to #28892961

commit 11c4cd07ba111a09f49625f9e4c851d83daf0a22 upstream.

Rather than calling remap_pfn_range() when a region is mmap'd, setup
a vm_ops handler to support dynamic faulting of the range on access.
This allows us to manage a list of vmas actively mapping the area that
we can later use to invalidate those mappings.  The open callback
invalidates the vma range so that all tracking is inserted in the
fault handler and removed in the close handler.
Reviewed-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Fixes: CVE-2020-12888
[ shile: fixed conflicts in vfio_pci_private.h ]
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

fix #27418285

We introduce a boot parametter 'deferred_meminit' for defer
page init feature. Default it is disabled, and we can pass
'deferred_meminit' to enable it.
Signed-off-by: Nchenxiangzuo <cxz18821786681@linux.alibaba.com>
Reviewed-by: NXu Yu <xuyu@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NShile Zhang <shile.zhang@linux.alibaba.com>

fix #29051137

commit 5906056e52e9ee5e130d880443e83016f892b5dd upstream

While at it, add a few comments which config options #ifdef
and #else statements refer to.

Fixes: 86d333a8cc7f (cpufreq: intel_pstate: Add base_frequency attribute)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

to #28736503

commit 405a5d2b2762f2a9813efdee93274d4e7bf607a1 upstream

Basically IORING_OP_POLL_ADD command and async armed poll handlers
for regular commands don't touch io_wq_work, so only REQ_F_WORK_INITIALIZED
is set, can we do io_wq_work copy and restore.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 18bceab101adde8f38de76016bc77f3f25cf22f4 upstream

Some file descriptors use separate waitqueues for their f_ops->poll()
handler, most commonly one for read and one for write. The io_uring
poll implementation doesn't work with that, as the 2nd poll_wait()
call will cause the io_uring poll request to -EINVAL.

This affects (at least) tty devices and /dev/random as well. This is a
big problem for event loops where some file descriptors work, and others
don't.

With this fix, io_uring handles multiple waitqueues.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 65a6543da386838f935d2f03f452c5c0acff2a68 upstream

While testing io_uring in arm, we found sometimes io_sq_thread() keeps
polling io requests even though there are not inflight io requests in
block layer. After some investigations, found a possible race about
io_kiocb.flags, see below race codes:
  1) in the end of io_write() or io_read()
    req->flags &= ~REQ_F_NEED_CLEANUP;
    kfree(iovec);
    return ret;

  2) in io_complete_rw_iopoll()
    if (res != -EAGAIN)
        req->flags |= REQ_F_IOPOLL_COMPLETED;

In IOPOLL mode, io requests still maybe completed by interrupt, then
above codes are not safe, concurrent modifications to req->flags, which
is not protected by lock or is not atomic modifications. I also had
disassemble io_complete_rw_iopoll() in arm:
   req->flags |= REQ_F_IOPOLL_COMPLETED;
   0xffff000008387b18 <+76>:    ldr     w0, [x19,#104]
   0xffff000008387b1c <+80>:    orr     w0, w0, #0x1000
   0xffff000008387b20 <+84>:    str     w0, [x19,#104]

Seems that the "req->flags |= REQ_F_IOPOLL_COMPLETED;" is  load and
modification, two instructions, which obviously is not atomic.

To fix this issue, add a new iopoll_completed in io_kiocb to indicate
whether io request is completed.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 310672552f4aea2ad50704711aa3cdd45f5441e9 upstream

If the request is still hashed in io_async_task_func(), then it cannot
have been canceled and it's pointless to check. So save that check.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7cdaf587de7c6f494b8433fded19f7728e70e1ef upstream

If requests can be submitted and completed inline, we don't need to
initialize whole io_wq_work in io_init_req(), which is an expensive
operation, add a new 'REQ_F_WORK_INITIALIZED' to determine whether
io_wq_work is initialized and add a helper io_req_init_async(), users
must call io_req_init_async() for the first time touching any members
of io_wq_work.

I use /dev/nullb0 to evaluate performance improvement in my physical
machine:
  modprobe null_blk nr_devices=1 completion_nsec=0
  sudo taskset -c 60 fio  -name=fiotest -filename=/dev/nullb0 -iodepth=128
  -thread -rw=read -ioengine=io_uring -direct=1 -bs=4k -size=100G -numjobs=1
  -time_based -runtime=120

before this patch:
Run status group 0 (all jobs):
   READ: bw=724MiB/s (759MB/s), 724MiB/s-724MiB/s (759MB/s-759MB/s),
   io=84.8GiB (91.1GB), run=120001-120001msec

With this patch:
Run status group 0 (all jobs):
   READ: bw=761MiB/s (798MB/s), 761MiB/s-761MiB/s (798MB/s-798MB/s),
   io=89.2GiB (95.8GB), run=120001-120001msec

About 5% improvement.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit c5b856255cbc3b664d686a83fa9397a835e063de upstream

We can assume that O_NONBLOCK is always honored, even if we don't
have a ->read/write_iter() for the file type. Also unify the read/write
checking for allowing async punt, having the write side factoring in the
REQ_F_NOWAIT flag as well.

