Add some delay to avoid reading CSR TXCOUNT too early after
updating it.

For more info about this HW glitch see:
http://lists.arm.linux.org.uk/lurker/message/20090325.150843.f515c02f.en.html
http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100129/10ba0f8b/attachment.el
http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/09cdb3b4/attachment.el
http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/08b5b249/attachment.el

First applied: "Fix soft lockup in at91 udc driver"
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5965Signed-off-by: NAnti Sullin <anti.sullin@artecdesign.ee>
Signed-off-by: NHarro Haan <hrhaan@gmail.com>
Acked-by: NRemy Bohmer <linux@bohmer.net>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Final version of the patch that adds support for RS485 communications to the atmel_serial driver.

The patch has been already sent and discussed on both linux-kernel and linux-arm-kernel mailing lists several times.

Many people collaborated to improve and test the code:
Tested-by: NSebastian Heutling <Sebastian.Heutling@who-ing.de>
Tested-by: NBernhard Roth <br@pwrnet.de>
Reviewed-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NMichael Trimarchi <michael@evidence.eu.com>
Signed-off-by: NRick Bronson <rick@efn.org>
Signed-off-by: NSebastian Heutling <Sebastian.Heutling@who-ing.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This introduce the field f_max into the mmci_platform_data,
making it possible to pass in a desired block clocking frequency
from a board configuration. This is often more desirable than
using a module parameter. We keep the module parameter as a
fallback as well as the default frequency specified for this
parameter if a parameter is not provided.

This also adds some kerneldoc style documentation to the
platform data struct in mmci.h.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds support for an 8bit wide bus to the card (data lines
MCIDAT0 through 7 exist) on the ST Micro version and alters the
U300 platform to support this. Also add some ST_ prefix to the
ST-specific registers.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Implement arch specific arch_get_memory_phys_device function and
initialize phys_device for each memory section.  That way we finally can
tell which piece of memory belongs to which physical device.

This makes s390's /sys/devices/system/memory/memoryX/phys_device display
the correct thing?
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/sys/devices/system/memory/memoryX/phys_device is supposed to contain the
number of the physical device that the corresponding piece of memory
belongs to.

In case a physical device should be replaced or taken offline for whatever
reason it is necessary to set all corresponding memory pieces offline.
The current implementation always sets phys_device to '0' and there is no
way or hook to change that.  Seems like there was a plan to implement that
but it wasn't finished for whatever reason.

So add a weak function which architectures can override to actually set
the phys_device from within add_memory_block().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the dummy LL interface to the LL interface change
introduced by commit daab433c03c15fd642c71c94eb51bdd3f32602c8.
This fixes the build failure occurring after that commit when
enabling ISDN_DRV_GIGASET but neither ISDN_I4L nor ISDN_CAPI.

Impact: bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pp->active_link is not reliable when FBS is enabled.
Both PORT_SCR_ACT and PORT_CMD_ISSUE should be checked
because mixed NCQ and non-NCQ commands may be in flight.
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

HP is recycling both DMI_PRODUCT_NAME and DMI_BIOS_VERSION making
ahci_broken_suspend() trigger for later products which are not
affected by the original problems.  Match BIOS date instead of version
and add references to bko's so that full information can be found
easier later.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=15462Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: tigerfishdaisy@gmail.com
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

bko#15481 shows that we're missing some NVIDIA ahci PCI IDs.  Peer
Chen confirms that IDs 0x580-0x58f are reserved for cases where Linux
ID option is selected in the BIOS and are only used for mcp65-73.  Add
0x0581-0x058f.

  http://bugzilla.kernel.org/show_bug.cgi?id=15481Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes UDP socket refcnt bugs in the pppol2tp driver.

A bug can cause a kernel stack trace when a tunnel socket is closed.

A way to reproduce the issue is to prepare the UDP socket for L2TP (by
opening a tunnel pppol2tp socket) and then close it before any L2TP
sessions are added to it. The sequence is

Create UDP socket
Create tunnel pppol2tp socket to prepare UDP socket for L2TP
  pppol2tp_connect: session_id=0, peer_session_id=0
L2TP SCCRP control frame received (tunnel_id==0)
  pppol2tp_recv_core: sock_hold()
  pppol2tp_recv_core: sock_put
L2TP ZLB control frame received (tunnel_id=nnn)
  pppol2tp_recv_core: sock_hold()
  pppol2tp_recv_core: sock_put
Close tunnel management socket
  pppol2tp_release: session_id=0, peer_session_id=0
Close UDP socket
  udp_lib_close: BUG

The addition of sock_hold() in pppol2tp_connect() solves the problem.

