Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAndoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAndoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to http://zc0302.sourceforge.net/zc0302.php, we have some hints
about what each zc3xx register means.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sonixb:   Bad initialization of sensor for 352x288 mode.
                (from Hans de Goede)
sonixj:   Clean-up source.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sonixb:   Better gain for ov6650.
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sonixb:   640x480 mode for sn9c103 - ov7630.
Signed-off-by: NAndoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

gspca:    Protect dq_callback() against simultaneous USB exchanges.
          Temporary buffer for USB exchanges added in the device struct.
(all)     Use a temporary buffer for all USB exchanges.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

gspca:    Empty the application queues on streamoff ioctl.
          streamon/off and qbuf ioctls may be done by any application.
          Don't handle MJPEG pixel format as JPEG.
                (thanks to Hans de Goede)
          Authorize reqbufs ioctl when streaming.
          Bad mutex unlock in poll() when streaming problem.
                (thanks to Mauro Carvalho Chehab)
          Don't handle 'webcam disconnected' in stream off.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAndoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sonixb:   Do auto gain for tas5110 / ov6650 sensors.
pac207:   Move the auto_gain function to gspca.
gspca:    New function gspca_auto_gain_n_exposure().
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

vc032x:   Light frequency was not initialized.
          Change the pixel format of bridge VC0321 to V4L2_PIX_FMT_YUV420
              ('YU12').
          Set a bridge to all webcams.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds a simple platform camera device. Useful for testing
cameras with SoC camera host drivers. Only one single pixel format
and resolution combination is supported.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is V3 of the SuperH Mobile CEU soc_camera driver.

The CEU hardware block is configured in a transparent data fetch
mode, frames are captured from the attached camera and written to
physically contiguous memory buffers provided by the newly added
videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors.

 Changes since V2:
 - remove SUPERH Kconfig dependency
 - move sh_mobile_ceu.h to include/media
 - add board callback support with enable_camera()/disable_camera()
 - add support for declare_coherent_memory
 - rework video memory limit
 - more verbose error messages

 Changes since V1:
 - fixed the CEU driver to work with the newly updated patches
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is V3 of the physically contiguous videobuf queues patch.
Useful for hardware such as the SuperH Mobile CEU which doesn't
support scatter gatter bus mastering.

Since it may be difficult to allocate large chunks of physically
contiguous memory after some uptime due to fragmentation, this code
allocates memory using dma_alloc_coherent(). Architectures supporting
dma_declare_coherent_memory() can easily avoid fragmentation issues
by using dma_declare_coherent_memory() to force dma_alloc_coherent()
to allocate from a certain pre-allocated memory area.

 Changes since V2
  - use dma_handle for physical address
  - use "scatter gather" instead of "scatter gatter"

 Changes since V1:
  - use dev_err() instead of pr_err()
  - remember size in struct videobuf_dma_contig_memory
  - keep struct videobuf_dma_contig_memory in .c file
  - let videobuf_to_dma_contig() return dma_addr_t
  - implement __videobuf_sync()
  - return statements, white space and other minor fixes
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Use "scatter gather" instead of "scatter gatter".
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The SuperH Mobile CEU hardware supports 16-bit width bus,
so extend the soc_camera code with SOCAM_DATAWIDTH_16.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch moves the spinlock handling from soc_camera.c to the actual
camera host driver. The spinlock_alloc/free callbacks are replaced with
code in init_videobuf(). So far all camera host drivers implement their
own spinlock_alloc/free methods anyway, and videobuf_queue_core_init()
BUGs on a NULL spinlock argument, so, new camera host drivers will not
forget to provide a spinlock when initialising their videobuf queues.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Makes SoC camera videobuf independent. Includes all necessary changes for
PXA camera driver (currently the only driver using soc_camera in the mainline).
These changes are important for the future soc_camera based drivers.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix build with CONFIG_INPUT_EVDEV=n (Bug #11042).
Thanks to Toralf Frster <toralf.foerster@gmx.de> for reporting.

Thanks-to: Toralf Frster <toralf.foerster@gmx.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix compiler warning caused by a typo in the tda10023_attach dummy routine.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module.  Also
added the ability to reset the IR chip via ioctl like ivtv.  This needs the
mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can
come from a few different asynchronous sources now.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx18: Add locking for struct cx18 GPIO state variables in
anticpation of adding IR microcontroller reset support for
use by external IR modules.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the build error:

smscoreapi.c:689: error: 'uintptr_t' undeclared

Thanks to Peter Schlaf for reporting this.

Cc: Peter Schlaf <peter.schlaf@web.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the following warnings generated by checkpatch.pl:

WARNING: Use #include <linux/io.h> instead of <asm/io.h>
 251: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:30:
+#include <asm/io.h>

WARNING: Use #include <linux/scatterlist.h> instead of <asm/scatterlist.h>
 1566: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:29:
+#include <asm/scatterlist.h>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

saa7134: add a separate entry for the ASUSTeK P7131 analog only
         and do some eeprom detection to escape from the TVFM7135
         with the same PCI subsystem on auto detection.
Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

For VIDIOC_G_FMT/VIDIOC_TRY_FMT, the V4L2 API spec states:
"Drivers should not return an error code unless the input is ambiguous"
"Very simple, inflexible devices may even ignore all input and always
return the default parameters."
"When the requested buffer type is not supported drivers return an
EINVAL error code."
i.e. returning errors for unsupported fields is bad, and it's ok to
unconditionally overwrite user-requested settings