Cc: stable@vger.kernel.org
Fixes: 490e89676a52 ("io_uring: only force async punt if poll based retry can't handle it")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit f5fa38c59cb0b40633dee5cdf7465801be3e4928 upstream

io_uring is the only user of io-wq, and now it uses only io-wq callback
for all its requests, namely io_wq_submit_work(). Instead of storing
work->runner callback in each instance of io_wq_work, keep it in io-wq
itself.

pros:
- reduces io_wq_work size
- more robust -- ->func won't be invalidated with mem{cpy,set}(req)
- helps other work
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit d4c81f38522f3e7f4be1b472ef9988d0ed7f3696 upstream

Remove io_link_work_cb() -- the last custom work.func.
Not the prettiest thing, but works. Instead of queueing a linked timeout
in io_link_work_cb() mark a request with REQ_F_QUEUE_TIMEOUT and do
enqueueing based on the flag in io_wq_submit_work().
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit ac45abc0e2a8ed16ecc0eea039fe762ddfefbcad upstream

In preparation of getting rid of work.func, this removes almost all
custom instances of it, leaving only io_wq_submit_work() and
io_link_work_cb(). And the last one will be dealt later.

Nothing fancy, just routinely remove *_finish() function and inline
what's left. E.g. remove io_fsync_finish() + inline __io_fsync() into
io_fsync().

As no users of io_req_cancelled() are left, delete it as well. The patch
adds extra switch lookup on cold-ish path, but that's overweighted by
nice diffstat and other benefits of the following patches.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3af73b286ccee493dc055fc58da02b2dc7a5304d upstream

Relying on having a specific work.func is dangerous, even if an opcode
handler set it itself. E.g. io_wq_assign_next() can modify it.

io_close() sets a custom work.func to indicate that
__close_fd_get_file() was already called. Fortunately, there is no bugs
with io_wq_assign_next() and close yet.

Still, do it safe and always be prepared to be called through
io_wq_submit_work(). Zero req->close.put_file in prep, and call
__close_fd_get_file() IFF it's NULL.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit a8c73c1a614f6da6c0b04c393f87447e28cb6de4 upstream

Use kvfree() to free the pages and vmas, since they are allocated by
kvmalloc_array() in a loop.

Fixes: d4ef647510b1 ("io_uring: avoid page allocation warnings")
Signed-off-by: NDenis Efremov <efremov@linux.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200605093203.40087-1-efremov@linux.comSigned-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit efe68c1ca8f49e8c06afd74b699411bfbb8ba1ff upstream

Account for the number of provided buffers when validating the address
range.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit dddb3e26f6d88c5344d28cb5ff9d3d6fa05c4f7a upstream

We already have the buffer selected, but we should set the iter list
again.

Cc: stable@vger.kernel.org # v5.7
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit d2b6f48b691ed67569786c332f0173b918d3fd1b upstream

Fail recv/send in case of IORING_SETUP_IOPOLL earlier during prep,
so it'd be done only once. Removes duplication as well
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit ec65fea5a8d7a82d3137dd2a44197eb577da111f upstream

io_openat_prep() and io_openat2_prep() are identical except for how
struct open_how is built. Deduplicate it with a helper.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 25e72d1012b30bdff712b563e6141a4f311d28d6 upstream

build_open_how() is just adjusting open_flags/mode. Do it once during
prep. It looks better than storing raw values for the future.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3232dd02af65f2d01be641120d2a710176b0c7a7 upstream

IORING_SETUP_IOPOLL is defined only for read/write, other opcodes should
be disallowed, otherwise it'll get an error as below. Also refuse
open/close with SQPOLL, as the polling thread wouldn't know which file
table to use.

RIP: 0010:io_iopoll_getevents+0x111/0x5a0
Call Trace:
 ? _raw_spin_unlock_irqrestore+0x24/0x40
 ? do_send_sig_info+0x64/0x90
 io_iopoll_reap_events.part.0+0x5e/0xa0
 io_ring_ctx_wait_and_kill+0x132/0x1c0
 io_uring_release+0x20/0x30
 __fput+0xcd/0x230
 ____fput+0xe/0x10
 task_work_run+0x67/0xa0
 do_exit+0x353/0xb10
 ? handle_mm_fault+0xd4/0x200
 ? syscall_trace_enter+0x18c/0x2c0
 do_group_exit+0x43/0xa0
 __x64_sys_exit_group+0x18/0x20
 do_syscall_64+0x60/0x1e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
[axboe: allow provide/remove buffers and files update]
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit fd2206e4e97b5bae422d9f2f9ebbc79bc97e44a5 upstream

A previous commit enabled this functionality, which also enabled O_PATH
to work correctly with io_uring. But we can't safely close the ring
itself, as the file handle isn't reference counted inside
io_uring_enter(). Instead of jumping through hoops to enable ring
closure, add a "soft" ->needs_file option, ->needs_file_no_error. This
enables O_PATH file descriptors to work, but still catches the case of
trying to close the ring itself.
Reported-by: NJann Horn <jannh@google.com>
Fixes: 904fbcb115c8 ("io_uring: remove 'fd is io_uring' from close path")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7b53d59859bc932b37895d2d37388e7fa29af7a5 upstream

Overflowed requests in io_uring_cancel_files() should be shed only of
inflight and overflowed refs. All other left references are owned by
someone else.