For data frames, two sock_put() calls were added to plug a refcnt leak
per received data frame. The ref that is grabbed at the top of
pppol2tp_recv_core() must always be released, but this wasn't done for
accepted data frames or data frames discarded because of bad UDP
checksums. This leak meant that any UDP socket that had passed L2TP
data traffic (i.e. L2TP data frames, not just L2TP control frames)
using pppol2tp would not be released by the kernel.

WARNING: at include/net/sock.h:435 udp_lib_unhash+0x117/0x120()
Pid: 1086, comm: openl2tpd Not tainted 2.6.33-rc1 #8
Call Trace:
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c101b871>] ? warn_slowpath_common+0x71/0xd0
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c101b8e3>] ? warn_slowpath_null+0x13/0x20
 [<c119e9b7>] ? udp_lib_unhash+0x117/0x120
 [<c11598a7>] ? sk_common_release+0x17/0x90
 [<c11a5e33>] ? inet_release+0x33/0x60
 [<c11577b0>] ? sock_release+0x10/0x60
 [<c115780f>] ? sock_close+0xf/0x30
 [<c106e542>] ? __fput+0x52/0x150
 [<c106b68e>] ? filp_close+0x3e/0x70
 [<c101d2e2>] ? put_files_struct+0x62/0xb0
 [<c101eaf7>] ? do_exit+0x5e7/0x650
 [<c1081623>] ? mntput_no_expire+0x13/0x70
 [<c106b68e>] ? filp_close+0x3e/0x70
 [<c101eb8a>] ? do_group_exit+0x2a/0x70
 [<c101ebe1>] ? sys_exit_group+0x11/0x20
 [<c10029b0>] ? sysenter_do_call+0x12/0x26
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures the PHY correctly completes its reset before
setting register values.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When transmitting L2TP frames, we derive the outgoing interface's UDP
checksum hardware assist capabilities from the tunnel dst dev. This
can sometimes be NULL, especially when routing protocols are used and
routing changes occur. This patch just checks for NULL dst or dev
pointers when checking for netdev hardware assist features.

BUG: unable to handle kernel NULL pointer dereference at 0000000c
IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/class/net/lo/operstate
Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]

Pid: 0, comm: swapper Not tainted (2.6.32.8 #1)
EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3
EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp]
EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000
ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000)
Stack:
 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800
<0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680
<0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f
Call Trace:
 [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic]
 [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic]
 [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic]
 [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2
 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e
 [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6
 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221
 [<c11df682>] ? ip_forward_finish+0x2e/0x30
 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9
 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404
 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e]
 [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e]
 [<c1047eff>] ? sched_clock_local+0x15/0x11b
 [<c11c1095>] ? net_rx_action+0x96/0x195
 [<c1035750>] ? __do_softirq+0xaa/0x151
 [<c1035828>] ? do_softirq+0x31/0x3c
 [<c10358fe>] ? irq_exit+0x26/0x58
 [<c1004b21>] ? do_IRQ+0x78/0x89
 [<c1003729>] ? common_interrupt+0x29/0x30
 [<c101ac28>] ? native_safe_halt+0x2/0x3
 [<c1008c54>] ? default_idle+0x55/0x75
 [<c1009045>] ? c1e_idle+0xd2/0xd5
 [<c100233c>] ? cpu_idle+0x46/0x62
Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08
EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac
CR2: 000000000000000c
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a driver for SMSC's LAN7500 family of USB 2.0
to gigabit ethernet adapters.  It's loosely based on the smsc95xx
driver but the device registers for LAN7500 are completely different.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes following warning introduced by commit
12bac0d9 ("proc: warn on non-existing
proc entries"):

WARNING: at /work/mips-linux/make/linux/fs/proc/generic.c:316 __xlate_proc_name+0xe0/0xe8()
name 'RBHMA4X00/RTL8019'
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stanse found that one error path (when alloc_skb fails) in netdev_tx
omits to unlock hw_priv->hwlock. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Tristram Ha <Tristram.Ha@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct a potential array overrun due to an off by one error in the
range check on the CAPI CONNECT_REQ CIPValue parameter.
Found and reported by Dan Carpenter using smatch.

