- 20 5月, 2014 11 次提交
-
-
由 Mathias Nyman 提交于
Use one timer to control command timeout. start/kick the timer every time a command is completed and a new command is waiting, or a new command is added to a empty list. If the timer runs out, then tag the current command as "aborted", and start the xhci command abortion process. Previously each function that submitted a command had its own timer. If that command timed out, a new command structure for the command was created and it was put on a cancel_cmd_list list, then a pci write to abort the command ring was issued. when the ring was aborted, it checked if the current command was the one to be canceled, later when the ring was stopped the driver got ownership of the TRBs in the command ring, compared then to the TRBs in the cancel_cmd_list, and turned them into No-ops. Now, instead, at timeout we tag the status of the command in the command queue to be aborted, and start the ring abortion. Ring abortion stops the command ring and gives control of the commands to us. All the aborted commands are now turned into No-ops. If the ring is already stopped when the command times outs its not possible to start the ring abortion, in this case the command is turnd to No-op right away. All these changes allows us to remove the entire cancel_cmd_list code. The functions waiting for a command to finish no longer have their own timeouts. They will wait either until the command completes normally, or until the whole command abortion is done. Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathias Nyman 提交于
Remove the per-device command list and handle_cmd_in_cmd_wait_list() and use the completion and status variables found in the command structure in the global command list. Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathias Nyman 提交于
Create a list to store command structures, add a structure to it every time a command is submitted, and remove it from the list once we get a command completion event matching the command. Callers that wait for completion will free their command structures themselves. The other command structures are freed in the command completion event handler. Also add a check that prevents queuing commands if host is dying Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mathias Nyman 提交于
To create a global command queue we require that each command put on the command ring is submitted with a command structure. Functions that queue commands and wait for completion need to allocate a command before submitting it, and free it once completed. The following command queuing functions need to be modified. xhci_configure_endpoint() xhci_address_device() xhci_queue_slot_control() xhci_queue_stop_endpoint() xhci_queue_new_dequeue_state() xhci_queue_reset_ep() xhci_configure_endpoint() xhci_configure_endpoint() could already be called with a command structure, and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These are changed and a command structure is now required. This change also simplifies the configure endpoint command completion handling and the "goto bandwidth_change" handling code can be removed. In some cases the command queuing function is called in interrupt context. These commands needs to be allocated atomically, and they can't wait for completion. These commands will in this patch be freed directly after queuing, but freeing will be moved to the command completion event handler in a later patch once we get the global command queue up.(Just so that we won't leak memory in the middle of the patch set) Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sarah Sharp 提交于
xHCI host controllers may only support a limited number of device slot IDs, which is usually far less than the theoretical maximum number of devices (255) that the USB specifications advertise. This is frustrating to consumers that expect to be able to plug in a large number of devices. Add a print statement when the Enable Slot command fails to show how many devices the host supports. We can't change hardware manufacturer's design decisions, but hopefully we can save customers a little bit of time trying to debug why their host mysteriously fails when too many devices are plugged in. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: NAmund Hov <Amund.Hov@silabs.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
Using the IS_ENABLED() macro can make the code shorter and easier to read. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Williams 提交于
Save someone else the debug cycles of figuring out why a driver's transfer request is failing or causing undefined system behavior. Buffers submitted for dma must come from GFP allocated / DMA-able memory. Return -EAGAIN matching the return value for dma_mapping_error() cases. Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Lin Wang 提交于
This patch fix wrong port number reported when trying to enable/disable USB2.0 hardware LPM. Signed-off-by: NLin Wang <lin.x.wang@intel.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Merge tag 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: for 3.16 merge window Bunch of fixes and a new driver for Exynos5 USB 3.0 PHY.
