Pass kaddr rather than (incorrect) struct page to kunmap_atomic.
Signed-off-by: NRussell Cattelan <cattelan@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The log lock needs to be held when manipulating the counter
for the number of free journal blocks.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Don't show an empty "Distributed Lock Manager" menu if IP_SCTP=n.

Reported by Dmytro Bagrii in kernel Bugzilla #7268.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This fixes a bug where, in certain cases an uninitialised variable
could cause a dereference of a NULL pointer in gfs2_commit_write().
Also a typo in a comment is fixed at the same time.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix a size calculation error.
The size was incorrect being computed as a
negative length and then being passed to an
unsigned parameter.

This in turn would cause the allocator to
think it needed enough meta data to store
a gigabyte file for every file created.
Signed-off-by: NRussell Cattelan <cattelan@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Calculate a variable in bvec_alloc_bs() only once needed, not earlier
  (bio.o down from 18408 to 18376 Bytes, 32 Bytes saved, probably due to
  data locality improvements).

- Init variable idx to silence a gcc warning which already existed in the
  unmodified original base file (bvec_alloc_bs() handles idx correctly, so
  there's no need for the warning):

	fs/bio.c: In function `bio_alloc_bioset':
	fs/bio.c:169: warning: `idx' may be used uninitialized in this function
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch destroys all the dentries attached to a superblock in one go
by:

 (1) Destroying the tree rooted at s_root.

 (2) Destroying every entry in the anon list, one at a time.

 (3) Each entry in the anon list has its subtree consumed from the leaves
     inwards.

This reduces the amount of work generic_shutdown_super() does, and avoids
iterating through the dentry_unused list.

Note that locking is almost entirely absent in the shrink_dcache_for_umount*()
functions added by this patch.  This is because:

 (1) at the point the filesystem calls generic_shutdown_super(), it is not
     permitted to further touch the superblock's set of dentries, and nor may
     it remove aliases from inodes;

 (2) the dcache memory shrinker now skips dentries that are being unmounted;
     and

 (3) the superblock no longer has any external references through which the VFS
     can reach it.

Given these points, the only locking we need to do is when we remove dentries
from the unused list and the name hashes, which we do a directory's worth at a
time.

We also don't need to guard against reference counts going to zero unexpectedly
and removing bits of the tree we're working on as nothing else can call dput().

A cut down version of dentry_iput() has been folded into
shrink_dcache_for_umount_subtree() function.  Apart from not needing to unlock
things, it also doesn't need to check for inotify watches.

In this version of the patch, the complaint about a dentry still being in use
has been expanded from a single BUG_ON() and now gives much more information.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NNeilBrown <neilb@suse.de>
Acked-by: NIan Kent <raven@themaw.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure all dentries refs are released before calling kill_anon_super() so
that the assumption that generic_shutdown_super() can completely destroy the
dentry tree for there will be no external references holds true.

What was being done in the put_super() superblock op, is now done in the
kill_sb() filesystem op instead, prior to calling kill_anon_super().

This makes the struct autofs_sb_info::root member variable redundant (since
sb->s_root is still available), and so that is removed.  The calls to
shrink_dcache_sb() are also removed since they're also redundant as
shrink_dcache_for_umount() will now be called after the cleanup routine.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NIan Kent <raven@themaw.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure all dentries refs are released before calling kill_block_super()
so that the assumption that generic_shutdown_super() can completely destroy
the dentry tree for there will be no external references holds true.

What was being done in the put_super() superblock op, is now done in the
kill_sb() filesystem op instead, prior to calling kill_block_super().

Changes made in [try #2]:

 (*) reiserfs_kill_sb() now checks that the superblock FS info pointer is set
     before trying to dereference it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A couple of flush_dcache_page()s are missing on the I/O-error paths.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Aince all callers dereference sb, and this function does so earlier too, we
dont need the check.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A couple of HDIO IOCTLs are not yet handled and a few others are marked
as using a pointer rather than an unsigned long.  The formers include:

HDIO_GET_WCACHE, HDIO_GET_ACOUSTIC, HDIO_GET_ADDRESS and
HDIO_GET_BUSSTATE.  The latters are: HDIO_SET_MULTCOUNT,
HDIO_SET_UNMASKINTR, HDIO_SET_KEEPSETTINGS, HDIO_SET_32BIT,
HDIO_SET_NOWERR, HDIO_SET_DMA, HDIO_SET_PIO_MODE and HDIO_SET_NICE.