This patch makes ov7670 meet that behaviour, and brings it in line with
other drivers e.g. stk-webcam. It also fixes compatibility with (unpatched)
gstreamer.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch fixes some coding style issues.
It also fixes a NULL de-reference on driver unload.
The permissions for the module parameters were changed to 0644.
Signed-off-by: NDean Anderson <dean@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This has been commented out for years, it's about time to get rid of
it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Assign the following firmware filenames:

sms1xxx-stellar-dvbt-01.fw
sms1xxx-nova-a-dvbt-01.fw
sms1xxx-nova-b-dvbt-01.fw
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add the capability to define device-specific firmware filenames for the SMS1010,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

remove typedef struct mutex kmutex_t
fix one line > 80 columns
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the following build warning:

smscoreapi.c: In function 'smscore_detect_mode':
smscoreapi.c:689: warning: cast from pointer to integer of different size
smscoreapi.c:689: warning: cast to pointer from integer of different size
smscoreapi.c: In function 'smscore_set_device_mode':
smscoreapi.c:820: warning: cast from pointer to integer of different size
smscoreapi.c:820: warning: cast to pointer from integer of different size

...and fix the following OOPS on 64bit kernels:

[  717.263667] usb 6-4: new high speed USB device using ehci_hcd and address 2
[  717.396386] usb 6-4: configuration #1 chosen from 1 choice
[  717.473650] Unable to handle kernel paging request at 0000000000c02000 RIP:
[  717.473657]  [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0
[  717.473669] PGD 3c6f7067 PUD 3d484067 PMD 0
[  717.473674] Oops: 0002 [1] SMP
[  717.473678] CPU 0
[Modules linked in snipped]
[  717.473773] Pid: 8380, comm: modprobe Tainted: P        2.6.24-16-generic #1
[  717.473776] RIP: 0010:[<ffffffff88db9edc>]  [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0
[  717.473784] RSP: 0018:ffff81003d495ba8  EFLAGS: 00010206
[  717.473786] RAX: ffff81003d8cd8d0 RBX: ffff81003d8cd800 RCX: ffff81003d8cd8d0
[  717.473788] RDX: 0000000000000008 RSI: ffff81003f080070 RDI: ffff81003d8cd800
[  717.473791] RBP: 0000000000000004 R08: ffff81003ec0104b R09: ffffffffffffffff
[  717.473793] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000c02000
[  717.473796] R13: 00000000fffffff4 R14: ffff810000c02000 R15: ffff81003d8cd878
[  717.473799] FS:  00007f70a680f6e0(0000) GS:ffffffff805b0000(0000) knlGS:0000000000000000
[  717.473801] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  717.473804] CR2: 0000000000c02000 CR3: 000000003c68b000 CR4: 00000000000006e0
[  717.473806] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  717.473809] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  717.473812] Process modprobe (pid: 8380, threadinfo ffff81003d494000, task ffff81003d2fc000)
[  717.473814] Stack:  ffff81003d8cd800 ffff81003d8cd800 0000000000000000 ffff81003c6d8000
[  717.473820]  ffff81003dcac800 0000000000000008 ffffc20000787bb0 ffffffff88dba16c
[  717.473825]  ffff81003dcac800 000000000000000a 0000000000000000 ffffffff88dbb2fa
[  717.473829] Call Trace:
[  717.473866]  [<ffffffff88dba16c>] :sms1xxx:smscore_start_device+0x1c/0xb0
[  717.473885]  [<ffffffff88dbb2fa>] :sms1xxx:smsusb_probe+0x29a/0x670
[  717.473929]  [<ffffffff88dbaca0>] :sms1xxx:smsusb_sendrequest+0x0/0x30
[  717.473965]  [<ffffffff804614d9>] mutex_lock+0x9/0x20
[  717.473998]  [<ffffffff8806c42e>] :usbcore:usb_autopm_do_device+0x8e/0x130
[  717.474040]  [<ffffffff8806d33a>] :usbcore:usb_probe_interface+0xda/0x160
[  717.474067]  [<ffffffff803b9f4c>] driver_probe_device+0x9c/0x1b0
[  717.474091]  [<ffffffff803ba219>] __driver_attach+0xc9/0xd0
[  717.474107]  [<ffffffff803ba150>] __driver_attach+0x0/0xd0
[  717.474115]  [<ffffffff803b918d>] bus_for_each_dev+0x4d/0x80
[  717.474156]  [<ffffffff803b959c>] bus_add_driver+0xac/0x220
[  717.474203]  [<ffffffff8806cde9>] :usbcore:usb_register_driver+0xa9/0x120
[  717.474232]  [<ffffffff88dbb00b>] :sms1xxx:smsusb_register+0x1b/0x70
[  717.474243]  [<ffffffff88dba50c>] :sms1xxx:smscore_module_init+0x7c/0xb0
[  717.474253]  [<ffffffff80263b6e>] sys_init_module+0x18e/0x1a90
[  717.474426]  [<ffffffff8020c37e>] system_call+0x7e/0x83
[  717.474490]
[  717.474491]
[  717.474492] Code: 66 41 c7 04 24 9c 02 41 c6 44 24 02 00 4c 89 e6 41 c6 44 24
[  717.474506] RIP  [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0
[  717.474513]  RSP <ffff81003d495ba8>
[  717.474515] CR2: 0000000000c02000
[  717.474521] ---[ end trace 52d9c6f207be106a ]---
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Provide an option to enable / disable support for Siano's default usb ids.

This allows the support for Siano's USB IDs to be disabled, so that Siano's
external driver can be used, instead.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>