This patch introduces a struct with two new fields in
vcpu_arch for x86:

	* fault.address
	* fault.error_code

This will be used to correctly propagate page faults back
into the guest when we could have either an ordinary page
fault or a nested page fault. In the case of a nested page
fault the fault-address is different from the original
address that should be walked. So we need to keep track
about the real fault-address.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch changes is_rsvd_bits_set() function prototype to
take only a kvm_mmu context instead of a full vcpu.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Some logic of the init_kvm_softmmu function is required to
build the Nested Nested Paging context. So factor the
required logic into a seperate function and export it.
Also make the whole init path suitable for more than one mmu
context.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces an inject_page_fault function pointer
into struct kvm_mmu which will be used to inject a page
fault. This will be used later when Nested Nested Paging is
implemented.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This function pointer in the MMU context is required to
implement Nested Nested Paging.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces a special set_tdp_cr3 function pointer
in kvm_x86_ops which is only used for tpd enabled mmu
contexts. This allows to remove some hacks from svm code.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This is necessary to implement Nested Nested Paging. As a
side effect this allows some cleanups in the SVM nested
paging code.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch changes the tdp_enabled flag from its global
meaning to the mmu-context and renames it to direct_map
there. This is necessary for Nested SVM with emulation of
Nested Paging where we need an extra MMU context to shadow
the Nested Nested Page Table.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch fixes 32 bit legacy paging with NPT enabled. The
mmu_check_root call on the top-level of the loop causes
root_gfn to take values (in the tdp_enabled path) which are
outside of guest memory. So the mmu_check_root call fails at
some point in the loop interation causing the guest to
tiple-fault.
This patch changes the mmu_check_root calls to the places
where they are really necessary. As a side-effect it
introduces a check for the root of a pae page table too.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add a r/w module parameter named 'mmu_audit', it can control audit
enable/disable:

enable:
  echo 1 > /sys/module/kvm/parameters/mmu_audit

disable:
  echo 0 > /sys/module/kvm/parameters/mmu_audit

This patch not change the logic
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Nothing is checked in count_rmaps(), so remove it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).

This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()

And it adds 'notrap' ptes check in unsync/direct sps
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The audit code reports some sp not write protected in current code, it's just the
bug in audit_write_protection(), since:

- the invalid sp not need write protected
- using uninitialize local variable('gfn')
- call kvm_mmu_audit() out of mmu_lock's protection
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The read-only spte also has reverse mapping, so fix the code to check them,
also modify the function name to fit its doing
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

fix:

arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access

If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Latest kvm mmu_shrink code rework makes kernel changes kvm->arch.n_used_mmu_pages/
kvm->arch.n_max_mmu_pages at kvm_mmu_free_page/kvm_mmu_alloc_page, which is called
by kvm_mmu_commit_zap_page. So the kvm->arch.n_used_mmu_pages or
kvm_mmu_available_pages(vcpu->kvm) is unchanged after kvm_mmu_prepare_zap_page(),
This caused kvm_mmu_change_mmu_pages/__kvm_mmu_free_some_pages loops forever.
Moving kvm_mmu_commit_zap_page would make the while loop performs as normal.
Reported-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Tested-by: NAvi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Of slab shrinkers, the VM code says:

 * Note that 'shrink' will be passed nr_to_scan == 0 when the VM is
 * querying the cache size, so a fastpath for that case is appropriate.

and it *means* it.  Look at how it calls the shrinkers:

    nr_before = (*shrinker->shrink)(0, gfp_mask);
    shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);

So, if you do anything stupid in your shrinker, the VM will doubly
punish you.

The mmu_shrink() function takes the global kvm_lock, then acquires
every VM's kvm->mmu_lock in sequence.  If we have 100 VMs, then
we're going to take 101 locks.  We do it twice, so each call takes
202 locks.  If we're under memory pressure, we can have each cpu
trying to do this.  It can get really hairy, and we've seen lock
spinning in mmu_shrink() be the dominant entry in profiles.

