This creates a new display hook called create_connector. The purpose is
to allow the display driver to create its own drm_connector instead of
using the exynos_drm_connector. This moves things closer to completely
removing the exynos_drm_connector abstraction.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes all of the suspend/resume logic from the individual
drivers and consolidates it in drm_drv. This consolidation reduces the
number of functions which enable/disable the hardware to just one -- the
dpms callback. This ensures that we always power up/down in a consistent
manner.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch separates the fimd_activate function into poweron/poweroff
functions to be more consistent with the other drivers in exynos drm. It
also properly cleans up after failures in poweron. The functions have
also been shuffled around such that they are all in the same
spot in the file and poweron/poweroff can be called from the dpms function.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch implements the dpms display callback for the DP driver.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch moves the exynos_drm_display implementation from fimd into
the dp driver. This will allow for tighter integration of the dp driver
into the exynos drm driver.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch moves the code from video/ to drm/. This is required the DP
driver needs to power on/off in the correct order in relation to fimd.
This will also allow the DP driver to participate in drm modeset as well
as provide accurate connection detection and edid.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes a few fimd_context members which are either entirely
unused or unneeded.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch uses the mode passed into mode_set to configure fimd instead
of directly using the panel from context. This will allow us to move
the exynos_drm_display implementation out of fimd, where it doesn't
belong.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds a new manager callback for mode_fixup and pipes it
through exynos_drm_crtc. This will allow the manager drivers to
alter the mode during modeset.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds a mode_set callback to the manager operations which
sets the crtc's current mode to the manager driver. This will allow the
fimd  driver to set its mode using values from drm, instead of the dt.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch moves the code which disables unused crtc planes from the
encoder to the crtc. Since there is a 1:1 encoder/crtc mapping in
exynos, the only valid crtc change the pre-existing code could catch is
disconnecting an active crtc from the encoder. Thus it is functionally
equivalent to just disable all planes attached to a crtc when the crtc
is disabled.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch changes the manual copying of mode to adjusted_mode in
mode_fixup to use drm_mode_copy instead of handling things manually.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch trims exynos_drm_hdmi out of the driver. The reason it
existed in the first place was to make up for the mixture of
display/overlay/manager ops being spread across hdmi and mixer. With
that code now rationalized, mixer and hdmi map directly to
exynos_drm_crtc and exynos_drm_encoder, respectively. Since there is a
1:1 mapping, we no longer need this layer.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The i2c client was previously being passed into the hdmi driver via a
dedicated i2c driver, and then a global variable. This patch removes all
of that and just uses the device tree to get the i2c_client. This patch
also properly references the client so we don't lose it before we're
done with it.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
[seanpaul changed to phandle lookup instead of using of node name]
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch splits display and manager from subdrv. The result is that
crtc functions can directly call into manager callbacks and encoder
functions can directly call into display callbacks. This will allow
us to remove the exynos_drm_hdmi shim and support mixer/hdmi & fimd/dp
with common code.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Change all instances of possible_crtcs in the exynos drm driver to be
unsigned long. This matches the type used in the drm layer.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes the dpms state tracking in encoder. This
state is at best confusing and at worst incorrect since the display
drivers can turn on and off without propagating the value.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch renames the display_op power_on to dpms to accurately reflect
what the function does.

The side-effect of this patch is that the new hdmi dpms callback is now
invoked twice in the dpms path. This is safe and will be dealt with when
the exynos_drm shim goes away.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes the call from encoder dpms into connector dpms (which
will then call back into encoder dpms through the helper function). The
callback is likely to keep connector->dpms in the right state when
initiating dpms from crtc or encoder, but this isn't the right way to do
it. This patch is the first step towards rationalizing power management
in the exynos drm driver.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes the apply() manager callback in favor of putting the
relevant commits in the individual drivers. This will mitigate some of
the difference between the suspend/resume path and the dpms path
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch changes the manager ops callbacks from accepting the subdrv
device pointer to taking a pointer to the manager. This will allow us
to move closer to decoupling manager/display from subdrv, and subsequently
decoupling the crtc/plane from the encoder.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch implements the initialize callback in the hdmi and mixer
manager. This allows us to get rid of drm_dev in the drm_hdmi level and
track it in the mixer and hdmi drivers. This is one of the things
holding back the complete removal of the drm_hdmi layer.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch implements the intitialize manager op in fimd. This will
allow us to keep track of drm_dev in context instead of using subdev,
which in turn makes it easier to remove subdev from fimd.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds an initialize function to the manager and display
operations. This allows them to keep track of drm_device in their
local context, as well as adds an initialization hook right after
the encoder is created.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch merges overlay_ops into manager_ops. In all cases,
overlay_ops is implemented in the same place as manager ops, it doesn't
serve a functional purpose, and doesn't make things more clear.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NStephane Marchesin <marcheu@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now that the drm_display_mode also provides aspect
ratio for all resolutions, this patch adds its usage
to set the active aspect ratio of AVI info frame
packets as per CEA-861-D standard's Table 9.

