- 01 2月, 2013 13 次提交
-
-
由 Ilija Hadzic 提交于
This function is not limited to r100, but it can dump a (raw) packet for any ASIC. Rename it accordingly and move its declaration to radeon.h Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
WAIT_REG_MEM on register does not allow the use of PFP. Enforce this restriction when checking packets sent from userland. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
vline packet parsing function for R600 and Evergreen+ are the same, except that they use different registers. Factor out the algorithm into a common function that uses register table passed from ASIC-specific caller. This reduces ASIC-specific function to (trivial) setup of register table and call into the common function. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
Once we factored out radeon_cs_packet_parse function, evergreen_cs_next_is_pkt3_nop and r600_cs_next_is_pkt3_nop functions became identical, so they can be factored out into a common function. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
We now have a common radeon_cs_packet_parse function that is good for all ASICs. Hook it up and eliminate ASIC-specific versions. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
CS packet parse functions have a lot of in common across all ASICs. Implement a common function and take care of small differences between families inside the function. This patch is a prep for major refactoring and consolidation of CS parsing code. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
Preparatory patch: patches to follow will touch a piece of code that had broken indentication, so fix it before touching it. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
length_dw field was assigned twice. While at it, move user_ptr assignment together with all other assignments to p->chunks[i] structure to make the code more readable. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
For large VM page table updates, we can sometimes generate more packets than there is space on the ring. This happens more readily with the DMA ring since it is 64K (vs 1M for the CP). For now, switch back to the CP. For the next kernel, I have a patch to utilize IBs for VM PT updates which alleviates this problem. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58354Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If the requested number of DWs on the ring is larger than the size of the ring itself, return an error. In testing with large VM updates, we've seen crashes when we try and allocate more space on the ring than the total size of the ring without checking. This prevents the crash but for large VM updates or bo moves of very large buffers, we will need to break the transaction down into multiple batches. I have patches to use IBs for the next kernel. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 liu chuansheng 提交于
When kzalloc() failed in radeon_user_framebuffer_create(), need to call object_unreference() to match the object_reference(). Signed-off-by: Nliu chuansheng <chuansheng.liu@intel.com> Signed-off-by: Nxueminsu <xuemin.su@intel.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Some chips seem to need a little delay after blacking out the MC before the requests actually stop. Stop DMAR errors reported by Shuah Khan. Reported-by: NShuah Khan <shuahkhan@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 31 1月, 2013 3 次提交
-
-
由 Alex Deucher 提交于
Some chips seem to need a little delay after blacking out the MC before the requests actually stop. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 https://bugs.freedesktop.org/show_bug.cgi?id=57567Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Mikko Tiihonen 提交于
Make sure at least one RB is enabled in r6xx_remap_render_backend() to avoid an division by zero in some corner cases. See: https://bugzilla.redhat.com/show_bug.cgi?id=892233Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Need to adjust the backend map depending on which RB is enabled. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=892233Reported-by: NMikko Tiihonen <mikko.tiihonen@iki.fi> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 30 1月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
vbios says external TMDS while the board is actually internal TMDS. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60037Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 28 1月, 2013 2 次提交
-
-
由 Alex Deucher 提交于
Newer versions of mesa emit this. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christopher Staite 提交于
Force the crtc mem requests on/off immediately rather than waiting for the double buffered updates to kick in. Seems we miss the update in certain conditions. Also handle the DCE6 case. Signed-off-by: NChristopher Staite <chris@yourdreamnet.co.uk> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 25 1月, 2013 1 次提交
-
-
由 Michel Dänzer 提交于
Fixes GPU hang during DMA ring IB test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 24 1月, 2013 3 次提交
-
-
由 Ilija Hadzic 提交于
If one (but not both) allocations of p->chunks[].kpage[] in radeon_cs_parser_init fail, the error path will free the successfully allocated page, but leave a stale pointer value in the kpage[] field. This will later cause a double-free when radeon_cs_parser_fini is called. This patch fixes the issue by forcing both pointers to NULL after kfree in the error path. The circumstances under which the problem happens are very rare. The card must be AGP and the system must run out of kmalloc area just at the right time so that one allocation succeeds, while the other fails. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 xueminsu 提交于
drm_mode_addfb() expects fb_create return error code instead of NULL. Signed-off-by: Nxueminsu <xuemin.su@intel.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Jerome Glisse 提交于
Aruba and newer gpu does not need the avivo cursor work around, quite the opposite this work around lead to corruption. agd5f: check DCE6 rather than ARUBA since the issue is DCE version specific rather than family specific. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 18 1月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
This reverts commit d025e9e2. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.htmlSigned-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 1月, 2013 3 次提交
-
-
由 Jerome Glisse 提交于
Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.htmlReported-by: NEldad Zack <eldad@fogrefinery.com> Tested-by: NEldad Zack <eldad@fogrefinery.com> Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 11 1月, 2013 5 次提交
-
-
由 Jerome Glisse 提交于
We were checking the index against the size of the relocation buffer instead of against the last index. This fix kernel segfault when userspace submit ill formated command stream/relocation buffer pair. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Ilija Hadzic 提交于
Index into chunks[] array doesn't look right. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
parser->chunks[.].kpage[.] is not always kmalloc-ed by the parser initialization, so parser_fini should not try to kfree it if it didn't allocate it. This patch fixes a kernel oops that can be provoked in UMS mode. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
In UMS mode parser->rdev is NULL, so dereferencing will cause an oops. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 1月, 2013 1 次提交
-
-
由 Seung-Woo Kim 提交于
Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem makes memory leak. release function of dma-buf cannot be called because f_count of dma-buf increased by importing gem and gem ref count cannot be decrease because of exported dma-buf. So I add dma_buf_put() for imported gem come from its own gem into each drivers having prime_import and prime_export capabilities. With this, only gem ref count is increased if importing gem exported from gem of same driver. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NKyungmin.park <kyungmin.park@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 1月, 2013 1 次提交
-
-
由 Maarten Lankhorst 提交于
vga-switcheroo with apple-gmux does not switch correctly on my system. The PCI configuration space is not restored correctly, resulting in MSI not working after switch. Only useful item in dmesg is: [ 33.922807] radeon 0000:01:00.0: Refused to change power state, currently in D3 I did some testing, dumping the difference in ms between first succesful switch from D3 to D0, and it seems that there is slightly more than 20 ms difference when the device is re-enabled through vga-switcheroo. So bump the re-enable d3 delay to 20 ms to handle this, which fixes msi not working on my system after switcheroo-ing. Default d3_delay value is PCI_PM_D3_WAIT, 10 ms. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 05 1月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
Was using the r7xx format. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 04 1月, 2013 5 次提交
-
-
由 Alex Deucher 提交于
- r6xx actually uses a slightly different packet format, although both formats seem to work ok. - r7xx doesn't have the count multiple of 2 limitation. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No change in functionality as we currently set all the reset flags. v2: fix typo Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No change in functionality as we currently set all the reset flags. Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No change in functionality as we currently set all the reset flags. Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No change in functionality as we currently set all the reset flags. Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-