according to customer request, VT1702 AA-Path max volume (12 dB) is too
high, so limit to 0 dB.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

IS_VT17*_VENDORID macros are used nowhere, so clean them up.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NLogan Li <loganli@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow Nvidia HDMI to support more possible sample rates and formats.
At best, the really supported rates and formats should be determined
together with the negotiation with the HDMI receiver, but it's currently
not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3
standard in this regard).  As a compromise, we enable all bits, assuming
that all recent devices do support such rates/formats.
Tested-by: NAlan Alan <alanwww1@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w
design different from other siblings), it needs to call fixup_automic_adc()
explicitly to set up the auto-mic routing.  Otherwise the indices for
int/ext mics aren't set properly.

Reference: Novell bnc#544899
	http://bugzilla.novell.com/show_bug.cgi?id=544899Signed-off-by: NTakashi Iwai <tiwai@suse.de>

alc_subsystem_id() tries to pick up a headphone pin if not configured,
but this caused side-effects as the problem in commit
15870f05.

This patch fixes the driver behavior to pick up invalid HP pins; at least,
the pins that are listed as the primary outputs aren't taken any more.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASUS A7K needs additional GPIO1 bit setup; it has to be cleared.
Added a new fixup hook for this laptop so that it works as is.

Refernece: Novell bnc#494309
	http://bugzilla.novell.com/show_bug.cgi?id=494309Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent auto-parser doesn't work for machines with a single output
with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
the hp_pins[0] while it's listed in line_outs[0].
This ends up with the doubled initialization of the same mixer widget,
and it mutes the DAC route because hp_pins has no DAC assigned.

To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
so that they are really detected pins.

Reference: Novell bnc#544161
	http://bugzilla.novell.com/show_bug.cgi?id=544161Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use a common helper to create playback controls.
This gives less chance of typos.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The auto-parser for ALC662/663/272 codecs doesn't work properly when
a speaker is connected to mono NID 0x17, and doesn't handle the dynamic
DAC assignment properly.

This patch fixes the issues and also improves the assignment of DACs
so that HP and speakers can have independent volume controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the auto-mic switching between an analog and a digital mic is
needed with IDT codecs, the current driver doesn't reset the connection
of the digital mux.

This patch fixes the behavior by checking both mux connections properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Patch was tested on Toshiba NB200 and is found to enable sound.
Signed-off-by: NManoj Iyer <manoj.iyer@canonical.com>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit fdbc6626, I mistakenly
replaced the capture mixer array for ALC268_ACER to nosrc version
although this should be kept to alt_mixer.  Now fixed back.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reference: ALSA bug #0004614
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614

port-A (0x11)      - front hp-out
port-D (0x12)      - rear line out
port-E (0x1c)      - front mic-in
port-F (0x16)      - Internal speakers
digital-mic (0x17) - Internal mic

init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware
Signed-off-by: NMiguel de Barros <miguel.de.barros@bluewin.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the recent kernel can handle MSI properly on non-Intel platforms,
let's enable MSI as default.

If any borken device is found, we can add the quirk entry to the list,
which is currently empty.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

.. duplicated by merging the same fix twice, for details see commit
0d9df251 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following commit made console open fails while booting:

	commit b50989dc
	Author: Alan Cox <alan@linux.intel.com>
	Date:   Sat Sep 19 13:13:22 2009 -0700

	tty: make the kref destructor occur asynchronously

Due to tty release routines run in a workqueue now, error like the
following will be reported while booting:

INIT open /dev/console Input/output error

It also causes hibernation regression to appear as reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14229

The reason is that now there's latency issue with closing, but when
we open a "closing not finished" tty, -EIO will be returned.

Fix it as per the following Alan's suggestion:

  Fun but it's actually not a bug and the fix is wrong in itself as
  the port may be closing but not yet being destructed, in which case
  it seems to do the wrong thing.  Opening a tty that is closing (and
  could be closing for long periods) is supposed to return -EIO.

  I suspect a better way to deal with this and keep the old console
  timing is to split tty->shutdown into two functions.

  tty->shutdown() - called synchronously just before we dump the tty
  onto the waitqueue for destruction

  tty->cleanup() - called when the destructor runs.

  We would then do the shutdown part which can occur in IRQ context
  fine, before queueing the rest of the release (from tty->magic = 0
  ...  the end) to occur asynchronously

  The USB update in -next would then need a call like

       if (tty->cleanup)
               tty->cleanup(tty);

  at the top of the async function and the USB shutdown to be split
  between shutdown and cleanup as the USB resource cleanup and final
  tidy cannot occur synchronously as it needs to sleep.