This is also needed to abide by the 7-27
compliance test of HDMI.
Signed-off-by: NShirish S <s.shirish@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds support for the below mentioned
pixel clocks in Exynos5250.
Without them, following display modes won¡¯t
be supported:

71 MHz 	- 1280x800@60Hz RB
73.25 MHz 	- 800x600@120Hz RB
88.75 MHz 	- 1440x900@60Hz RB
115.5 MHz 	- 1024x768@120Hz RB
119 MHz 	- 1680x1050@60Hz RB
Signed-off-by: NShirish S <s.shirish@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The following commit [0] fixed a use-after-free, but left the subdrv open
in the error path.

[0] commit 6ca605f7
drm/exynos: Fix freeing issues in exynos_drm_drv.c
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Acked-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since Daniel documented things with a sledge hammer, we got lots of
nice backtraces in suspend/resume operations, I've check the callers
of this and they all seems safe to me,

This fixes one set of warns I reported.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The locking in drm_fb_helper_initial_config is a bit troublesome for a
few reasons:

- We can't just wrap the entire function up into modeset locks since
  the fbdev registration might call down into fbcon code, which then
  through our ->set_par implementation needs to be able to grab all
  modeset locks. So we'd have a neat deadlock.

- This implies though that all current callers don't hold any modeset
  locks by necessity, so we have free reign to grab any modeset locks
  we need to grab.

- The private state of the fbdev helper doesn't need any protection
  through locks, since once we have the fbdev registered it is mostly
  invariant or protected through the modeset locking in ->set_par and
  other callbacks. We can fully rely on driver having non-racy setup
  sequences here. For the initial config computation we actually may
  not grab locks since drivers which provide their own magic sauce
  (like i915) might need to grab locks themselves.

- We should grab locks though when we probe outputs. Currently there's
  not much risk, but already now userspace could start poking at sysfs
  files and so probe concurrently. I expect that in the future driver
  init will be much more async, and since probing is really
  time-consuming this is a prime candidate.

- We must not hold any crtc->mutex locks while calling probe functions
  since those might need to lock a crtc for e.g. load detection. i915
  is such a driver.

Also it's the probing calls which hit upon piles of new locking
asserts I've recently added in

commit 62ff94a5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 63951385
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

Hence the right fix is to grab the mode_config mutex, but only that
and only right around the probe calls.

It seems to be sufficient to shut up all the locking WARNINGs I see on
i915 and nouveau in drm_fb_helper_initial_config.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We have two calling contexts for thise function:

- In the crtc helper code itself as part of the ->set_config
  implementation. In this calling context all modeset locks are
  already held, as they should.

- In drivers not implementing fastboot before the fbdev/fbcon setup
  and initialization. This has been added for all drivers in

  commit 76a39dbf
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Sun Jan 20 23:12:54 2013 +0100

      drm/fb-helper: don't disable everything in initial_config

  In this calling context we do not hold any modeset locks since the
  immediately following call to initialize the fbev emulation grabs
  all these locks themselves.

- There are two exceptions to the above rule: shmob doesn't have fbdev
  emulation support. I've manually checked the callchain up to the
  driver load function and no kms locks are held.

The right fix therefore is to split this helper into an internal and
external version and add the required locking to the function exported
to drivers.