-
由 Greg Kroah-Hartman 提交于
We need these USB fixes in here as well. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 5月, 2014 3 次提交
-
-
由 Maxime Ripard 提交于
The USB phy controller in the A31 differs mostly from the older controllers because it has a clock dedicated for each phy, while the older ones were having a single clock for all the phys. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Maxime Ripard 提交于
Document the freshly introduced compatible for the USB phy in use in the Allwinner A31 SoC. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Maxime Ripard 提交于
Move the phy initialization and variables declaration to the loop itself, since it is where it really belongs. Also remove all the temporary variables, we can use the structure members directly. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
- 13 5月, 2014 3 次提交
-
-
由 Vivek Gautam 提交于
Adding support to enable/disable VBUS controlled by a regulator, to enable vbus supply on the port. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Vivek Gautam 提交于
Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Vivek Gautam 提交于
Add necessary binding documentation for USB 3.0 DRD PHY present on Exynos5 SoC series. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
- 12 5月, 2014 2 次提交
-
-
由 Arnd Bergmann 提交于
All other phy drivers use 'select', while this one is the only one to use 'depends on'. This is not a bug, just slightly inconsistent, so let's change it to do things the same way as everyone else. We may also want to turn GENERIC_PHY into a silent option that only ever gets turned on if another driver needs it. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Matt Porter <mporter@linaro.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Antoine Ténart 提交于
The phys array is of size EXYNOS_MIPI_PHYS_NUM. Trying to access the index EXYNOS_MIPI_PHYS_NUM should return an error. Fixes: 069d2e26 "phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs" Signed-off-by: NAntoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
- 10 5月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A somewhat unpleasantly large collection of small fixes. The big ones are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It was using __init functions with predictably suboptimal results. Another key fix is a build fix which would produce output that simply would not decompress correctly in some configuration, due to the existing Makefiles picking up an unfortunate local label and mistaking it for the global symbol _end. Additional fixes include the handling of 64-bit numbers when setting the vdso data page (a latent bug which became manifest when i386 started exporting a vdso with time functions), a fix to the new MSR manipulation accessors which would cause features to not get properly unblocked, a build fix for 32-bit userland, and a few new platform quirks" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall() x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro x86: Fix typo preventing msr_set/clear_bit from having an effect x86/intel: Add quirk to disable HPET for the Baytrail platform x86/hpet: Make boot_hpet_disable extern x86-64, build: Fix stack protector Makefile breakage with 32-bit userland x86/reboot: Add reboot quirk for Certec BPC600 asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/* asmlinkage, x86: Add explicit __visible to arch/x86/* asmlinkage: Revert "lto: Make asmlinkage __visible" x86, build: Don't get confused by local symbols x86/efi: earlyprintk=efi,keep fix
-
- 09 5月, 2014 8 次提交
-
-
由 Boris Ostrovsky 提交于
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall() may lose upper bits or, worse, add them since compiler will do this: (u64)(tk->wall_to_monotonic.tv_nsec << tk->shift) instead of ((u64)tk->wall_to_monotonic.tv_nsec << tk->shift) So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in the subsequent 'while' loop. We need an explicit cast. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.comAcked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # v3.14 Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Andres Freund 提交于
The spuriously added semicolon didn't have any effect because the macro isn't currently in use. c0a639adSigned-off-by: NAndres Freund <andres@anarazel.de> Link: http://lkml.kernel.org/r/1399598957-7011-3-git-send-email-andres@anarazel.de Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Andres Freund 提交于
Due to a typo the msr accessor function introduced in 22085a66 didn't have any lasting effects because they accidentally wrote the old value back. After c0a639ad this at the very least this causes cpuid limits not to be lifted on some cpus leading to missing capabilities for those. Signed-off-by: NAndres Freund <andres@anarazel.de> Link: http://lkml.kernel.org/r/1399598957-7011-2-git-send-email-andres@anarazel.de Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "The main fix is adding support for default ACLs on O_TMPFILE opened inodes to bring XFS into line with other filesystems. Metadata CRCs are now also considered well enough tested to be fully supported, so we're removing the shouty warnings issued at mount time for filesystems with that format. And there's transaction block reservation overrun fix. Summary: - fix a remote attribute size calculation bug that leads to a transaction overrun - add default ACLs to O_TMPFILE files - Remove the EXPERIMENTAL tag from filesystems with metadata CRC support" * tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs: xfs: remote attribute overwrite causes transaction overrun xfs: initialize default acls for ->tmpfile() xfs: fully support v5 format filesystems