If refcount_sub_and_test() fails, it will go further and put put extra
ref, don't do that. Also, don't need to do io_wq_cancel_work()
for overflowed reqs, they will be let go shortly anyway.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit bfe68a221905de37e65394a6d58c1e5f3e545d2f upstream

Offset timeouts wait not for sqe->off non-timeout CQEs, but rather
sqe->off + number of prior inflight requests. Wait exactly for
sqe->off non-timeout completions
Reported-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 360428f8c0cd857006a8a3f515946285370489ac upstream

Separate flushing offset timeouts io_commit_cqring() by moving it into a
helper. Just a preparation, makes following patches clearer.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 6f88cc176a3358c54bb6c38c8afee3f3a42faf54 upstream

The io_uring interfaces have been replaced by do_statx() and are no
longer needed.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit e62753e4e2926f249d088cc0517be5ed4efec6d6 upstream

Calling statx directly both simplifies the interface and avoids potential
incompatibilities between sync and async invokations.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0018784fc84f636d473a0d2a65a34f9d01893c0a upstream

This is a prepatory patch to allow io_uring to invoke statx directly.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 1d9e1288039a47dc1189c3c1fed5cf3c215e94b7 upstream

Separate statx data from open in io_kiocb. No functional changes.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0bf0eefdab52d9f9f3a1eeda32a4fc7afe4e9219 upstream

io_close() was punting async manually to skip grabbing files. Use
REQ_F_NO_FILE_TABLE instead, and pass it through the generic path
with -EAGAIN.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0451894522108d6c72934aff6ef89023743a9ed4 upstream

io_commit_cqring() assembly doesn't look good with extra code handling
drained requests. IOSQE_IO_DRAIN is slow and discouraged to be used in
a hot path, so try to minimise its impact by putting it into a helper
and doing a fast check.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 56080b02ed6e71fbc0add2d05a32ed7361dd736a upstream

SQEs are user writable, don't read sqe->off twice in io_timeout_prep()
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 733f5c95e6fdabd05b8dfc15e04512809c9652c2 upstream

Move spin_lock_irq() earlier to have only 1 call site of it in
io_timeout(). It makes the flow easier.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 4518a3cc273cf82efdd36522fb1f13baad173c70 upstream

In io_uring_cancel_files(), after refcount_sub_and_test() leaves 0
req->refs, it calls io_put_req(), which would also put a ref. Call
io_free_req() instead.

Cc: stable@vger.kernel.org
Fixes: 2ca10259b418 ("io_uring: prune request from overflow list on flush")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 6b668c9b7fc6fc0c313cdaee8b75d17f4d954ab5 upstream

When IORING_SETUP_SQPOLL is enabled, io_ring_ctx_wait_and_kill() will wait
for sq thread to idle by busy loop:

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cond_resched();

Above loop isn't very CPU friendly, it may introduce a short cpu burst on
the current cpu.

If ctx->refs is dying, we forbid sq_thread from submitting any further
SQEs. Instead they just get discarded when we exit.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0cdaf760f42eb8e8a714c1cc017423e5da6d4936 upstream

A submission is "async" IIF it's done by SQPOLL thread. Instead of
passing @async flag into io_submit_sqes(), deduce it from ctx->flags.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit f2a8d5c7a218b9c24befb756c4eb30aa550ce822 upstream

Add IORING_OP_TEE implementing tee(2) support. Almost identical to
splice bits, but without offsets.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9dafdfc2f0a3ae551711098de3d7b621a469f11a upstream

export do_tee() for use in io_uring
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit c11368a57be460de889696f6ff8815fbcacf4db2 upstream

req->flags stores all sqe->flags. After checking that sqe->flags are
valid set if IOSQE* flags, no need to double check it, just forward them
all.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9f13c35b33fddb186beab9ef21c555a01e45f4d7 upstream

io_file_put() deals with flushing state's file refs, adding "state" to
its name makes it a bit clearer. Also, avoid double check of
state->file in __io_file_get() in some cases.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3bfa5bcb26f0b52d7ae8416aa0618fff21aceaaf upstream

We only need apoll in the one section, do the juggling with the work
restoration there. This removes a special case further down as well.

No functional changes in this patch.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>