Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Last part of hop-limit determination is always:
    hoplimit = dst_metric(dst, RTAX_HOPLIMIT);
    if (hoplimit < 0)
        hoplimit = ipv6_get_hoplimit(dst->dev).

Let's consolidate it as ip6_dst_hoplimit(dst).
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Each MIPv6 XFRM state (DSTOPT/RH2) holds either destination or source
address to be mangled in the IPv6 header (that is "CoA").
On Inter-MN communication after both nodes binds each other,
they use route optimized traffic two MIPv6 states applied, and
both source and destination address in the IPv6 header
are replaced by the states respectively.
The packet format is correct, however, next-hop routing search
are not.
This patch fixes it by remembering address pairs for later states.

Based on patch from Masahide NAKAMURA <nakam@linux-ipv6.org>.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

IP layer now can handle multiple namespaces normally. So, process such
packets normally and drop them only if the transport layer is not
aware about namespaces.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass the init_net there for now.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass the init_net there for now.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_options_compile uses inet_addr_type which requires a namespace. The
packet argument is optional, so parameter is the only way to obtain
it. Pass the init_net there for now.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_datamsg_free and sctp_datamsg_track are just aliases for
sctp_datamsg_put and sctp_chunk_hold, respectively.

Saves 32 Bytes on x86.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the first u32 copied from syncookie_secret is overwritten by the
minute-counter four lines below.  After adjusting the destination
address, the size of syncookie_secret can be reduced accordingly.

AFAICS, the only other user of syncookie_secret[] is the ipv6
syncookie support.  Because ipv6 syncookies only grab 44 bytes from
syncookie_secret[], this shouldn't affect them in any way.

With fixes from Glenn Griffin.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NGlenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sorry for the patch sequence confusion :| but I found that the similar
thing can be done for raw sockets easily too late.

Expand the proto.h union with the raw_hashinfo member and use it in
raw_prot and rawv6_prot. This allows to drop the protocol specific
versions of hash and unhash callbacks.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After this we have only udp_lib_get_port to get the port and two 
stubs for ipv4 and ipv6. No difference in udp and udplite except
for initialized h.udp_hash member.

I tried to find a graceful way to drop the only difference between
udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison 
routine), but adding one more callback on the struct proto didn't 
appear such :( Maybe later.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inspired by the commit ab1e0a13 ([SOCK] proto: Add hashinfo member to 
struct proto) from Arnaldo, I made similar thing for UDP/-Lite IPv4 
and -v6 protocols.

The result is not that exciting, but it removes some levels of
indirection in udpxxx_get_port and saves some space in code and text.

The first step is to union existing hashinfo and new udp_hash on the
struct proto and give a name to this union, since future initialization 
of tcpxxx_prot, dccp_vx_protinfo and udpxxx_protinfo will cause gcc 
warning about inability to initialize anonymous member this way.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_options->is_data is assigned only and never checked. The structure is
not a part of kernel interface to the userspace. So, it is safe to remove
this field.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change TCP_DEFER_ACCEPT implementation so that it transitions a
connection to ESTABLISHED after handshake is complete instead of
leaving it in SYN-RECV until some data arrvies. Place connection in
accept queue when first data packet arrives from slow path.

Benefits:
  - established connection is now reset if it never makes it
   to the accept queue

 - diagnostic state of established matches with the packet traces
   showing completed handshake

 - TCP_DEFER_ACCEPT timeouts are expressed in seconds and can now be
   enforced with reasonable accuracy instead of rounding up to next
   exponential back-off of syn-ack retry.
Signed-off-by: NPatrick McManus <mcmanus@ducksong.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the inline trick (same as pr_debug) to get checking of debug
statements even if no code is generated.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduced by 270637ab
("[SCTP]: Fix a race between module load and protosw access")

Reported by Gabriel C:

In file included from net/sctp/sm_statetable.c:50:
include/net/sctp/sctp.h: In function 'sctp_v6_pf_init':
include/net/sctp/sctp.h:392: warning: 'return' with a value, in function returning void
In file included from net/sctp/sm_statefuns.c:62:
include/net/sctp/sctp.h: In function 'sctp_v6_pf_init':
include/net/sctp/sctp.h:392: warning: 'return' with a value, in function returning void
 ...
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the proc for tcp6 to be per namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The proc init/exit functions take a new network namespace parameter in
order to register/unregister /proc/net/udp6 for a namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch, like udp proc, makes the proc functions to take care of
which namespace the socket belongs.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes the common udp proc functions to take care of which
socket they should show taking into account the namespace it belongs.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update: My mailer ate one of Jarek's feedback mails...  Fixed the
parameter in netif_set_gso_max_size() to be u32, not u16.  Fixed the
whitespace issue due to a patch import botch.  Changed the types from
u32 to unsigned int to be more consistent with other variables in the
area.  Also brought the patch up to the latest net-2.6.26 tree.

Update: Made gso_max_size container 32 bits, not 16.  Moved the
location of gso_max_size within netdev to be less hotpath.  Made more
consistent names between the sock and netdev layers, and added a
define for the max GSO size.

Update: Respun for net-2.6.26 tree.

Update: changed max_gso_frame_size and sk_gso_max_size from signed to
unsigned - thanks Stephen!

This patch adds the ability for device drivers to control the size of
the TSO frames being sent to them, per TCP connection.  By setting the
netdevice's gso_max_size value, the socket layer will set the GSO
frame size based on that value.  This will propogate into the TCP
layer, and send TSO's of that size to the hardware.

This can be desirable to help tune the bursty nature of TSO on a
per-adapter basis, where one may have 1 GbE and 10 GbE devices
coexisting in a system, one running multiqueue and the other not, etc.

This can also be desirable for devices that cannot support full 64 KB
TSO's, but still want to benefit from some level of segmentation
offloading.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race is SCTP between the loading of the module
and the access by the socket layer to the protocol functions.
In particular, a list of addresss that SCTP maintains is
not initialized prior to the registration with the protosw.
Thus it is possible for a user application to gain access
to SCTP functions before everything has been initialized.
The problem shows up as odd crashes during connection
initializtion when we try to access the SCTP address list.

The solution is to refactor how we do registration and
initialize the lists prior to registering with the protosw.
Care must be taken since the address list initialization
depends on some other pieces of SCTP initialization.  Also
the clean-up in case of failure now also needs to be refactored.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Comparing with kernel 2.6.24, tbench result has regression with
2.6.25-rc1.

1) On 2 quad-core processor stoakley: 4%.
2) On 4 quad-core processor tigerton: more than 30%.

bisect located below patch.

b4ce9277 is first bad commit
commit b4ce9277
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date:   Tue Nov 13 21:33:32 2007 -0800

    [IPV6]: Move nfheader_len into rt6_info

    The dst member nfheader_len is only used by IPv6.  It's also currently
    creating a rather ugly alignment hole in struct dst.  Therefore this patch
    moves it from there into struct rt6_info.

Above patch changes the cache line alignment, especially member
__refcnt. I did a testing by adding 2 unsigned long pading before
lastuse, so the 3 members, lastuse/__refcnt/__use, are moved to next
cache line. The performance is recovered.

I created a patch to rearrange the members in struct dst_entry.

With Eric and Valdis Kletnieks's suggestion, I made finer arrangement.

1) Move tclassid under ops in case CONFIG_NET_CLS_ROUTE=y. So
   sizeof(dst_entry)=200 no matter if CONFIG_NET_CLS_ROUTE=y/n. I
   tested many patches on my 16-core tigerton by moving tclassid to
   different place. It looks like tclassid could also have impact on
   performance.  If moving tclassid before metrics, or just don't move
   tclassid, the performance isn't good. So I move it behind metrics.

2) Add comments before __refcnt.

On 16-core tigerton:

If CONFIG_NET_CLS_ROUTE=y, the result with below patch is about 18%
better than the one without the patch;

If CONFIG_NET_CLS_ROUTE=n, the result with below patch is about 30%
better than the one without the patch.

With 32bit 2.6.25-rc1 on 8-core stoakley, the new patch doesn't
introduce regression.