Additionally 0x330 used to be HDIO_GETGEO_BIG and may be issued by 32-bit
`hdparm' run on a 64-bit kernel making Linux complain loudly.

This is a fix for these issues.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.

According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:

  ---- start of quote man 8 mount ----

  errors=continue / errors=remount-ro / errors=panic

    Define the behaviour when an error is encountered.  (Either ignore
    errors and just mark the file system erroneous and continue, or remount
    the file system read-only, or panic and halt the system.) The default is
    set in the filesystem superblock, and can be changed using tune2fs(8).

  ---- end of quote ----

However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt.  It leads to the incorrect
handle of errors on ext3.

Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:

- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);

- parse_option() does not clean the alternative values and thus something
  like (ERRORS_CONT|ERRORS_RO) can be set;

- if options are omitted, parse_option() does not set any of these options.

Therefore it is possible to set any combination of these options on the ext2:

- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
  options;

- any of them may be set using mount options;

- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
  superblock and other value in mount options;

- and finally all three options may be set by adding third option in remount.

Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles.  However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.

This patch:

EXT2_ERRORS_CONTINUE should be read from the superblock as default value for
error behaviour.  parse_option() should clean the alternative options and
should not change default value taken from the superblock.
Signed-off-by: NVasily Averin <vvs@sw.ru>
Acked-by: NKirill Korotaev <dev@openvz.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.

According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:

  ---- start of quote man 8 mount ----

  errors=continue / errors=remount-ro / errors=panic

    Define the behaviour when an error is encountered.  (Either ignore
    errors and just mark the file system erroneous and continue, or remount
    the file system read-only, or panic and halt the system.) The default is
    set in the filesystem superblock, and can be changed using tune2fs(8).

  ---- end of quote ----

However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt.  It leads to the incorrect
handle of errors on ext3.

Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:

- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);

- parse_option() does not clean the alternative values and thus something
  like (ERRORS_CONT|ERRORS_RO) can be set;

- if options are omitted, parse_option() does not set any of these options.

Therefore it is possible to set any combination of these options on the ext2:

- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
  options;

- any of them may be set using mount options;

- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
  superblock and other value in mount options;

- and finally all three options may be set by adding third option in remount.

Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles.  However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.

This patch:

EXT3_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Acked-by: NVasily Averin <vvs@sw.ru>
Acked-by: NKirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If grow_buffers() is for some reason passed a block number which wants to lie
outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it
will accidentally truncate `index' and will then instnatiate a page at the
wrong pagecache offset.  This causes __getblk_slow() to go into an infinite
loop.

This can happen with corrupted disks, or with software errors elsewhere.

Detect that, and handle it.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement the epoll_pwait system call, that extend the event wait mechanism
with the same logic ppoll and pselect do.  The definition of epoll_pwait
is:

int epoll_pwait(int epfd, struct epoll_event *events, int maxevents,
                 int timeout, const sigset_t *sigmask, size_t sigsetsize);

The difference between the vanilla epoll_wait and epoll_pwait is that the
latter allows the caller to specify a signal mask to be set while waiting
for events.  Hence epoll_pwait will wait until either one monitored event,
or an unmasked signal happen.  If sigmask is NULL, the epoll_pwait system
call will act exactly like epoll_wait.  For the POSIX definition of
pselect, information is available here:

http://www.opengroup.org/onlinepubs/009695399/functions/select.htmlSigned-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Someone's tab key is emitting spaces.  Attempt to repair some of the damage.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current error behaviour for ext2 and ext3 filesystems does not fully
correspond to the documentation and should be fixed.

According to man 8 mount, ext2 and ext3 file systems allow to set one of 3
different on-errors behaviours:

  ---- start of quote man 8 mount ----

  errors=continue / errors=remount-ro / errors=panic

    Define the behaviour when an error is encountered.  (Either ignore
    errors and just mark the file system erroneous and continue, or remount
    the file system read-only, or panic and halt the system.) The default is
    set in the filesystem superblock, and can be changed using tune2fs(8).