This is guaranteed to optimize at least half of those lock
aquisitions away.  It removes the need to take any of the locks
when simply trying to count objects.

A 'percpu_counter' can be a large object, but we only have one
of these for the entire system.  There are not any better
alternatives at the moment, especially ones that handle CPU
hotplug.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Doing this makes the code much more readable.  That's
borne out by the fact that this patch removes code.  "used"
also happens to be the number that we need to return back to
the slab code when our shrinker gets called.  Keeping this
value as opposed to free makes the next patch simpler.

So, 'struct kvm' is kzalloc()'d.  'struct kvm_arch' is a
structure member (and not a pointer) of 'struct kvm'.  That
means they start out zeroed.  I _think_ they get initialized
properly by kvm_mmu_change_mmu_pages().  But, that only happens
via kvm ioctls.

Another benefit of storing 'used' intead of 'free' is
that the values are consistent from the moment the structure is
allocated: no negative "used" value.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

arch.n_alloc_mmu_pages is a poor choice of name. This value truly
means, "the number of pages which _may_ be allocated".  But,
reading the name, "n_alloc_mmu_pages" implies "the number of allocated
mmu pages", which is dead wrong.

It's really the high watermark, so let's give it a name to match:
nr_max_mmu_pages.  This change will make the next few patches
much more obvious and easy to read.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

"free" is a poor name for this value.  In this context, it means,
"the number of mmu pages which this kvm instance should be able to
allocate."  But "free" implies much more that the objects are there
and ready for use.  "available" is a much better description, especially
when you see how it is calculated.

In this patch, we abstract its use into a function.  We'll soon
replace the function's contents by calculating the value in a
different way.

All of the reads of n_free_mmu_pages are taken care of in this
patch.  The modification sites will be handled in a patch
later in the series.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Mark page dirty only when this page is really written, it's more exacter,
and also can fix dirty page marking in speculation path
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce spte_has_volatile_bits() function to judge whether spte
bits will miss, it's more readable and can help us to cleanup code
later
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

It's a small cleanup that using using kvm_set_pfn_accessed() instead
of mark_page_accessed()
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After commit 53383eaad08d, the '*spte' has updated before call
rmap_remove()(in most case it's 'shadow_trap_nonpresent_pte'), so
remove this information from error message
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

KVM ended up having to put a pretty ugly wrapper around set_64bit()
in order to get the type right.  Now set_64bit() takes the expected
u64 type, and this wrapper can be cleaned up.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <4C5C4E7A.8040603@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes, atomically set spte is not needed, this patch call __xchg_spte()
more smartly

Note: if the old mapping's access bit is already set, we no need atomic operation
since the access bit is not lost
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce set_spte_track_bits() to cleanup current code
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the old mapping is not present, the spte.a is not lost, so no need
atomic operation to set it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In sync-page path, if spte.writable is changed, it will lose page dirty
tracking, for example:

assume spte.writable = 0 in a unsync-page, when it's synced, it map spte
to writable(that is spte.writable = 1), later guest write spte.gfn, it means
spte.gfn is dirty, then guest changed this mapping to read-only, after it's
synced,  spte.writable = 0

So, when host release the spte, it detect spte.writable = 0 and not mark page
dirty
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In current code, if ept is enabled(shadow_accessed_mask = 0), the page
accessed tracking is lost.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In the speculative path, we should check guest pte's reserved bits just as
the real processor does
Reported-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The index wasn't calculated correctly (off by one) for huge spte so KVM guest
was unstable with transparent hugepages.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NReviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add a helper to verify that a direct shadow page is valid wrt the required
access permissions; drop the page if it is not valid.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To clarify spte fetching code, move large spte handling into a helper.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To avoid split accesses to 64 bit sptes on i386, use __set_spte() to link
shadow pages together.

(not technically required since shadow pages are __GFP_KERNEL, so upper 32
bits are always clear)
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To simplify the process of fetching an spte, add a helper that links
a shadow page to an spte.
Reviewed-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>