  In other words the logic becomes

       final kref put
               make object unfindable

       async
               clean it up
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
[ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ]
Signed-off-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
[ Changed serial naming to match new rules, dropped tty_shutdown as per
  comments from Alan Stern  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3d5b6fb4 ("ACPI: Kill overly
verbose "power state" log messages") removed the actual use of this
variable, but didn't remove the variable itself, resulting in build
warnings like

  drivers/acpi/processor_idle.c: In function ‘acpi_processor_power_init’:
  drivers/acpi/processor_idle.c:1169: warning: unused variable ‘i’

Just get rid of the now unused variable.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Eliminate needless reprogramming of clock events device

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: IA64=y ACPI=n build fix
  ACPI: Kill overly verbose "power state" log messages
  ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression
  ACPI: Clarify resource conflict message
  thinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problem

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix hwpoison code related build failure on 32-bit NUMAQ

ia64's sim_defconfig uses CONFIG_ACPI=n
which now #define's acpi_disabled in <linux/acpi.h>

So we shouldn't re-define it here in <asm/acpi.h>
Signed-off-by: NLen Brown <len.brown@intel.com>

I was recently lucky enough to get a 64-CPU system, so my kernel log
ends up with 64 lines like:

    ACPI: CPU0 (power states: C1[C1] C2[C3])

This is pretty useless clutter because this info is already available
after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as
well as /proc/acpi/processor/CPU*/power.

So just delete the code that prints the C-states in processor_idle.c.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This build failure triggers:

 In file included from include/linux/suspend.h:8,
                 from arch/x86/kernel/asm-offsets_32.c:11,
                 from arch/x86/kernel/asm-offsets.c:2:
 include/linux/mm.h:503:2: error: #error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS

Because due to the hwpoison page flag we ran out of page
flags on 32-bit.

Dont turn on hwpoison on 32-bit NUMA (it's rare in any
case).

Also clean up the Kconfig dependencies in the generic MM
code by introducing ARCH_SUPPORTS_MEMORY_FAILURE.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Don't disable ARB_DISABLE when the familary ID is 0x0F.

http://bugzilla.kernel.org/show_bug.cgi?id=14211

This was a 2.6.31 regression, and so this patch
needs to be applied to 2.6.31.stable
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The message "ACPI: Device needs an ACPI driver" is misleading. The
device _may_ need an ACPI driver, if the BIOS implemented a custom
API for the device in question (which, AFAIK, can't be checked.) If
not, then either a generic ACPI driver may be used (for example
"thermal"), or nothing can be done (other than a white list).

I propose to reword the message to:

ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver

which I think is more correct. Comments and suggestions welcome.

I also added a message warning about possible problems and system
instability when users pass acpi_enforce_resources=lax, as suggested
by Len.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fix this problem when CONFIG_THINKPAD_ACPI_HOTKEY_POLL is undefined:

  CHECK   drivers/platform/x86/thinkpad_acpi.c
drivers/platform/x86/thinkpad_acpi.c:1968:21: error: not an lvalue
  CC [M]  drivers/platform/x86/thinkpad_acpi.o
drivers/platform/x86/thinkpad_acpi.c: In function 'tpacpi_hotkey_driver_mask_set':
drivers/platform/x86/thinkpad_acpi.c:1968: error: lvalue required as left operand of assignment
Reported-by: NNoah Dain <noahdain@gmail.com>
Reported-by: NAudrius Kazukauskas <audrius@neutrino.lt>
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] implement ticket locks for Itanium

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  alpha: fix build after vmlinux.lds.S cleanup
  mips: fix build of vmlinux.lds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: move leds-clevo-mail's probe function to .devinit.text
  leds: Fix indentation in LEDS_LP3944 Kconfig entry
  leds: Fix LED names 
  leds: Fix leds-pca9532 whitespace issues
  leds: fix coding style in worker thread code for ledtrig-gpio.
  leds: gpio-leds: fix typographics fault
  leds: Add WM831x status LED driver

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: new driver for ADP5520/ADP5501 MFD PMICs
  backlight: extend event support to also support poll()
  backlight/eeepc-laptop: Update the backlight state when we change brightness
  backlight/acpi: Update the backlight state when we change brightness
  backlight: Allow drivers to update the core, and generate events on changes
  backlight: switch to da903x driver to dev_pm_ops
  backlight: Add support for the Avionic Design Xanthos backlight device.
  backlight: spi driver for LMS283GF05 LCD
  backlight: move hp680-bl's probe function to .devinit.text
  backlight: Add support for new Apple machines.
  backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
  backlight: Add WM831x backlight driver

Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c

* remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h
  is enough for atomic_t
* remove linux/kref.h inclusion from files which do not need it.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Add memory barrier commentary to futex_wait_queue_me()
  futex: Fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me()
  futex: Correct futex_q woken state commentary
  futex: Make function kernel-doc commentary consistent
  futex: Correct queue_me and unqueue_me commentary
  futex: Correct futex_wait_requeue_pi() commentary

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Dont use openat()
  perf tools: Fix buffer allocation
  perf tools: .gitignore += perf*.html
  perf tools: Handle relative paths while loading module symbols
  perf tools: Fix module symbol loading bug
  perf_event, x86: Fix 'perf sched record' crashing the machine
  perf_event: Update PERF_EVENT_FORK header definition
  perf stat: Fix zero total printouts