Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 2 年 前同步成功

通知 173
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 23 3月, 2018 1 次提交
  3. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX license identifier to uapi header files with a license · e2be04c7
      由 Greg Kroah-Hartman 提交于 
      Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e2be04c7
  5. 27 8月, 2016 2 次提交
  7. 19 8月, 2016 1 次提交
  9. 27 7月, 2016 3 次提交
  11. 06 3月, 2015 1 次提交
  13. 22 11月, 2014 14 次提交
  15. 24 8月, 2014 5 次提交
  17. 17 7月, 2014 1 次提交
  19. 28 6月, 2014 2 次提交
    • J
      tipc: simplify connection congestion handling · 60120526
      由 Jon Paul Maloy 提交于 
      As a consequence of the recently introduced serialized access
to the socket in commit 8d94168a761819d10252bab1f8de6d7b202c3baa
("tipc: same receive code path for connection protocol and data
messages") we can make a number of simplifications in the
detection and handling of connection congestion situations.

- We don't need to keep two counters, one for sent messages and one
  for acked messages. There is no longer any risk for races between
  acknowledge messages arriving in BH and data message sending
  running in user context. So we merge this into one counter,
  'sent_unacked', which is incremented at sending and subtracted
  from at acknowledge reception.

- We don't need to set the 'congested' field in tipc_port to
  true before we sent the message, and clear it when sending
  is successful. (As a matter of fact, it was never necessary;
  the field was set in link_schedule_port() before any wakeup
  could arrive anyway.)

- We keep the conditions for link congestion and connection connection
  congestion separated. There would otherwise be a risk that an arriving
  acknowledge message may wake up a user sleeping because of link
  congestion.

- We can simplify reception of acknowledge messages.

We also make some cosmetic/structural changes:

- We rename the 'congested' field to the more correct 'link_cong´.

- We rename 'conn_unacked' to 'rcv_unacked'

- We move the above mentioned fields from struct tipc_port to
  struct tipc_sock.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      60120526
    • J
      tipc: clean up connection protocol reception function · ac0074ee
      由 Jon Paul Maloy 提交于 
      We simplify the code for receiving connection probes, leveraging the
recently introduced tipc_msg_reverse() function. We also stick to
the principle of sending a possible response message directly from
the calling (tipc_sk_rcv or backlog_rcv) functions, hence making
the call chain shallower and easier to follow.

We make one small protocol change here, allowed according to
the spec. If a protocol message arrives from a remote socket that
is not the one we are connected to, we are currently generating a
connection abort message and send it to the source. This behavior
is unnecessary, and might even be a security risk, so instead we
now choose to only ignore the message. The consequnce for the sender
is that he will need longer time to discover his mistake (until the
next timeout), but this is an extreme corner case, and may happen
anyway under other circumstances, so we deem this change acceptable.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ac0074ee
  21. 15 5月, 2014 2 次提交
    • J
      tipc: merge port message reception into socket reception function · 9816f061
      由 Jon Paul Maloy 提交于 
      In order to reduce complexity and save a call level during message
reception at port/socket level, we remove the function tipc_port_rcv()
and merge its functionality into tipc_sk_rcv().
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9816f061
    • J
      tipc: compensate for double accounting in socket rcv buffer · 4f4482dc
      由 Jon Paul Maloy 提交于 
      The function net/core/sock.c::__release_sock() runs a tight loop
to move buffers from the socket backlog queue to the receive queue.

As a security measure, sk_backlog.len of the receiving socket
is not set to zero until after the loop is finished, i.e., until
the whole backlog queue has been transferred to the receive queue.
During this transfer, the data that has already been moved is counted
both in the backlog queue and the receive queue, hence giving an
incorrect picture of the available queue space for new arriving buffers.

This leads to unnecessary rejection of buffers by sk_add_backlog(),
which in TIPC leads to unnecessarily broken connections.

In this commit, we compensate for this double accounting by adding
a counter that keeps track of it. The function socket.c::backlog_rcv()
receives buffers one by one from __release_sock(), and adds them to the
socket receive queue. If the transfer is successful, it increases a new
atomic counter 'tipc_sock::dupl_rcvcnt' with 'truesize' of the
transferred buffer. If a new buffer arrives during this transfer and
finds the socket busy (owned), we attempt to add it to the backlog.
However, when sk_add_backlog() is called, we adjust the 'limit'
parameter with the value of the new counter, so that the risk of
inadvertent rejection is eliminated.