  ---- end of quote ----

However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt.  It leads to the incorrect
handle of errors on ext3.

Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:

- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);

- parse_option() does not clean the alternative values and thus something
  like (ERRORS_CONT|ERRORS_RO) can be set;

- if options are omitted, parse_option() does not set any of these options.

Therefore it is possible to set any combination of these options on the ext2:

- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
  options;

- any of them may be set using mount options;

- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
  superblock and other value in mount options;

- and finally all three options may be set by adding third option in remount.

Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles.  However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.

This patch:

EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Acked-by: NVasily Averin <vvs@sw.ru>
Acked-by: NKirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I assume this means "logical sb block".  So call it that.

I still don't understand the name though.  A block is a block.  What's
different about this one?

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_LBD=n, sector_div() expands to a plain old divide.  But ext4 is
_not_ passing in a sector_t as the first argument, so...

fs/built-in.o: In function `ext4_get_group_no_and_offset':
fs/ext4/balloc.c:39: undefined reference to `__umoddi3'
fs/ext4/balloc.c:41: undefined reference to `__udivdi3'
fs/built-in.o: In function `find_group_orlov':
fs/ext4/ialloc.c:278: undefined reference to `__udivdi3'
fs/built-in.o: In function `ext4_fill_super':
fs/ext4/super.c:1488: undefined reference to `__udivdi3'
fs/ext4/super.c:1488: undefined reference to `__umoddi3'
fs/ext4/super.c:1594: undefined reference to `__udivdi3'
fs/ext4/super.c:1601: undefined reference to `__umoddi3'

Fix that up by calling do_div() directly.

Also cast the arg to u64.  do_div() is only defined on u64, and ext4_fsblk_t
is supposed to be opaque.

Note especially the changes to find_group_orlov().  It was attempting to do

	do_div(int, unsigned long long);

which is royally screwed up.  Switched it to plain old divide.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Way too big to inline.

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

move '_hi' bits of block numbers in the larger part of the
block group descriptor structure
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

make block group descriptor larger.
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Previously when in-kernel ext4 block type is sector_t, it's only 4 bits long
under some 32bit arch (when CONFIG_LBD is not on).  So we need to check the
size of sector_t before we read 48bit long on-disk blocks to in-kernel blocks.

These checks are unnecessary now as we changed the in-kernel blocks to
unsigned longlong.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change ext4 in-kernel block type (ext4_fsblk_t) from sector_t to unsigned
long long.  Remove ext4 block type string micro E3FSBLK, replaced with "%llu"

[akpm@osdl.org: build fix]
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In-kernel super block changes to support >32 bit free blocks numbers.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAlexandre Ratchov <alexandre.ratchov@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As we are planning to support 48-bit block numbers for ext4, we need to
support 48-bit block numbers for extended attributes.  In the short term, we
can do this by reuse (on-disk) 16-bit padding (linux2.i_pad1 currently used
only by "hurd") as high order bits for xattr.  This patch basically does that.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

JBD layer in-kernel block varibles type fixes to support >32 bit block number
and convert to sector_t type.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown.  This patch is useful only after adding support for 64-bit block
numbers in the filesystem.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make it possible to add file preallocation support in future as an RO_COMPAT
feature by recognizing uninitialized extents as holes and limiting extent
length to keep the top bit of ee_len free for marking uninitialized extents.
Signed-off-by: NSuparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlex Tomas <alex@clusterfs.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Redefine ext3 in-kernel filesystem block type (ext3_fsblk_t) from unsigned
long to sector_t, to allow kernel to handle  >32 bit ext3 blocks.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32  ee_block;       /* first logical block extent covers */
__le16  ee_len;         /* number of blocks covered by extent */
__le16  ee_start_hi;    /* high 16 bits of physical block */
__le32  ee_start;       /* low 32 bigs of physical block */
};
Signed-off-by: NAlex Tomas <alex@clusterfs.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reworked from a patch by Mingming Cao and Randy Dunlap
Signed-off-By: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

jbd and jbd2 currently use the same slab names which must be unique.  The
patch below just renames jbd2's slabs.
Signed-off-by: NJohann Lombardi <johann.lombardi@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>