed this spot, as it seems. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Sutter 提交于
By calling korina_restart(), the IRQ handler tries to disable the interrupt it's currently serving. This leads to a deadlock since disable_irq() waits for any running IRQ handlers to finish before returning. This patch addresses the issue by turning korina_restart() into a workqueue task, which is then scheduled when needed. Reproducing the deadlock is easily done using e.g. GNU netcat to send large amounts of UDP data to the host running this driver. Note that the same problem (and fix) applies to TX FIFO underruns, but apparently these are less easy to trigger. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
If a skb is received on an inactive bond that does not meet the special cases checked for by skb_bond_should_drop it should only be delivered to exact matches as the comment in netif_receive_skb() says. However because null_or_bond could also be null this is not always true. This patch renames null_or_bond to orig_or_bond and initializes it to orig_dev. This keeps the intent of null_or_bond to pass frames received on VLAN interfaces stacked on bonding interfaces without invalidating the statement for null_or_orig. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
The vlan device should not copy the slave or master flags from the real device. It is not in the bond until added nor is it a master. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
To make get/set netlink VF_PORT truly symmetrical, we need to keep track of what items are set and only return those items on get. Previously, the driver wasn't differentiating between a set of attr with a NULL string, for example, and not setting the attr at all. We only want to return the NULL string if the attr was actually set with a NULL string. Otherwise, don't return the attr. Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The regression is caused by: commit 4327ba43 bnx2: Fix netpoll crash. If ->open() and ->close() are called multiple times, the same napi structs will be added to dev->napi_list multiple times, corrupting the dev->napi_list. This causes free_netdev() to hang during rmmod. We fix this by calling netif_napi_del() during ->close(). Also, bnx2_init_napi() must not be in the __devinit section since it is called by ->open(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Packets going through __xfrm_route_forward() have a not refcounted dst entry, since we enabled a noref forwarding path. xfrm_lookup() might incorrectly release this dst entry. It's a bit late to make invasive changes in xfrm_lookup(), so lets force a refcount in this path. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The dialog token allocator has apparently been broken since b83f4e15 ("mac80211: fix deadlock in sta->lock") because it got moved out under the spinlock. Fix it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Daniel reported that the paged RX changes had broken blockack request frame processing due to using data that wasn't really part of the skb data. Fix this using skb_copy_bits() for the needed data. As a side effect, this adds a check on processing too short frames, which previously this code could do. Reported-by: NDaniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NDaniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bruno Randolf 提交于
We can wake all queues after a chip reset since everything should be set up and we are ready to transmit. If we don't do that we might end up starting up with stopped queues, not beeing able to transmit. (This started to happen after "ath5k: clean up queue manipulation" but since periodic calibration also stopped and started the queues this effect was hidden most of the time). This way we can also get rid of the superfluous ath5k_reset_wake() function. Signed-off-by: NBruno Randolf <br1@einfach.org> Acked-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 6月, 2010 9 次提交
-
-
由 Julia Lawall 提交于
The function inittiger is only called from nj_init_card, where a lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock_irqrestore when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock_irqsave(...) ... when != spin_unlock_irqrestore fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Add missing validate_addr hook Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Convert TX hook to netdev_tx_t type Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
virtio-net bounces buffer allocations off to a thread if it can't allocate buffers from the atomic pool. However, if posting buffers still requires atomic buffers, this is unlikely to succeed. Fix by passing in the proper gfp_t parameter. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
The current code fails on ppc as hdr.timeout is not being converted to le32. Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anatolij Gustschin 提交于
Fixes build error caused by the OF device_node pointer being moved into struct device. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Commit: c720c7e8 missed these. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Correct sk_forward_alloc handling for error_queue would need to use a backlog of frames that softirq handler could not deliver because socket is owned by user thread. Or extend backlog processing to be able to process normal and error packets. Another possibility is to not use mem charge for error queue, this is what I implemented in this patch. Note: this reverts commit 29030374 (net: fix sk_forward_alloc corruptions), since we dont need to lock socket anymore. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant) introduced a performance regression, because stackptr array is shared by all cpus, adding cache line ping pongs. (16 cpus share a 64 bytes cache line) Fix this using alloc_percpu() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-By: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-