This remedies locking inconsistencies exposed by me adding locking
WARNs as part of the recent kerneldoc abi polishing done in

commit 62ff94a5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 63951385
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

v2: It helps when I actually git add the entire thing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Summary of what's included:

- SGX MMU support
- SGX IRQ handling (Page faults and blitter fences)
- Minor Cedarview and Poulsbo unification
- Work queue for ASLE interrupt work
- Various cleanups, style fixes and removal of dead code

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: remove stub .open/postclose
  drm/gma500: Code cleanup - inline documentation
  drm/gma500: Code cleanup - style fixes
  drm/gma500: Code cleanup - removal of centralized exiting of function
  drm/gma500/cdv: Cedarview display cleanups
  drm/gma500: Unify encoder mode fixup
  drm/gma500: Unify _get_core_freq for cdv and psb
  drm/gma500: Move asle interrupt work into a work task
  drm/gma500: Remove dead code
  drm/gma500: Add backing type and base align to psb_gem_create()
  drm/gma500: Remove unused ioctls
  drm/gma500: Always trap MMU page faults
  drm/gma500: Hook up the MMU
  drm/gma500: Add first piece of blitter code
  drm/gma500: Give MMU code it's own header file
  drm/gma500: Add support for SGX interrupts
  drm/gma500: Make SGX MMU driver actually do something

Not sure why git didn't flag this, but the result of automerge
from 3.14-rc7 screwed up the radeon init procedure.

Reported-by: Fireburn on #radeon
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge straggling core drm patches.

* 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel:
  drm: Fix use-after-free in the shadow-attache exit code
  drm/fb-helper: Do the 'max_conn_count' zero check
  drm: Check if the allocation has succeeded before dereferencing newmode
  drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par()
  drm/edid: request HDMI underscan by default

The sg_table made when gem cma is created isn't used anywhere. The sgt
of struct drm_gem_cma_object will have only sg_tabel imported.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.

* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: init TTM dev_mapping in ttm_bo_device_init()
  drm: use anon-inode instead of relying on cdevs
  drm: add pseudo filesystem for shared inodes

Linux 3.14-rc7

Backmerge to help out Intel guys.

Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)

Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.

* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
  drm/imx: remove drm_mode_connector_detach_encoder harder
  drm: kerneldoc polish for drm_crtc.c
  drm: kerneldoc polish for drm_crtc_helper.c
  drm: drop error code for drm_helper_resume_force_mode
  drm/crtc-helper: remove LOCKING from kerneldoc
  drm: remove return value from drm_helper_mode_fill_fb_struct
  drm/doc: Fix misplaced </para>
  drm: remove drm_display_mode->private_size
  drm: polish function kerneldoc for drm_modes.[hc]
  drm/modes: drop maxPitch from drm_mode_validate_size
  drm/modes: drop return value from drm_display_mode_from_videomode
  drm/modes: remove drm_mode_height/width
  drm: extract drm_modes.h for drm_crtc.h functions
  drm: move drm_mode related functions into drm_modes.c
  drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
  drm/doc: Integrate drm_modes.c kerneldoc
  drm/kms: rip out drm_mode_connector_detach_encoder
  drm/doc: Add function reference documentation for drm_mm.c
  drm/doc: Overview documentation for drm_mm.c
  drm/mm: Remove MM_UNUSED_TARGET
  ...

- fine-grained display power domains for byt (Imre)
- runtime pm prep patches for !hsw from Paulo
- WiZ hashing flag updates from Ville
- ppgtt setup cleanup and enabling of full 4G range on bdw (Ben)
- fixes from Jesse for the inherited intial config code
- gpu reset code improvements from Mika
- per-pipe num_planes refactoring from Damien
- stability fixes around bdw forcewake handling and other bdw w/a from Mika
  Ken
- and as usual a pile of smaller fixes all over

* 'drm-intel-next' of git://git.freedesktop.org/git/drm-intel: (107 commits)
  drm/i915: Go OCD on the Makefile
  drm/i915: Implement command buffer parsing logic
  drm/i915: Refactor shmem pread setup
  drm/i915: Avoid div by zero when pixel clock is large
  drm/i915: power domains: add vlv power wells
  drm/i915: factor out intel_set_cpu_fifo_underrun_reporting_nolock
  drm/i915: vlv: factor out valleyview_display_irq_install
  drm/i915: sanity check power well sw state against hw state
  drm/i915: factor out reset_vblank_counter
  drm/i915: sanitize PUNIT register macro definitions
  drm/i915: vlv: keep first level vblank IRQs masked
  drm/i915: check pipe power domain when reading its hw state
  drm/i915: check port power domain when reading the encoder hw state
  drm/i915: get port power domain in connector detect handlers
  drm/i915: add port power domains
  drm/i915: add noop power well handlers instead of NULL checking them
  drm/i915: split power well 'set' handler to separate enable/disable/sync_hw
  drm/i915: add init power domain to always-on power wells
  drm/i915: move power domain macros to intel_pm.c
  drm/i915: Disable full ppgtt by default
  ...