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This contains two fixes. The first is a long standing bug that causes bogus data to show up in the refcnt field of the module_refcnt tracepoint. It was introduced by a merge conflict resolution back in 2.6.35-rc days. The result should be 'refcnt = incs - decs', but instead it did 'refcnt = incs + decs'. The second fix is to a bug that was introduced in this merge window that allowed for a tracepoint funcs pointer to be used after it was freed. Moving the location of where the probes are released solved the problem" * tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix use of tracepoint funcs after rcu free trace: module: Maintain a valid user count
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: "Just a few fixups to various drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - fix touchpad initialization on Gigabyte U2442 Input: tca8418 - fix loading this driver as a module from a device tree Input: bma150 - extend chip detection for bma180 Input: atkbd - fix keyboard not working on some LG laptops Input: synaptics - add min/max quirk for ThinkPad Edge E431
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A bunch of small fixes for USB-audio and HD-audio, where most of them are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI offline state fix, and a couple of device-specific quirks" * tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - hdmi: Set converter channel count even without sink ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data ALSA: usb-audio: Fix deadlocks at resuming ALSA: usb-audio: Save mixer status only once at suspend ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined ALSA: hda - add headset mic detect quirk for a Dell laptop
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull mmc/rtsx revert from Lee Jones. * tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
-
- 08 5月, 2014 11 次提交
-
-
由 Arnd Bergmann 提交于
If the license string doesn't match exactly, the module refuses to load. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Roger Quadros 提交于
Add "wkupclk" and "refclk" information to DT binding information. Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Roger Quadros 提交于
As clocks might be named differently on multiple platforms, use a generic name in the driver and allow device tree node to specify the platform specific clock name. Reviewed-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Mathieu Desnoyers 提交于
Commit de7b2973 "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" introduces a use after free by calling release_probes on the old struct tracepoint array before the newly allocated array is published with rcu_assign_pointer. There is a race window where tracepoints (RCU readers) can perform a "use-after-grace-period-after-free", which shows up as a GPF in stress-tests. Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.comReported-by: NSasha Levin <sasha.levin@oracle.com> CC: Oleg Nesterov <oleg@redhat.com> CC: Dave Jones <davej@redhat.com> Fixes: de7b2973 "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Romain Izard 提交于
The replacement of the 'count' variable by two variables 'incs' and 'decs' to resolve some race conditions during module unloading was done in parallel with some cleanup in the trace subsystem, and was integrated as a merge. Unfortunately, the formula for this replacement was wrong in the tracing code, and the refcount in the traces was not usable as a result. Use 'count = incs - decs' to compute the user count. Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.comAcked-by: NIngo Molnar <mingo@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: stable@vger.kernel.org # 2.6.35 Fixes: c1ab9cab "merge conflict resolution" Signed-off-by: NRomain Izard <romain.izard.pro@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Micky Ching 提交于
This reverts commit c42deffd. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: NMicky Ching <micky_ching@realsil.com.cn> Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Feng Tang 提交于
HPET on current Baytrail platform has accuracy problem to be used as reliable clocksource/clockevent, so add a early quirk to disable it. Signed-off-by: NFeng Tang <feng.tang@intel.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1398327498-13163-2-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Feng Tang 提交于
HPET on some platform has accuracy problem. Making "boot_hpet_disable" extern so that we can runtime disable the HPET timer by using quirk to check the platform. Signed-off-by: NFeng Tang <feng.tang@intel.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1398327498-13163-1-git-send-email-feng.tang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fix from Brian Norris: "A single update for Keystone SoC's, whose NAND controller does not support subpage programming" * tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd: mtd: davinci-nand: disable subpage write for keystone-nand
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - fix a small bug in computation of report size, which might cause some devices (Atmel touchpad found on the Samsung Ativ 9) to reject reports with otherwise valid contents - a few device-ID specific quirks/additions piggy-backing on top of it * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S HID: core: fix computation of the report size HID: multitouch: add support of EliteGroup 05D8 panels
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull radeon mullins support from Dave Airlie: "This is support for the new AMD mullins APU, it pretty much just adds support to the driver in the all the right places, and is pretty low risk wrt other GPUs" Oh well. I guess it ends up fitting under "support new hardware" for merging late. * 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
-