Thank Eric, Valdis, and David!
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Acked-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's a horrible slab abuse in net/netfilter/nf_conntrack_extend.c
that can be replaced with a call to ksize().

Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch clarifies the use of IEEE80211_TXCTL_OFDM_HT flag.

Can by united with patch "mac80211: adding mac80211_tx_control
flags and HT flags"
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch makes enum from the defines previously dwelled inside
ieee80211_tx_control for better readability.
The patch also addes HT flags, for 802.11n drivers:
- IEEE80211_TXCTL_OFDM_HT: request low-level driver to use HT OFDM rates
- IEEE80211_TXCTL_GREEN_FIELD: use green field protection
- IEEE80211_TXCTL_DUP_DATA: duplicate data on both 20 Mhz channels
- IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame in 40Mhz width
- IEEE80211_TXCTL_SHORT_GI: send this frame with short guard interval

Tx command can be a combination of any of these flags, along with
bitrate represented by ieee80211_rate. this will allow legacy drivers to
switch easily to any 11n rate representation.
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch make use of the network namespace information at the right
places to handle the multicast for several network namespaces.  It
makes the socket control to be per namespace too.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of having a tcp6_socket global to all the namespace, there is
tcp6 socket control per namespace. That is consistent with which
namespace sent a RST and allows to pass the socket to the underlying
function to retrieve the network namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make ndisc socket control per namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current /proc/net is done with so called "shadows", but current
implementation is broken and has little chances to get fixed.

The problem is that dentries subtree of /proc/net directory has
fancy revalidation rules to make processes living in different
net namespaces see different entries in /proc/net subtree, but
currently, tasks see in the /proc/net subdir the contents of any
other namespace, depending on who opened the file first.

The proposed fix is to turn /proc/net into a symlink, which points
to /proc/self/net, which in turn shows what previously was in
/proc/net - the network-related info, from the net namespace the
appropriate task lives in.

# ls -l /proc/net
lrwxrwxrwx  1 root root 8 Mar  5 15:17 /proc/net -> self/net

In other words - this behaves like /proc/mounts, but unlike
"mounts", "net" is not a file, but a directory.

Changes from v2:
* Fixed discrepancy of /proc/net nlink count and selinux labeling
  screwup pointed out by Stephen.

  To get the correct nlink count the ->getattr callback for /proc/net
  is overridden to read one from the net->proc_net entry.

  To make selinux still work the net->proc_net entry is initialized
  properly, i.e. with the "net" name and the proc_net parent.

Selinux fixes are
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>

Changes from v1:
* Fixed a task_struct leak in get_proc_task_net, pointed out by Paul.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit db1ed684 ("[IPV6]
UDP: Rename IPv6 UDP files."), commit
8be8af8f ("[IPV4] UDP: Move
IPv4-specific bits to other file.") and commit
e898d4db ("[UDP]: Allow users to
configure UDP-Lite.").

First, udplite is of such small cost, and it is a core protocol just
like TCP and normal UDP are.

We spent enormous amounts of effort to make udplite share as much code
with core UDP as possible.  All of that work is less valuable if we're
just going to slap a config option on udplite support.

It is also causing build failures, as reported on linux-next, showing
that the changeset was not tested very well.  In fact, this is the
second build failure resulting from the udplite change.

Finally, the config options provided was a bool, instead of a modular
option.  Meaning the udplite code does not even get build tested
by allmodconfig builds, and furthermore the user is not presented
with a reasonable modular build option which is particularly needed
by distribution vendors.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch eliminates warnings about undeclared symbols.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes code associated with optional, user-specified
fields of the TIPC message header.  Such fields were never
utilized by TIPC, and have now been removed from the protocol
specification.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quite a while ago I started this book. The required kernel-doc
patches have since gone into the tree so it is now possible to
build the book in mainline.

The actual documentation is still rather incomplete and not all
things are linked into the book, but this enables us to edit
the documentation collaboratively, hopefully driver authors can
add documentation based on their experience with mac80211.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Various cleanups, reducing the #ifdef mess and other things.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>