Impact: bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we were to dynamically register/unregister leds and have udev or other
daemons handle the leds class uevents, we would be notified of the adding of a
new LED and if the daemon immediately tries to open one of the attributes of
the led device, it would fail with a "no such file or directory" error since
this the attributes are not yet created. Fix this by switching attributes to be
class-wide, such that the driver core will register these attributes with
device_add_attrs and then emit the kobject_uevent ADD signal.
Signed-off-by: NFainelli <ffainelli@freebox.fr>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Properly return backlight registration error to parent.
Mark struct backlight_ops as const.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Acked-by: Harald Welte <laforge@gnumonks.org> (registration failure)
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Properly return backlight registration error to parent.
Mark struct backlight_ops as const.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Reviewed-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Check newly registered backlight_device for error and properly
return error to parent
Mark struct backlight_ops as const.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> (constify struct backlight_ops)
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Check newly registered backlight_device for error and properly
return error to parent.
Mark struct backlight_ops as const.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

This adds the MacBook 1,1 2,1 3,1 4,1 and 4,2 to the DMI tables.
Signed-off-by: NEvan McClain <evan.mcclain@gatech.edu>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

The driver wrongly sets default state for LEDs that don't specify
default-state property.

Currently the driver handles default state this way:

memset(&led, 0, sizeof(led));
for_each_child_of_node(np, child) {
	state = of_get_property(child, "default-state", NULL);
	if (state) {
		if (!strcmp(state, "keep"))
			led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
		...
	}
	ret = create_gpio_led(&led, ...);
}

Which means that all LEDs that do not specify default-state will inherit
the last value of the default-state property, which is wrong.

This patch fixes the issue by moving LED's template initialization into
the loop body.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

This patch adds an LED driver to support the Dell Activity LED on the
Dell Latitude 2100 netbook and future products to come. The Activity LED
is visible externally in the lid so classroom instructors can observe it
from a distance. The driver uses the sysfs led_class and provides a
standard LED interface.

Signed-off by: Bob Rodgers <Robert_Rodgers@dell.com>
Signed-off-by: NLouis Davis <Louis_Davis@dell.com>
Signed-off-by: Jim Dailey <Jim_Dailey@dell.com>, Developers
Acked-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Remove the need for "depends on LEDS_CLASS" by wrapping the affected
config options in an if/endif block. Similar for "depends on LEDS_TRIGGERS".

LEDS_COBALT_RAQ still has a "depends on LEDS_CLASS=y" since it cannot
be selected to build as a module.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

As each led device gets registered a kernel message gets printed. In
an embedded system with a number of leds this can produce a lot
of output that just looks like noise.

Change the message type to KERN_DEBUG since it might be useful
in the dmesg output "after" booting.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make pci_device_id also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

The ALIX2 LED driver and the CS5535 GPIO drivers share the same I/O
range which causes a conflict if they're both enabled. Fix this for now
by adding Kconfig dependencies. While at it, also drop the EXPERIMENTAL
flag, as the code has been around for awhile already.

Note that this is a hack. At some point, a real platform support for
this board should be added which handles the LEDs via the leds-gpio
driver.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Values such as max_brightness should be set before backlights are
registered, but the current API doesn't allow that. Add a parameter to
backlight_device_register and update drivers to ensure that they
set this correctly.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

check_fb from backlight_ops lacks a reference to the backlight_device
that's being referred to. Add this parameter so a backlight_device
can be mapped to a single framebuffer, especially if the same driver
handles multiple devices on a single system.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Stanse found an ommitted pci_dev_puts on error path in progearbl_probe.
pmu_dev and sb_dev are gotten, but never put when
backlight_device_register fails.

So unify fail paths and put the devs when the failure occurs.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

The Epson LCD L4F00242T03 is mounted on the Freescale i.MX31 PDK board. 
Based upon Marek Vasut work in l4f00242t03.c, this driver provides
basic init and power on/off functionality for this device through the
sysfs lcd interface.

Unfortunately Datasheet for this device are not available and
all the control sequences sent to the display were copied from the
freescale driver that in the i.MX31 Linux BSP.

As in the i.MX31PDK board the core and io suppliers are voltage
regulators, that functionality is embedded here, but not strict.
Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Stanse found that one error path (when alloc_skb fails) in netdev_tx
omits to unlock hw_priv->hwlock. Fix that by moving away from unlock in
each fail path. Unlock at one place instead.

Introduced in 94a819f8
(pcmcia: assert locking to struct pcmcia_device)
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up
(invisible if cat to console but shown by less or while looking at a dump
 file).  These are due to hid_debug_event() adding strlen()+1 bytes to the ring
buffer (e.g. including the trailing '\0').  Any roll-over causes a '\0' as well
as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size
while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

From: Julia Lawall <julia@diku.dk>

SAB82532_ISR0_TCD is declared in drivers/serial/subsab.h as relating to a
status register, while SAB82532_IMR0_TCD is declared in the same file as
relating to a mask register.  The latter seems more appropriate for the
interrupt_mask0 field, and follows the strategy for initializing this field
elsewhere in the same file.

Both SAB82532_ISR0_TCD and SAB82532_IMR0_TCD have the same value.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>