It should be noted that this change does not invalidate the original
purpose of zeroing 'sk_backlog.len' after the full transfer. We set an
upper limit for dupl_rcvcnt, so that if a 'wild' sender (i.e., one that
doesn't respect the send window) keeps pumping in buffers to
sk_add_backlog(), he will eventually reach an upper limit,
(2 x TIPC_CONN_OVERLOAD_LIMIT). After that, no messages can be added
to the backlog, and the connection will be broken. Ordinary, well-
behaved senders will never reach this buffer limit at all.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f4482dc
  23. 13 3月, 2014 3 次提交
  25. 18 6月, 2013 1 次提交
    • Y
      tipc: change socket buffer overflow control to respect sk_rcvbuf · cc79dd1b
      由 Ying Xue 提交于 
      As per feedback from the netdev community, we change the buffer
overflow protection algorithm in receiving sockets so that it
always respects the nominal upper limit set in sk_rcvbuf.

Instead of scaling up from a small sk_rcvbuf value, which leads to
violation of the configured sk_rcvbuf limit, we now calculate the
weighted per-message limit by scaling down from a much bigger value,
still in the same field, according to the importance priority of the
received message.

To allow for administrative tunability of the socket receive buffer
size, we create a tipc_rmem sysctl variable to allow the user to
configure an even bigger value via sysctl command.  It is a size of
three (min/default/max) to be consistent with things like tcp_rmem.

By default, the value initialized in tipc_rmem[1] is equal to the
receive socket size needed by a TIPC_CRITICAL_IMPORTANCE message.
This value is also set as the default value of sk_rcvbuf.
Originally-by: NJon Maloy <jon.maloy@ericsson.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
[Ying: added sysctl variation to Jon's original patch]
Signed-off-by: NYing Xue <ying.xue@windriver.com>
[PG: don't compile sysctl.c if not config'd; add Documentation]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cc79dd1b
  27. 14 7月, 2012 3 次提交
    • E
      tipc: remove print_buf and deprecated log buffer code · 869dd466
      由 Erik Hugne 提交于 
      The internal log buffer handling functions can now safely be
removed since there is no code using it anymore.  Requests to
interact with the internal tipc log buffer over netlink (in
config.c) will report 'obsolete command'.

This represents the final removal of any references to a
struct print_buf, and the removal of the struct itself.
We also get rid of a TIPC specific Kconfig in the process.

Finally, log.h is removed since it is not needed anymore.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      869dd466
    • E
      tipc: phase out most of the struct print_buf usage · dc1aed37
      由 Erik Hugne 提交于 
      The tipc_printf is renamed to tipc_snprintf, as the new name
describes more what the function actually does.  It is also
changed to take a buffer and length parameter and return
number of characters written to the buffer.  All callers of
this function that used to pass a print_buf are updated.

Final removal of the struct print_buf itself will be done
synchronously with the pending removal of the deprecated
logging code that also was using it.

Functions that build up a response message with a list of
ports, nametable contents etc. are changed to return the number
of characters written to the output buffer. This information
was previously hidden in a field of the print_buf struct, and
the number of chars written was fetched with a call to
tipc_printbuf_validate.  This function is removed since it
is no longer referenced nor needed.

A generic max size ULTRA_STRING_MAX_LEN is defined, named
in keeping with the existing TIPC_TLV_ULTRA_STRING, and the
various definitions in port, link and nametable code that
largely duplicated this information are removed.  This means
that amount of link statistics that can be returned is now
increased from 2k to 32k.

The buffer overflow check is now done just before the reply
message is passed over netlink or TIPC to a remote node and
the message indicating a truncated buffer is changed to a less
dramatic one (less CAPS), placed at the end of the message.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      dc1aed37
    • E
      tipc: simplify print buffer handling in tipc_printf · e2dbd601
      由 Erik Hugne 提交于 
      tipc_printf was previously used both to construct debug traces
and to append data to buffers that should be sent over netlink
to the tipc-config application.  A global print_buffer was
used to format the string before it was copied to the actual
output buffer.  This could lead to concurrent access of the
global print_buffer, which then had to be lock protected.
This is simplified by changing tipc_printf to append data
directly to the output buffer using vscnprintf.

With the new implementation of tipc_printf, there is no longer
any risk of concurrent access to the internal log buffer, so
the lock (and the comments describing it) are no longer
strictly necessary.  However, there are still a few functions
that do grab this lock before resizing/dumping the log
buffer.  We leave the lock, and these functions untouched since
they will be removed with a subsequent commit that drops the
deprecated log buffer handling code
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      e2dbd601